Monel is an alloy that is a combination of copper and nickel. These 2 elements offer high strength and high performance to any product. One such product is the Monel 400 Pipe Fittings. They are said to be best suited for high temperature and high pressure applications. It offers high tensile strength and corrosion resistance at most the temperatures. ASTM B366 Monel 400 Fittings manufacturer In India recommends these fittings due to zero leakage and the tight seal that it offers. These Alloy 400 Buttweld Elbows have hot and cold workability and are said to be non-magnetic. They also prevent high temperature oxidation.
ASME B366 UNS N04400 Long Stub End also offers good flexibility, thermal conductivity, and hardness. They are cost efficient and can resist alkalis, water, and organic substances like salt. Nickel Alloy 400 Reducing Tee also provides resistance to hydrochloric and hydrofluoric acid and is easy to assemble and disassemble. These fittings are easy to clean and have less maintenance and repair costs. Werkstoff Nr. 2.4360 Concentric Reducer is also used in applications that work at lower pressure and offer a tight seal. They are ductile and malleable when compared to other grades.
Monel 400 Forged Fittings also offer resistance to crevice corrosion and pitting and are relied upon for chemical and hydrocarbon processing. They are used in seawater purification and engineering. B366 Monel N04400 End Cap is also used in power generation, heat exchangers, condensers, and so on. We have been manufacturing these fittings and supplying them to various industries for ages now. We use the best quality raw material for manufacturing Nickel Alloy 400 Seamless Fittings. This has gained the trust of our customers when it comes to Monel Pipe Fittings being supplied to them. They rest assured about the quality.
STANDARD | UNS | BS | GOST | WERKSTOFF NR. | AFNOR | EN | JIS |
Monel 400 Pipe Fittings | N04400 | NA 13 | МНЖМц 28-2,5-1,5 | 2.4360 | NU-30M | NiCu30Fe | NW 4400 |
Iron | ≤2.50 |
Sulfur | ≤0.024 |
Nickel | ≥63.0 |
Carbon | ≤0.30 |
Copper | 28.0-34.0 |
Manganese | ≤2.0 |
Silicon | ≤0.50 |
Tensile Strength, (minimum) | Yield Strength, (minimum) | Elongation, (minimum) | Hardness | ||
---|---|---|---|---|---|
Mpa | ksi | Mpa | ksi | % | HB |
550 | 80 | 240 | 35 | 40 | 110-150 |
Density | Melting Range | Curie Temperature | Electrisity Resistivity | |||
---|---|---|---|---|---|---|
g/cm3 | lb/in3 | °F | °C | °F | °C | µΩ·m |
