Copper and nickel is a common alloy used to manufacture various fittings. The components used in this alloy vary depending upon the application that they are going to be used in. Copper Nickel, 70/30 Pipe Fittings are made up of copper and nickel alloy that contains 70% copper and 30 percent nickel. It offers good resistance to crevice corrosion and pitting in the marine environment. Werkstoff Nr. 2.0882 Reducing Tee manufacturer In India recommends these fittings as they offer good strength and toughness. Along with resistance to biofuels.
ASTM B466 UNS C71500 Long Stub End is easy to fabricate and weld and can be used in polluted seawater or high velocity water. They can be fabricated or cold worked without the need for special material. Welding back rings, flexible metal hose weld wire, and boiler parts can be made using these fittings. Cu-Ni 70/30 Buttweld Elbow is also used in saltwater flanges, saltwater piping, seawater intakes, pipe fittings. Propeller sleeves and pump boilers and shafts. Moreover, they can also be used in heat exchangers, evaporator tubes, cooling plants, condenser components, and refrigerator parts.
70/30 Copper Nickel Seamless Fittings offer high ductility and low toughness. They are expensive due to the elements used in them for manufacturing. They are used in the marine environment since they do not corrode easily and can be used for a longer period of time. Copper Nickel Cu-Ni 70/30 (C71500) Welded Fittings can be hot or cold forged and can display thermal stability in a high temperature environment. They are manufactured as per international standards and retain the desired properties. Our products are well known for their durability and long service life along with an affordable price.
Table Of Content:
ASTM B466 UNS C71500 Elbow Dimensions
Normal Size Of Pipe | Outside Dai Of (D) | 90 degree (Long Radius) Center-to-End (A) | 45 degree (Long Radius) Center-to-End (B) | 90 degree (3D) Center-to-End (A) | 45 degree (3D) Center-to-End (B) |
1/2 | 21.3 | 38 | 16 | – | – |
3/4 | 26.7 | 38 | 19 | 57 | 24 |
1 | 33.4 | 38 | 22 | 76 | 31 |
1¼ | 42.2 | 48 | 25 | 95 | 39 |
1½ | 48.3 | 57 | 29 | 114 | 47 |
2 | 60.3 | 76 | 35 | 152 | 63 |
2½ | 73 | 95 | 44 | 190 | 79 |
3 | 88.9 | 114 | 51 | 229 | 95 |
3½ | 101.6 | 133 | 57 | 267 | 111 |
4 | 114.3 | 152 | 64 | 305 | 127 |
5 | 141.3 | 190 | 79 | 381 | 157 |
6 | 168.3 | 229 | 95 | 457 | 189 |
8 | 219.1 | 305 | 127 | 610 | 252 |
10 | 273 | 381 | 159 | 762 | 316 |
12 | 323.8 | 457 | 190 | 914 | 378 |
14 | 355.6 | 533 | 222 | 1067 | 441 |
16 | 406.4 | 610 | 254 | 1219 | 505 |
18 | 457 | 686 | 286 | 1372 | 568 |