8.80 | 0.318 | 2370-2460 | 1300-1350 | 70-120 | 21-49 | 547 |
Melting Range | |
---|---|
°C | °F |
1300-1350 | 2370-2460 |
Tensile Strength | |
---|---|
Mpa | 550 |
ksi | 80 |
Density | |
---|---|
g/cm3 | lb/in3 |
8.80 | 0.318 |
Yield Strength | |
---|---|
Mpa | 240 |
ksi | 35 |
°F | °C |
---|---|
70-120 | 21-49 |
Electrisity Resistivity | |
---|---|
µΩ·m | 547 |
Monel 400 Pipe Fittings
South Africa, Kuwait, Brazil, Saudi Arabia (KSA)
Monel 400 Forged Fittings
Egypt, Turkey, Australia, Nigeria, UK, Belgium
Monel Pipe Fittings
Oman, Mexico, Hong Kong, Spain, Poland, Japan
Monel Fittings
Canada, Chile, Italy, Singapore, Iran, China
Monel 400 Tube Fitting
United Kingdom -UK, Malaysia, Europe, UAE
Monel Buttweld Fittings
Dammam -KSA, Philippines, Indonesia
ASTM B366 UNS N04400 Monel Elbow
Qatar, France, Thailand, Europe
Nickel Alloy 400 Tee
Germany, USA, Bangladesh, Finland
Hardness | HB | 110-150 |
---|
Elongation, minimum | % | 40 |
---|
Type Of Fitting | Size | SCH | Material | Price In INR (India) Per Piece |
---|---|---|---|---|
Monel 400 Elbow | 3/4" | SCH 40 | Monel 400 | 433.00 |
90 Deg Elbow | 1" | SCH 40 | - | 600.00 |
- | 2" | SCH 40 | - | 798.00 |
- | 3" | SCH 40 | - | 999.00 |
- | 4" | SCH 40 | - | 1032.00 |
- | 5" | SCH 40 | - | 1200.00 |
90 Deg Elbow | 6" | SCH 40 | - | 1350.00 |
Monel 400 Tee | 1/2" | Schedule 40 | Monel 400 | 600.00 |
- | 3/4" | Schedule 40 | - | 712.00 |
- | 3/1" | Schedule 40 | - | 923.00 |
- | 2" | Schedule 40 | - | 1100.00 |
- | 3" | Schedule 40 | - | 1345.00 |
Equal Tee | 4" | Schedule 40 | - | 1400.00 |
Monel 400 Cap | 1/2" | Schedule 40 | - | 650.00 |
End Cap | 3/4" | Schedule 40 | - | 754.00 |
- | 1" | Schedule 40 | - | 800.00 |
- | 1 1/4" | Schedule 40 | - | 937.00 |
End Cap | 2" | Schedule 40 | - | 1264.00 |
Monel 400 Reducer | 3/4 X 1/2 | SCH 160 | Monel 400 | 634.00 |
Concentric Reducer | 1 X 1/2" | SCH 160 | - | 900.00 |
- | 4 X 2" | SCH 160 | - | 1182.00 |
- | 5 X 4" | SCH 40 | - | 1287.00 |
Concentric Reducer | 6 X 4" | SCH 80 | Monel 400 | 1378.00 |
We are one of top 5 Monel 400 Fittings Manufacturer In India. For final Monel Pipe Fittings Price List Please Call on +91-9987870874 or drop an Email to info@fastwell.in.
Normal Pipe Size For (NPS) | Outside Daimeter For (O.D.) | Buttweld 90 Deg Elbow | Buttweld 45 Deg Elbow | Buttweld Return 180 Deg Elbow | ||||
---|---|---|---|---|---|---|---|---|
(In Inches) | Buttweld LR Elbow | Buttweld SR Elbow | Buttweld LR Elbow | Buttweld LR Elbow | ||||
(MM/ millimeter) | (Inches/ inch.) | Center to Face (In Inch) | Center to Face (In Inch) | Center to Face (In Inch) | Radius (In Inch) | Center to Center (In Inch) | Back to face (In Inch) | |
1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
Normal Pipe Size For (NPS) | Outside Daimeter For (O.D.) | ASME/ANSI B16.9 BW End Cap | ASME/ANSI B16.9 BW Straight Tee | ASME/ANSI B16.9 BW Straight Cross | ASME B16.9 BW Stub Ends | |||
---|---|---|---|---|---|---|---|---|
(Inches/ inch.) | (MM/ millimeter) | (Inch.) | Length (Inch.) | Center to End (Inch.) | Center to End (Inch.) | Lap Diameter (Inch.) | Long Length (Inch.) | Short Length (Inch.) |
1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
NPS Of Equal Tee | Outside Daimeter (O.D.) at bevel | Center-to-End | |
---|---|---|---|
(C) Run | (M) Outlet | ||
1/2" | 21.3 | 25 | 25 |
3/4" | 26.7 | 29 | 29 |
1" | 33.4 | 38 | 38 |
1 1/4" | 42.2 | 48 | 48 |
1 1/2" | 48.3 | 57 | 57 |
2" | 60.3 | 64 | 64 |
2 1/2" | 73.0 | 76 | 76 |
3" | 88.9 | 86 | 86 |
3 1/2" | 101.6 | 95 | 95 |
4" | 114.3 | 105 | 105 |
5" | 141.3 | 124 | 124 |
6" | 168.3 | 143 | 143 |
8" | 219.1 | 178 | 178 |
10" | 273.0 | 216 | 216 |
12" | 323.8 | 254 | 254 |
14" | 355.6 | 279 | 279 |
16" | 406.4 | 305 | 305 |
18" | 457.0 | 343 | 343 |
20" | 508.0 | 381 | 381 |
22" | 559.0 | 419 | 419 |
24" | 610.0 | 432 | 432 |
Normal Size Of Pipe | Outside Dai Of (D) | 90 degree (Long Radius) Center-to-End (A) | 45 degree (Long Radius) Center-to-End (B) | 90 degree (3D) Center-to-End (A) | 45 degree (3D) Center-to-End (B) |
1/2 | 21.3 | 38 | 16 | – | – |
3/4 | 26.7 | 38 | 19 | 57 | 24 |
1 | 33.4 | 38 | 22 | 76 | 31 |
1¼ | 42.2 | 48 | 25 | 95 | 39 |
1½ | 48.3 | 57 | 29 | 114 | 47 |
2 | 60.3 | 76 | 35 | 152 | 63 |
2½ | 73 | 95 | 44 | 190 | 79 |
3 | 88.9 | 114 | 51 | 229 | 95 |
3½ | 101.6 | 133 | 57 | 267 | 111 |
4 | 114.3 | 152 | 64 | 305 | 127 |
5 | 141.3 | 190 | 79 | 381 | 157 |
6 | 168.3 | 229 | 95 | 457 | 189 |
8 | 219.1 | 305 | 127 | 610 | 252 |
10 | 273 | 381 | 159 | 762 | 316 |
12 | 323.8 | 457 | 190 | 914 | 378 |
14 | 355.6 | 533 | 222 | 1067 | 441 |
16 | 406.4 | 610 | 254 | 1219 | 505 |
18 | 457 | 686 | 286 | 1372 | 568 |
20 | 508 | 762 | 318 | 1524 | 632 |
22 | 559 | 838 | 343 | 1676 | 694 |
24 | 610 | 914 | 381 | 1829 | 757 |
26 | 660 | 991 | 406 | 1981 | 821 |
28 | 711 | 1067 | 438 | 2134 | 883 |
30 | 762 | 1143 | 470 | 2286 | 964 |
32 | 813 | 1219 | 502 | 2438 | 1010 |
34 | 864 | 1295 | 533 | 2591 | 1073 |
36 | 914 | 1372 | 565 | 2743 | 1135 |
38 | 965 | 1448 | 600 | 2896 | 1200 |