20 | 508 | 762 | 318 | 1524 | 632 |
22 | 559 | 838 | 343 | 1676 | 694 |
24 | 610 | 914 | 381 | 1829 | 757 |
26 | 660 | 991 | 406 | 1981 | 821 |
28 | 711 | 1067 | 438 | 2134 | 883 |
30 | 762 | 1143 | 470 | 2286 | 964 |
32 | 813 | 1219 | 502 | 2438 | 1010 |
34 | 864 | 1295 | 533 | 2591 | 1073 |
36 | 914 | 1372 | 565 | 2743 | 1135 |
38 | 965 | 1448 | 600 | 2896 | 1200 |
40 | 1016 | 1524 | 632 | 3048 | 1264 |
42 | 1067 | 1600 | 660 | 3200 | 1326 |
44 | 1118 | 1676 | 695 | 3353 | 1389 |
46 | 1168 | 1753 | 727 | 3505 | 1453 |
48 | 1219 | 1829 | 759 | 3658 | 1516 |
Cupro Nickel 70/30 End Cap Dimensions
NPS Of Pipe Cap | O.D. (Outside Daimeter) Of D | Length Of (H) | Length Of (H1) |
1/2 | 21.3 | 25 | 25 |
3/4 | 26.7 | 25 | 25 |
1 | 33.4 | 38 | 38 |
1.1/4 | 42.2 | 38 | 38 |
1.1/2 | 48.3 | 38 | 38 |
2 | 60.3 | 38 | 44 |
2.1/2 | 73 | 38 | 51 |
3 | 88.9 | 51 | 64 |
3.1/2 | 101.6 | 64 | 76 |
4 | 114.3 | 64 | 76 |
5 | 141.3 | 76 | 89 |
6 | 168.3 | 89 | 102 |
8 | 219.1 | 102 | 127 |
10 | 273 | 127 | 152 |
12 | 323.8 | 152 | 178 |
14 | 355.6 | 165 | 191 |
16 | 406.4 | 178 | 203 |
18 | 457 | 203 | 229 |
20 | 508 | 229 | 254 |
22 | 559 | 254 | 254 |
24 | 610 | 267 | 305 |
26 | 660 | 267 | … |
28 | 711 | 267 | … |
30 | 762 | 267 | … |
32 | 813 | 267 | … |
34 | 864 | 237 | … |
36 | 914 | 267 | … |
38 | 965 | 305 | … |
40 | 1016 | 305 | … |
42 | 1067 | 305 | … |
44 | 1118 | 343 | … |
46 | 1168 | 343 | … |
48 | 1219 | 343 | … |
Test Certificates
Value Added Services
Cu-Ni 70/30 Reducer Dimensions
RCD Reiso Code | BIG Ø | SMALL Ø | Hight (H) MM | Theoretical Weight In KG (Kilogram) | ||||
---|---|---|---|---|---|---|---|---|
(DN) | (D) MM | Thickness Of (S) In MM. | (DN) | (D) MM | Thickness Of (S) MM | |||
27 21 | 3/4 | 26.9 | 2.3 | 1/2 | 21.3 | 2.0 | 38 | 0.08 |
33 21 | 1 | 33.7 | 2.6 | 1/2 | 21.3 | 2.0 | 50 | 0.09 |
33 27 | 3/4 | 26.9 | 2.3 | 0.09 | ||||
42 21 | 1"1/4 | 42.4 | 2.6 | 1/2 | 21.3 | 2.0 | 50 | 0.12 |
42 27 | 3/4 | 26.9 | 2.3 | 0.13 | ||||
42 33 | 1 | 33.7 | 2.6 | 0.14 | ||||
*48 21 | 1"1/2 | 48.3 | 2.6 | 1/2 | 21.3 | 2.0 | 64 | 0.18 |
48 27 | 3/4 | 26.9 | 2.3 | 0.19 | ||||
48 33 | 1 | 33.7 | 2.6 | 0.20 | ||||
48 42 | 1"1/4 | 42.4 | 2.6 | 0.20 | ||||
60 27 | 2 | 60.3 | 2.9 | 3/4 | 26.9 | 2.3 | 76 | 0.30 |
60 33 | 1 | 33.7 | 2.6 | 0.31 | ||||
60 42 | 1"1/4 | 42.4 | 2.6 | 0.32 | ||||
60 48 | 1"1/2 | 48.3 | 2.6 | 0.33 | ||||
76 33 | 2"1/2 | 76.1 | 2.9 | 1 | 33.7 | 2.6 | 90 | 0.40 |
76 42 | 1"1/4 | 42.4 | 2.6 | 0.47 | ||||
76 48 | 1"1/2 | 48.3 | 2.6 | 0.48 | ||||
76 60 | 2 | 60.3 | 2.6 | 0.49 | ||||
89 42 | 3 | 88.9 | 3.2 | 1"1/4 | 42.4 | 2.6 | 90 | 0.55 |
89 48 | 1"1/2 | 48.3 | 2.6 | 0.61 | ||||