40 | 1016 | 1524 | 632 | 3048 | 1264 |
42 | 1067 | 1600 | 660 | 3200 | 1326 |
44 | 1118 | 1676 | 695 | 3353 | 1389 |
46 | 1168 | 1753 | 727 | 3505 | 1453 |
48 | 1219 | 1829 | 759 | 3658 | 1516 |
Specification Checklist | Monel 400 Pipe Fittings |
---|---|
Chemical Composition | Manganese (≤2.0), Silicon (≤0.50), Carbon (≤0.30), Nickel (≥63.0) Etc. |
UNS Number | UNS N04400 |
Werkstoff Nummer | Werkstoff Nr. 2.4360 |
Standard And Dimensions | BS/ JIS/ DIN/ ASME/ANSI B16.9/ ISO/ EN/ MSS-SP-43/ ASME/ANSI B16.11/ ASME B16.28/ NPT |
One Of The Oldest Manufacturer Types Of Monel Fittings | Tee/ Elbow/ End Cap/ Reducer/ Pipe Bend/ Stub End |
Pressure Test | 150LB/ 300LB/ 600LB |
Manufacturers Schedule | Schedule 40 To Schedule 80 |
Size | 1/2" To 24" |
RCD Reiso Code | BIG Ø | SMALL Ø | Hight (H) MM | Theoretical Weight In KG (Kilogram) | ||||
---|---|---|---|---|---|---|---|---|
(DN) | (D) MM | Thickness Of (S) In MM. | (DN) | (D) MM | Thickness Of (S) MM | |||
27 21 | 3/4 | 26.9 | 2.3 | 1/2 | 21.3 | 2.0 | 38 | 0.08 |
33 21 | 1 | 33.7 | 2.6 | 1/2 | 21.3 | 2.0 | 50 | 0.09 |
33 27 | 3/4 | 26.9 | 2.3 | 0.09 | ||||
42 21 | 1"1/4 | 42.4 | 2.6 | 1/2 | 21.3 | 2.0 | 50 | 0.12 |
42 27 | 3/4 | 26.9 | 2.3 | 0.13 | ||||
42 33 | 1 | 33.7 | 2.6 | 0.14 | ||||
*48 21 | 1"1/2 | 48.3 | 2.6 | 1/2 | 21.3 | 2.0 | 64 | 0.18 |
48 27 | 3/4 | 26.9 | 2.3 | 0.19 | ||||
48 33 | 1 | 33.7 | 2.6 | 0.20 | ||||
48 42 | 1"1/4 | 42.4 | 2.6 | 0.20 | ||||
60 27 | 2 | 60.3 | 2.9 | 3/4 | 26.9 | 2.3 | 76 | 0.30 |
60 33 | 1 | 33.7 | 2.6 | 0.31 | ||||
60 42 | 1"1/4 | 42.4 | 2.6 | 0.32 | ||||
60 48 | 1"1/2 | 48.3 | 2.6 | 0.33 | ||||
76 33 | 2"1/2 | 76.1 | 2.9 | 1 | 33.7 | 2.6 | 90 | 0.40 |
76 42 | 1"1/4 | 42.4 | 2.6 | 0.47 | ||||
76 48 | 1"1/2 | 48.3 | 2.6 | 0.48 | ||||
76 60 | 2 | 60.3 | 2.6 | 0.49 | ||||
89 42 | 3 | 88.9 | 3.2 | 1"1/4 | 42.4 | 2.6 | 90 | 0.55 |
89 48 | 1"1/2 | 48.3 | 2.6 | 0.61 | ||||
89 60 | 2 | 60.3 | 2.9 | 0.62 | ||||
89 76 | 2"1/2 | 76.1 | 2.9 | 0.63 | ||||
114 48 | 4 | 114.3 | 3.6 | 1"1/2 | 48.3 | 2.6 | 100 | 0.85 |
114 60 | 2 | 60.3 | 2.9 | 0.98 | ||||
114 76 | 2"1/2 | 76.1 | 2.9 | 1.00 | ||||
114 89 | 3 | 88.9 | 3.2 | 1.02 | ||||
139 60 | 5 | 139.7 | 4.0 | 2 | 60.3 | 2.9 | 127 | 1.60 |
139 76 | 2"1/2 | 76.1 | 2.9 | 1.70 | ||||
139 89 | 3 | 88.9 | 3.2 | 1.74 | ||||
139 114 | 4 | 114.3 | 3.6 | 1.76 | ||||
*168 76 | 6 | 168.3 | 4.5 | 2"1/2 | 76.1 | 2.9 | 140 | 2.60 |
168 89 | 3 | 88.9 | 3.2 | 2.70 | ||||
168 114 | 4 | 114.3 | 3.6 | 2.82 | ||||
168 139 | 5 | 139.7 | 4.0 | 2.94 | ||||