89 60 | 2 | 60.3 | 2.9 | 0.62 | ||||
89 76 | 2"1/2 | 76.1 | 2.9 | 0.63 | ||||
114 48 | 4 | 114.3 | 3.6 | 1"1/2 | 48.3 | 2.6 | 100 | 0.85 |
114 60 | 2 | 60.3 | 2.9 | 0.98 | ||||
114 76 | 2"1/2 | 76.1 | 2.9 | 1.00 | ||||
114 89 | 3 | 88.9 | 3.2 | 1.02 | ||||
139 60 | 5 | 139.7 | 4.0 | 2 | 60.3 | 2.9 | 127 | 1.60 |
139 76 | 2"1/2 | 76.1 | 2.9 | 1.70 | ||||
139 89 | 3 | 88.9 | 3.2 | 1.74 | ||||
139 114 | 4 | 114.3 | 3.6 | 1.76 | ||||
*168 76 | 6 | 168.3 | 4.5 | 2"1/2 | 76.1 | 2.9 | 140 | 2.60 |
168 89 | 3 | 88.9 | 3.2 | 2.70 | ||||
168 114 | 4 | 114.3 | 3.6 | 2.82 | ||||
168 139 | 5 | 139.7 | 4.0 | 2.94 | ||||
219 114 | 8 | 219.1 | 6.3 | 4 | 114.3 | 3.6 | 152 | 5.03 |
219 139 | 5 | 139.7 | 4.0 | 5.12 | ||||
219 168 | 6 | 168.3 | 4.5 | 5.18 | ||||
*273 114 | 10 | 273.0 | 6.3 | 4 | 114.3 | 3.6 | 178 | 7.00 |
*273 139 | 5 | 139.7 | 4.0 | 7.20 | ||||
273 168 | 6 | 168.3 | 4.5 | 7.40 | ||||
273 219 | 8 | 219.1 | 6.3 | 7.55 | ||||
323 168 | 12 | 323.9 | 7.1 | 6 | 168.3 | 4.5 | 203 | 11.00 |
323 219 | 8 | 219.1 | 6.3 | 11.10 | ||||
323 273 | 10 | 273 | 6.3 | 11.20 |
How To Calculate ANSI/ ASME B16.9 Cupro Nickel 70/30 Equal Tee Center?
Copper Nickel 70/30 Chemical Composition
Copper Nickel 70/30 Pipe Fittings | Zn | Ni | Cu | Pb | Mn | Fe |
---|---|---|---|---|---|---|
(Min.) | - | 29.000 | 65.000 | - | - | 0.400 |
(Max.) | 1.000 | 33.000 | 0.500 | 1.000 | 1.000 |
Cu-Ni C71500 Fittings Price List
Type Of Fitting | Size | SCH | Material | Price In INR (India) Per Piece |
---|---|---|---|---|
Copper Nickel 70/30 End Cap | 1/2" | Schedule 40 | - | 267.00 |
End Cap | 3/4" | Schedule 40 | - | 457.00 |
- | 1" | Schedule 40 | - | 674.00 |
- | 1 1/4" | Schedule 40 | - | 874.00 |
- | 2" | Schedule 40 | Cupro Nickel | 986.00 |
Copper Nickel 70/30 Equal Tee | 3/4" | Schedule 40 | - | 289.00 |
- | 3/1" | Schedule 40 | - | 465.00 |
- | 2" | Schedule 40 | - | 587.00 |
- | 3" | Schedule 40 | - | 765.00 |
- | 4" | Schedule 40 | - | 1121.00 |
Copper Nickel 70/30 Elbow | 3/4" | SCH 40 | - | 298.00 |
90 Deg Elbow | 1" | SCH 40 | - | 474.00 |
- | 2" | SCH 40 | - | 673.00 |
- | 3" | SCH 40 | - | 788.00 |
- | 4" | SCH 40 | - | 999.00 |
- | 5" | SCH 40 | - | 1237.00 |
- | 6" | SCH 40 | - | 1587.00 |
Copper Nickel 70/30 Reducer | 3/4 X 1/2 | SCH 160 | - | 300.00 |
Concentric Reducer | 1 X 1/2" | SCH 160 | - | 378.00 |
- | 4 X 2" | SCH 160 | - | 489.00 |
- | 5 X 4" | SCH 40 | - | 1343.00 |
- | 6 X 4" | SCH 80 | - | 1764.00 |
One Of India’s Largest Manufacturer Copper Nickel 70/30 Pipe Fittings In India. For final CU-NI 70/30 Fittings Price List Please Call on +91-9987870874 or drop an Email to info@fastwell.in.
If You Searching A Supplier From These Places Check Our Supplies Below:
Copper Nickel 70/30 Pipe Fittings
South Africa, Saudi Arabia (KSA), Kuwait, Brazil
Cu-Ni 70/30 Buttweld Elbow
Turkey, Nigeria, Egypt, Australia, UK, Belgium
ASTM B466 UNS C71500 Long Stub End
Spain, Oman, Mexico, Hong Kong, Poland, Japan
Werkstoff Nr. 2.0882 Reducing Tee
Italy, Iran, Chile, Canada, Singapore, China
70/30 Copper Nickel Seamless Fitting
Malaysia, United Kingdom -UK, Europe, UAE
Cu-Ni 70/30 (C71500) Welded Fitting
Philippines, Dammam -KSA, Indonesia
Cu-Ni 70/30 Buttweld Fittings
Thailand, Qatar, France, Europe
Copper Nickel 70 / 30 Pipe Fitting
Bangladesh, Germany, USA, Finland
Copper Nickel 70/30 Fittings Equivalent
KS D5301 JIS H3300 |
C7150T |
ASTM B111 | C71500 |
ASTM B466 | C71500 |
BS2871 {PART2} | CN107 |
AS1752 | C71500 |
DIN17664 | CuNi30Mn1FE |
DIN 86019 WL2.1972 | |
EEMUA 144 | |
MIL-T-16420K | 771506 |
EN12449 | CW354H |
How To Make Copper Nickel 70/30 Concentric Reducer From Pipe?
Copper Nickel 70/30 Pipe Fittings Elongation
Elongation(% in 50mm) | 45.00 |
---|
Cu-Ni 70/30(C71500) Tee Dimension
NPS Of Equal Tee | Outside Daimeter (O.D.) at bevel | Center-to-End | |
---|---|---|---|
(C) Run | (M) Outlet | ||
1/2" | 21.3 | 25 | 25 |
3/4" | 26.7 | 29 | 29 |
1" | 33.4 | 38 | 38 |
1 1/4" | 42.2 | 48 | 48 |
1 1/2" | 48.3 | 57 | 57 |
2" | 60.3 | 64 | 64 |
2 1/2" | 73.0 | 76 | 76 |
3" | 88.9 | 86 | 86 |
3 1/2" | 101.6 | 95 | 95 |
4" | 114.3 | 105 | 105 |
5" | 141.3 | 124 | 124 |
6" | 168.3 | 143 | 143 |
8" | 219.1 | 178 | 178 |
10" | 273.0 | 216 | 216 |
12" | 323.8 | 254 | 254 |
14" | 355.6 | 279 | 279 |
16" | 406.4 | 305 | 305 |
18" | 457.0 | 343 | 343 |
20" | 508.0 | 381 | 381 |
22" | 559.0 | 419 | 419 |
24" | 610.0 | 432 | 432 |
Schedule 40 Copper Nickel 70/30 Buttweld Fittings Yield Strength
Yield Strength 0.2% Proof (MPa) | |
---|---|
MINIMUM | MAXIMUM |
88 | 483 |
Cupro Nickel 70/30 Fittings Melting Point
Melting Point | 2260 F |
---|
Copper Nickel Cu-ni 70/30(C71500) Pipe Fittings Pressure Rating Formula
Pressure ratings (psig) | |||||
---|---|---|---|---|---|
Pipe Fitting Temperature Ratings | Type Of Pressure Class | ||||
150 LBS | 300 LBS | ||||
1/4 - 1 Inches | 1 1/4 - 2 Inches | 2 1/2 - 3 Inches | |||
(oF) | (oC) | ||||
-20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
200 | 93 | 265 | 1785 | 1350 | 910 |
250 | 121 | 225 | 1575 | 1200 | 825 |
300 | 149 | 185 | 1360 | 1050 | 735 |
350 | 177 | 150 | 1150 | 900 | 650 |
400 | 204 | - | 935 | 750 | 560 |
450 | 232 | - | 725 | 600 | 475 |
500 | 260 | - | 510 | 450 | 385 |
550 | 288 | - | 300 | 300 | 300 |