219 114 | 8 | 219.1 | 6.3 | 4 | 114.3 | 3.6 | 152 | 5.03 |
219 139 | 5 | 139.7 | 4.0 | 5.12 | ||||
219 168 | 6 | 168.3 | 4.5 | 5.18 | ||||
*273 114 | 10 | 273.0 | 6.3 | 4 | 114.3 | 3.6 | 178 | 7.00 |
*273 139 | 5 | 139.7 | 4.0 | 7.20 | ||||
273 168 | 6 | 168.3 | 4.5 | 7.40 | ||||
273 219 | 8 | 219.1 | 6.3 | 7.55 | ||||
323 168 | 12 | 323.9 | 7.1 | 6 | 168.3 | 4.5 | 203 | 11.00 |
323 219 | 8 | 219.1 | 6.3 | 11.10 | ||||
323 273 | 10 | 273 | 6.3 | 11.20 |
Nickel Alloy 400 Bushing
Monel 400 Plug
Monel Steel Alloy Swage Nipple
Nickel Monel K500 Union
High Temperature Monel Coupling
Monel Alloy 400 Pipe Nipples
Tolerance Of Monel 400 Pipe Fittings | |||||||
All Type Of Buttweld Fitting | 45 deg & 90 deg elbows | 180 Degree Returns | |||||
Normal Size Of Pipe (NPS) | Outside Daimeter (O.D.) at Bevel | I.D. (Inside Daimeter) at End | Thickness Of Wall (WT) t / t1 | Center to End Daimeter A-B-C-M | Center to Center Daimeter (O) | Back to Face Daimeter (K) | Align- ment of Ends (U) |
1/2 a 2 1/2 | 1 | 0,8 | Not | 2 | 7 | 7 | 1 |
3 a 3 1/2 | 1 | 1,6 | less | 2 | 7 | 7 | 1 |
4 | +2 -1 | 1,6 | than | 2 | 7 | 7 | 1 |
5 a 6 | +3 -1 | 1,6 | 87,50% | 2 | 7 | 7 | 1 |
8 | 2 | 1,6 | of nominal | 2 | 7 | 7 | 1 |
10 | +4 -3 | 3,2 | tickness | 2 | 7 | 7 | 2 |
12 a 18 | +4 -3 | 3,2 | 3 | 10 | 7 | 2 | |
20 a 24 | +6 -5 | 4,8 | 3 | 10 | 7 | 2 | |
26 a 30 | +7 -5 | 4,8 | 3 | - | - | - | - |
32 a 48 | +7 -5 | 4,8 | 5 | - | - | - | - |
Nickel 400 Monel Elbow
Nickel Alloy K500 Tee
UNS N04400 Stub End
Werkstoff Nr.2.4360 Reducer
Monel Steel End Cap
ASTM B366 N04400 Pipe Bend
Monel Alloy Reducing Tee
Nickel Monel 90 Degree Elbow
Monel Alloy K500 Eccentric Reducer
Monel 400 Long Radius Elbow
UNS N04400 Monel Equal Tee
Nickel Alloy Monel Concentric Reducer
Normal Pipe Size For (NPS) | O.D. For (Outside Daimeter) of barrel | Length Of (F) | Radius Of(R) | Diameter Of (G) | ||
---|---|---|---|---|---|---|
(Min.) | (Max.) | ASME B16.9 Long Pattern | ASME B16.9 Short Pattern | |||
1/2″ | 20.5 | 22.8 | 76 | 51 | 3 | 35 |
3/4″ | 25.9 | 28.1 | 76 | 51 | 3 | 43 |
1″ | 32.6 | 35.0 | 102 | 51 | 3 | 51 |
1 1/4″ | 41.4 | 43.6 | 102 | 51 | 5 | 64 |
1 1/2″ | 47.5 | 49.9 | 102 | 51 | 6 | 74 |
2″ | 59.5 | 62.4 | 152 | 64 | 8 | 92 |
2 1/2″ | 72.2 | 75.3 | 152 | 64 | 8 | 105 |
3″ | 88.1 | 91.3 | 152 | 64 | 10 | 127 |
3 1/2″ | 100.8 | 104.0 | 152 | 76 | 10 | 140 |
4″ | 113.5 | 116.7 | 152 | 76 | 11 | 157 |
5″ | 140.5 | 144.3 | 203 | 76 | 11 | 186 |
6″ | 167.5 | 171.3 | 203 | 89 | 13 | 216 |