Copper Nickel 70:30 Pipe Fittings Size Chart
O.D. (Outside Daimeter) And I.D. (Inside Daimeter) | Equivalent List | Diameter Of Nominal Pipe | Threads Size In Inches |
5/16 | 0.313 | 1/16 | 27 |
13/32 | 0.405 | 1/8 | 27 |
35/64 | 0.540 | 1/4 | 18 |
43/64 | 0.675 | 3/8 | 18 |
27/32 | 0.840 | 1/2 | 14 |
1-3/64 | 1.050 | 3/4 | 14 |
1-5/16 | 1.315 | 1 | 11-1/2 |
1-21/32 | 1.660 | 1-1/4 | 11-1/2 |
1-29/32 | 1.900 | 1-1/2 | 11-1/2 |
2-3/8 | 2.375 | 2 | 11-1/2 |
2-7/8 | 2.875 | 2-1/2 | 8 |
3-1/2 | 3.500 | 3 | 8 |
4 | 4.000 | 3-1/2 | 8 |
4-1/2 | 4.500 | 4 | 8 |
Cupro Nickel 70/30 Forged Fittings Density
Density | 0.323 lb/in3 at 68 F |
---|
70/30 Copper Nickel Fittings Mechanical Chart
Yield Strength
0.2% Proof (MPa) |
Tensile strength
(MPa) |
Elongation
(% in 50mm) |
Hardness
(HRB) |
|
---|---|---|---|---|
(Max.) | 483 | 517 | 51 | |
(Min.) | 88 | 372 | 45.00 |
Cu-ni 70/30 Fittings Specification Chart
Specification Format | Copper Nickel 70/30 Pipe Fittings |
---|---|
Types | Elbow Fitting/ Tee Fitting/ Reducer Fitting/ Stub End Fitting/ Pipe Bend Fitting/ End Cap Fitting |
Standard And Dimensions | EN Fitting/ JIS Fitting/ ASME Fitting/ANSI B16.11 Fitting/ DIN Fitting/ ASME B16.28 Fitting/ MSS-SP-43 Fitting/ ASME/ANSI B16.9 Fitting |
Connection | Forging/ Clamp End / End Bell/ Threaded/ Weld |
Methods | (1) Welded, (2) ButtWeld, (3) Seamless |
Pressure | Class 150/ Class 300/ Class 600 |
Size Range | 1/2" To 24" Inch |
Thickness | SCH 10 To STD |
2 Inch Copper Nickel 70/30 Welded Fittings Tolerance Chart
Tolerance Of Copper Nickel 70/30 Pipe Fittings | |||||||
All Type Of Buttweld Fittings | 45 deg & 90 deg elbows | 180 Degree Returns | |||||
Normal Size Of Pipe (NPS) | Outside Daimeter (O.D.) at Bevel | I.D. (Inside Daimeter) at End | Thickness Of Wall (WT) t / t1 | Center to End Daimeter A-B-C-M | Center to Center Daimeter (O) | Back to Face Daimeter (K) | Align- ment of Ends (U) |
1/2 a 2 1/2 | 1 | 0,8 | Not | 2 | 7 | 7 | 1 |
3 a 3 1/2 | 1 | 1,6 | less | 2 | 7 | 7 | 1 |
4 | +2 -1 | 1,6 | than | 2 | 7 | 7 | 1 |
5 a 6 | +3 -1 | 1,6 | 87,50% | 2 | 7 | 7 | 1 |
8 | 2 | 1,6 | of nominal | 2 | 7 | 7 | 1 |
10 | +4 -3 | 3,2 | tickness | 2 | 7 | 7 | 2 |
12 a 18 | +4 -3 | 3,2 | 3 | 10 | 7 | 2 | |
20 a 24 | +6 -5 | 4,8 | 3 | 10 | 7 | 2 | |
26 a 30 | +7 -5 | 4,8 | 3 | - | - | - | - |
32 a 48 | +7 -5 | 4,8 | 5 | - | - | - | - |
Types Of Copper Nickel 70/30 Pipe Fittings
Cupro Nickel 70/30 End Cap
ASTM B466 UNS C71500 Stub End
Cupro Nickel 70/30 Reducer
Cu-Ni 70/30 Nipple
Cu-Ni 70/30(C71500) Long Radius Elbow
Copper Nickel 70/30 UNS C71500 Short Radius Elbow
Cu-Ni C71500 90 Deg Elbow
Copper Nickel 70/30 Elbow
ASTM B466 Copper Nickel 70/30 180 Deg Elbow
70/30 Cu-Ni 90 Degree Elbow
70/30 Copper Nickel 45 Degree Elbow
Werkstoff Nr. 2.0882 45 Deg Elbow
70/30 Barred Tee
Cupro Nickel 70/30 Reducing Tee
Cu-Ni 70/30 (C71500) Tee
Cu-Ni 70/30 Equal Tee
Application Of Copper Nickel 70/30 UNS C71500 Fittings
Copper Nickel 70-30 Fittings Dimensions
Normal Pipe Size For (NPS) | Outside Daimeter For (O.D.) | Buttweld 90 Deg Elbow | Buttweld 45 Deg Elbow | Buttweld Return 180 Deg Elbow | ||||
---|---|---|---|---|---|---|---|---|
(In Inches) | Buttweld LR Elbow | Buttweld SR Elbow | Buttweld LR Elbow | Buttweld LR Elbow | ||||
(MM/ millimeter) | (Inches/ inch.) | Center to Face (In Inch) | Center to Face (In Inch) | Center to Face (In Inch) | Radius (In Inch) | Center to Center (In Inch) | Back to face (In Inch) | |
1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
Normal Pipe Size For (NPS) | Outside Daimeter For (O.D.) | ASME/ANSI B16.9 BW End Cap | ASME/ANSI B16.9 BW Straight Tee | ASME/ANSI B16.9 BW Straight Cross | ASME B16.9 BW Stub Ends | |||
---|---|---|---|---|---|---|---|---|
(Inches/ inch.) | (MM/ millimeter) | (Inch.) | Length (Inch.) | Center to End (Inch.) | Center to End (Inch.) | Lap Diameter (Inch.) | Long Length (Inch.) | Short Length (Inch.) |
1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Documentation
List Of Machineries
Cu-Ni 70/30 (C71500) Stub End Dimensions
Normal Pipe Size For (NPS) | O.D. For (Outside Daimeter) of barrel | Length Of (F) | Radius Of(R) | Diameter Of (G) | ||
---|---|---|---|---|---|---|
(Min.) | (Max.) | ASME B16.9 Long Pattern | ASME B16.9 Short Pattern | |||
1/2″ | 20.5 | 22.8 | 76 | 51 | 3 | 35 |
3/4″ | 25.9 | 28.1 | 76 | 51 | 3 | 43 |
1″ | 32.6 | 35.0 | 102 | 51 | 3 | 51 |
1 1/4″ | 41.4 | 43.6 | 102 | 51 | 5 | 64 |
1 1/2″ | 47.5 | 49.9 | 102 | 51 | 6 | 74 |
2″ | 59.5 | 62.4 | 152 | 64 | 8 | 92 |
2 1/2″ | 72.2 | 75.3 | 152 | 64 | 8 | 105 |
3″ | 88.1 | 91.3 | 152 | 64 | 10 | 127 |
3 1/2″ | 100.8 | 104.0 | 152 | 76 | 10 | 140 |
4″ | 113.5 | 116.7 | 152 | 76 | 11 | 157 |
5″ | 140.5 | 144.3 | 203 | 76 | 11 | 186 |
6″ | 167.5 | 171.3 | 203 | 89 | 13 | 216 |
8″ | 218.3 | 222.1 | 203 | 102 | 13 | 270 |
10″ | 272.3 | 277.2 | 254 | 127 | 13 | 324 |
12″ | 323.1 | 328.0 | 254 | 152 | 13 | 381 |
14″ | 354.8 | 359.9 | 305 | 152 | 13 | 413 |
16″ | 405.6 | 411.0 | 305 | 152 | 13 | 470 |
18″ | 456.0 | 462.0 | 305 | 152 | 13 | 533 |
20″ | 507.0 | 514.0 | 305 | 152 | 13 | 584 |
22″ | 558.0 | 565.0 | 305 | 152 | 13 | 641 |
24″ | 609.0 | 616.0 | 305 | 152 | 13 | 692 |
Werkstoff Nr. 2.0882 Fittings Tensile Strength
Tensile strength (MPa) | |
---|---|