8″ | 218.3 | 222.1 | 203 | 102 | 13 | 270 |
10″ | 272.3 | 277.2 | 254 | 127 | 13 | 324 |
12″ | 323.1 | 328.0 | 254 | 152 | 13 | 381 |
14″ | 354.8 | 359.9 | 305 | 152 | 13 | 413 |
16″ | 405.6 | 411.0 | 305 | 152 | 13 | 470 |
18″ | 456.0 | 462.0 | 305 | 152 | 13 | 533 |
20″ | 507.0 | 514.0 | 305 | 152 | 13 | 584 |
22″ | 558.0 | 565.0 | 305 | 152 | 13 | 641 |
24″ | 609.0 | 616.0 | 305 | 152 | 13 | 692 |
Size | NPS | Daimeter Of Socket Weld Bore (B) | Bore Diameter of Socket Weld Fitting(2) D | Socket Wall (Thickness1) C | Body Thickness G | Depth of Socket Weld Fitting (Minimum) (J) | |||||
---|---|---|---|---|---|---|---|---|---|---|---|
Class Fitting Designation | Class Fitting Designation | ||||||||||
Designation | Class 3000# | Class 6000# | Class 3000# | Class 6000# | |||||||
Class 3000 | Class 6000 | Available | (Min.) | Available | (Min.) | (Min.) | (Min.) | ||||
6 | 1/8 | 11.2 10.8 | 7.6 6.1 | 7.6 6.1 | 3.18 | 3.18 | 3.96 | 3.43 | 2.41 | 3.15 | 9.5 |
8 | 1/4 | 14.6 14.2 | 10.0 8.5 | 10.0 8.5 | 3.78 | 3.30 | 4.60 | 4.01 | 3.02 | 3.68 | 9.5 |
10 | 3/8 | 18 17.6 | 13.3 11.8 | 13.3 11.8 | 4.01 | 3.50 | 5.03 | 4.37 | 3.20 | 4.01 | 9.5 |
15 | 1/2 | 22.2 21.8 | 16.6 15.0 | 16.6 15.0 | 4.67 | 4.09 | 5.97 | 5.18 | 3.73 | 4.78 | 9.5 |
20 | 3/4 | 27.6 27.2 | 21.7 20.2 | 21.7 20.2 | 4.90 | 4.27 | 6.96 | 6.04 | 3.91 | 5.56 | 12.5 |
25 | 1 | 34.3 33.9 | 27.4 25.9 | 27.4 25.9 | 5.69 | 4.98 | 7.92 | 6.93 | 4.55 | 6.35 | 12.5 |
32 | 1-1/4 | 43.1 42.7 | 35.8 34.3 | 35.8 34.3 | 6.07 | 5.28 | 7.92 | 6.93 | 4.85 | 6.35 | 12.5 |
40 | 1-1/2 | 49.2 48.8 | 41.6 40.1 | 41.6 40.1 | 6.35 | 5.54 | 8.92 | 7.80 | 5.08 | 7.14 | 12.5 |
50 | 2 | 61.7 61.2 | 53.3 51.7 | 53.3 51.7 | 6.93 | 6.04 | 10.92 | 9.50 | 5.54 | 8.74 | 16.0 |
65 | 2-1/2 | 74.4 73.9 | 64.2 61.2 | 64.2 61.2 | 8.76 | 7.67 | 7.01 | 16.0 | |||
80 | 3 | 90.3 89.8 | 79.4 76.4 | 79.4 76.4 | 9.52 | 8.30 | 7.62 | 16.0 | |||
100 | 4 | 115.7 115.2 | 103.8 100.7 | 103.8 100.7 | 10.69 | 9.35 | 8.56 | 16.0 |
O.D. (Outside Daimeter) And I.D. (Inside Daimeter) | Equivalent List | Diameter Of Nominal Pipe | Threads Size In Inches |
5/16 | 0.313 | 1/16 | 27 |
13/32 | 0.405 | 1/8 | 27 |
35/64 | 0.540 | 1/4 | 18 |
43/64 | 0.675 | 3/8 | 18 |
27/32 | 0.840 | 1/2 | 14 |
1-3/64 | 1.050 | 3/4 | 14 |
1-5/16 | 1.315 | 1 | 11-1/2 |
1-21/32 | 1.660 | 1-1/4 | 11-1/2 |
1-29/32 | 1.900 | 1-1/2 | 11-1/2 |
2-3/8 | 2.375 | 2 | 11-1/2 |
2-7/8 | 2.875 | 2-1/2 | 8 |
3-1/2 | 3.500 | 3 | 8 |
4 | 4.000 | 3-1/2 | 8 |
4-1/2 | 4.500 | 4 | 8 |