MINIMUM | MAXIMUM |
372 | 517 |
Cupro Nickel 70/30 Fittings Schedule Chart
Normal Pipe Size For (NPS) For ANSI/ASME B16.9 | 10S Schedule | 40S Schedule | 80S Schedule | ||||||
Buttweld 90 Degree Elbow | Buttweld 45 Degree Elbow | B16.9 Buttweld Equal Tee | Buttweld 90 Deg Elbows | Buttweld 45 Deg Elbows | B16.9 Buttweld Equal Tee | Buttweld 90 Degree Elbow | Buttweld 45 Degree Elbow | ASME B16.9 Buttweld Equal Tee | |
8 | 0.02 | 0.01 | 0.03 | 0.03 | 0.02 | 0.06 | 0.04 | 0.03 | 0.07 |
10 | 0.03 | 0.02 | 0.05 | 0.03 | 0.02 | 0.03 | 0.06 | 0.04 | 0.09 |
15 | 0.06 | 0.03 | 0.09 | 0.08 | 0.04 | 0.10 | 0.10 | 0.05 | 0.14 |
20 | 0.07 | 0.03 | 0.13 | 0.08 | 0.04 | 0.17 | 0.11 | 0.05 | 0.20 |
25 | 0.14 | 0.08 | 0.28 | 0.15 | 0.11 | 0.29 | 0.22 | 0.14 | 0.38 |
32 | 0.23 | 0.11 | 0.49 | 0.26 | 0.17 | 0.59 | 0.40 | 0.23 | 0.68 |
40 | 0.30 | 0.17 | 0.68 | 0.40 | 0.23 | 0.86 | 0.51 | 0.29 | 1.02 |
50 | 0.50 | 0.25 | 0.85 | 0.70 | 0.4 | 1.28 | 0.91 | 0.59 | 1.59 |
65 | 0.85 | 0.48 | 1.41 | 1.40 | 0.77 | 2.19 | 1.81 | 0.99 | 3.13 |
80 | 1.25 | 0.63 | 1.77 | 2.20 | 1.08 | 3.31 | 2.97 | 1.50 | 4.45 |
90 | 1.70 | 0.75 | 2.67 | 2.83 | 1.42 | 4.08 | 4.00 | 2.00 | 5.44 |
100 | 2.10 | 1.08 | 3.46 | 4.47 | 2.09 | 5.27 | 6.18 | 2.81 | 7.71 |
150 | 5.45 | 2.72 | 8.07 | 10.89 | 5.44 | 10.99 | 16.32 | 8.16 | 13.61 |
200 | 10.20 | 5.33 | 15.65 | 21.54 | 10.77 | 20.91 | 33.11 | 16.56 | 28.12 |
250 | 18.15 | 9.75 | 26.46 | 38.56 | 19.27 | 35.38 | 51.71 | 25.86 | 49.90 |
300 | 25.80 | 13.62 | 39.46 | 59.42 | 29.71 | 62.14 | 79.38 | 39.69 | 83.91 |
Normal Pipe Size For (NPS) For ANSI/ ASME B16.9 | 10S Schedule | 40S Schedule | 80S Schedule | ||||||
Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | |
40x.25 | 0.19 | 0.19 | 0.60 | 0.26 | 0.26 | 0.76 | 0.34 | 0.34 | 0.90 |
50x25 | 0.28 | 0.28 | 0.73 | 0.40 | 0.40 | 1.10 | 0.54 | 0.54 | 1.37 |
50x40 | 0.31 | 0.31 | 0.76 | 0.45 | 0.45 | 1.15 | 0.59 | 0.59 | 1.43 |
80x.50 | 0.55 | 0.55 | 1.56 | 1.00 | 1.00 | 2.91 | 1.79 | 1.79 | 3.91 |
100x50 | 0.78 | 0.78 | 2.94 | 1.50 | 1.50 | 4.48 | 1.95 | 1.95 | 6.55 |
100x80 | 0.87 | 0.87 | 3.04 | 1.74 | 1.74 | 4.64 | 2.33 | 2.33 | 6.79 |
150x80 | 1.82 | 1.82 | 6.86 | 3.95 | 3.95 | 9.68 | 5.51 | 5.51 | 11.57 |
150x100 | 1.96 | 1.96 | 7.10 | 4.07 | 4.07 | 11.94 | 5.96 | 5.96 | 11.97 |
200x100 | 3.01 | 3.01 | 13.46 | 6.55 | 6.55 | 17.98 | 9.23 | 9.23 | 24.18 |
200x150 | 3.19 | 3.19 | 14.08 | 6.74 | 6.74 | 18.82 | 10.12 | 10.12 | 25.31 |
Material
Our Products
Get In Touch
+91-9987870874
info@fastwell.in
Shop No. 17/B1, Ground Floor Abbas Bldg. Wing A, Jalbhai Street, Near Cama Baug Khetwadi, Grant Road (E) Mumbai – 400004. India