Normal Pipe Size For (NPS) For ANSI/ASME B16.9 | 10S Schedule | 40S Schedule | 80S Schedule | ||||||
Buttweld 90 Degree Elbow | Buttweld 45 Degree Elbow | B16.9 Buttweld Equal Tee | Buttweld 90 Deg Elbows | Buttweld 45 Deg Elbows | B16.9 Buttweld Equal Tee | Buttweld 90 Degree Elbow | Buttweld 45 Degree Elbow | ASME B16.9 Buttweld Equal Tee | |
8 | 0.02 | 0.01 | 0.03 | 0.03 | 0.02 | 0.06 | 0.04 | 0.03 | 0.07 |
10 | 0.03 | 0.02 | 0.05 | 0.03 | 0.02 | 0.03 | 0.06 | 0.04 | 0.09 |
15 | 0.06 | 0.03 | 0.09 | 0.08 | 0.04 | 0.10 | 0.10 | 0.05 | 0.14 |
20 | 0.07 | 0.03 | 0.13 | 0.08 | 0.04 | 0.17 | 0.11 | 0.05 | 0.20 |
25 | 0.14 | 0.08 | 0.28 | 0.15 | 0.11 | 0.29 | 0.22 | 0.14 | 0.38 |
32 | 0.23 | 0.11 | 0.49 | 0.26 | 0.17 | 0.59 | 0.40 | 0.23 | 0.68 |
40 | 0.30 | 0.17 | 0.68 | 0.40 | 0.23 | 0.86 | 0.51 | 0.29 | 1.02 |
50 | 0.50 | 0.25 | 0.85 | 0.70 | 0.4 | 1.28 | 0.91 | 0.59 | 1.59 |
65 | 0.85 | 0.48 | 1.41 | 1.40 | 0.77 | 2.19 | 1.81 | 0.99 | 3.13 |
80 | 1.25 | 0.63 | 1.77 | 2.20 | 1.08 | 3.31 | 2.97 | 1.50 | 4.45 |
90 | 1.70 | 0.75 | 2.67 | 2.83 | 1.42 | 4.08 | 4.00 | 2.00 | 5.44 |
100 | 2.10 | 1.08 | 3.46 | 4.47 | 2.09 | 5.27 | 6.18 | 2.81 | 7.71 |
150 | 5.45 | 2.72 | 8.07 | 10.89 | 5.44 | 10.99 | 16.32 | 8.16 | 13.61 |
200 | 10.20 | 5.33 | 15.65 | 21.54 | 10.77 | 20.91 | 33.11 | 16.56 | 28.12 |
250 | 18.15 | 9.75 | 26.46 | 38.56 | 19.27 | 35.38 | 51.71 | 25.86 | 49.90 |
300 | 25.80 | 13.62 | 39.46 | 59.42 | 29.71 | 62.14 | 79.38 | 39.69 | 83.91 |
Normal Pipe Size For (NPS) For ANSI/ ASME B16.9 | 10S Schedule | 40S Schedule | 80S Schedule | ||||||
Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | |
40x.25 | 0.19 | 0.19 | 0.60 | 0.26 | 0.26 | 0.76 | 0.34 | 0.34 | 0.90 |
50x25 | 0.28 | 0.28 | 0.73 | 0.40 | 0.40 | 1.10 | 0.54 | 0.54 | 1.37 |
50x40 | 0.31 | 0.31 | 0.76 | 0.45 | 0.45 | 1.15 | 0.59 | 0.59 | 1.43 |
80x.50 | 0.55 | 0.55 | 1.56 | 1.00 | 1.00 | 2.91 | 1.79 | 1.79 | 3.91 |
100x50 | 0.78 | 0.78 | 2.94 | 1.50 | 1.50 | 4.48 | 1.95 | 1.95 | 6.55 |
100x80 | 0.87 | 0.87 | 3.04 | 1.74 | 1.74 | 4.64 | 2.33 | 2.33 | 6.79 |
150x80 | 1.82 | 1.82 | 6.86 | 3.95 | 3.95 | 9.68 | 5.51 | 5.51 | 11.57 |
150x100 | 1.96 | 1.96 | 7.10 | 4.07 | 4.07 | 11.94 | 5.96 | 5.96 | 11.97 |
200x100 | 3.01 | 3.01 | 13.46 | 6.55 | 6.55 | 17.98 | 9.23 | 9.23 | 24.18 |
200x150 | 3.19 | 3.19 | 14.08 | 6.74 | 6.74 | 18.82 | 10.12 | 10.12 | 25.31 |
+91-9987870874
info@fastwell.in
Shop No. 17/B1, Ground Floor Abbas Bldg. Wing A, Jalbhai Street, Near Cama Baug Khetwadi, Grant Road (E) Mumbai – 400004. India