WPHY stands for Wrought high yield strength and the fittings produced under these specifications can be used in applications with high pressure. WPHY 52 Fittings is one of the grades that belongs to this specification. They are used in severe environmental conditions as they can sustain corrosion in harsh conditions. MSS-SP75 WPHY 52 Elbow manufacturers In India usually heat treat this grade followed by tempering and quenching. They also offer good tensile strength. They can also be surface treated to provide protection and enhance resistance to corrosion.
Carbon Steel ASTM A860 WPHY 52 Buttweld Pipe Fittings provide increased durability and resistance to hydrogen stress cracking. Due to this the service life of these fittings tends to belong. That, in turn, reduces the cost of maintenance and repairs thus making them cost effective. A860 WPHY 52 Stub End is also used in sour wells as the hydrogen sulfide gas reacts with water the hydrogen molecules get deposited on fittings or pipes. These deposits cause the pipes to crack. These fittings prevent it as they are resistant to cracking due to hydrogen in sour wells.
Grade WPHY 52 High Yield CS Welded Fittings are widely used in offshore oil drilling companies, gas processing, heat exchangers, petrochemical industry, and pharmaceutical industries. Moreover, these A860 Gr WPHY 52 End Caps are also used in condensers, pulp, and paper industry, power generation, chemical industry, along marine and seawater equipment. ASME SA860 WPHY 52 Concentric Pipe Reducer manufactured by us helps in connecting pipes with different diameter and provide a tight seal. They are manufactured as per the WPYH standard and are supplied at a price that is lower than our competitors.
Type Of Fittings | Size | SCH | Material | Price In INR (India) Per Piece |
---|---|---|---|---|
ASTM A860 WPHY 52 Tee | 1/2" | Sch 40 | - | 100.00 |
Equal Tee | 3/4" | Sch 40 | - | 165.00 |
Equal Tee | 1" | Sch 40 | - | 245.00 |
Equal Tee | 1 1/4" | Sch 40 | - | 348.00 |
Equal Tee | 2" | Sch 40 | - | 457.00 |
90 Deg Elbow | 1/2" | Sch 40 | ASTM A860 WPHY 52 | 158.00 |
90 Deg Elbow | 3/4" | Sch 40 | - | 336.00 |
90 Deg Elbow | 1" | Sch 40 | - | 426.00 |
90 Deg Elbow | 1 1/4" | Sch 40 | - | 536.00 |
90 Deg Elbow | 2" | Sch 40 | - | 658.00 |
90 Deg Elbow | 4" | Sch 40 | - | 758.00 |
ASTM A860 WPHY Reducer | 3/4 X 1/2" | Sch 40 | - | 234.00 |
Concentric Reducer | 1 X 1/2" | Sch 40 | - | 300.00 |
Concentric Reducer | 1 X 3/4" | Sch 40 | - | 367.00 |
Concentric Reducer | 3 X 2" | Sch 40 | ASTM A860 WPHY 52 | 563.00 |
ISO approved Wphy 52 Fittings Manufacturer In India. For final ASTM A860 WPHY 52 Fittings Price List Please Call on +91-9987870874 or drop an Email to info@fastwell.in.
Normal Size Of Pipe | Outside Dai Of (D) | 90 degree (Long Radius) Center-to-End (A) | 45 degree (Long Radius) Center-to-End (B) | 90 degree (3D) Center-to-End (A) | 45 degree (3D) Center-to-End (B) |
1/2 | 21.3 | 38 | 16 | – | – |
3/4 | 26.7 | 38 | 19 | 57 | 24 |
1 | 33.4 | 38 | 22 | 76 | 31 |
1¼ | 42.2 | 48 | 25 | 95 | 39 |
1½ | 48.3 | 57 | 29 | 114 | 47 |
2 | 60.3 | 76 | 35 | 152 | 63 |
2½ | 73 | 95 | 44 | 190 | 79 |
3 | 88.9 | 114 | 51 | 229 | 95 |
3½ | 101.6 | 133 | 57 | 267 | 111 |
4 | 114.3 | 152 | 64 | 305 | 127 |
5 | 141.3 | 190 | 79 | 381 | 157 |
6 | 168.3 | 229 | 95 | 457 | 189 |
8 | 219.1 | 305 | 127 | 610 | 252 |
10 | 273 | 381 | 159 | 762 | 316 |
12 | 323.8 | 457 | 190 | 914 | 378 |
14 | 355.6 | 533 | 222 | 1067 | 441 |
16 | 406.4 | 610 | 254 | 1219 | 505 |
18 | 457 | 686 | 286 | 1372 | 568 |
20 | 508 | 762 | 318 | 1524 | 632 |
22 | 559 | 838 | 343 | 1676 | 694 |
24 | 610 | 914 | 381 | 1829 | 757 |
26 | 660 | 991 | 406 | 1981 | 821 |
28 | 711 | 1067 | 438 | 2134 | 883 |
30 | 762 | 1143 | 470 | 2286 | 964 |
32 | 813 | 1219 | 502 | 2438 | 1010 |
34 | 864 | 1295 | 533 | 2591 | 1073 |
36 | 914 | 1372 | 565 | 2743 | 1135 |
38 | 965 | 1448 | 600 | 2896 | 1200 |
40 | 1016 | 1524 | 632 | 3048 | 1264 |
42 | 1067 | 1600 | 660 | 3200 | 1326 |
44 | 1118 | 1676 | 695 | 3353 | 1389 |
46 | 1168 | 1753 | 727 | 3505 | 1453 |
48 | 1219 | 1829 | 759 | 3658 | 1516 |
Standard Of Pipe | Specification | . Bauart 5 | 2,5D | |
---|---|---|---|---|
Size | Dia. [Outside Daimeter] | CLR | CLR | CLR |
20 | 26,9 | 110 | 67 | |
25 | 33,7 | 110 | 84 | |
32 | 42,4 | 110 | 106 | |
40 | 48,3 | 110 | 212 | |
50 | 60,3 | 125 | 151 | |
65 | 76,1 | 175 | 190 | |
80 | 88,9 | 205 | 222 | |
100 | 114,3 | 270 | 286 | |
125 | 139,7 | 330 | 350 | |
150 | 168,3 | 390 | 421 | |
200 | 219,1 | 510 | ||
250 | 273 | 650 | ||
300 | 323,9 | 775 | ||
350 | 355,6 | 850 | ||
400 | 406,4 | 970 | ||
500 | 508 | 1245 |
For all Buttweld Pipe fittings | ASTM A860 WPHY 52 Fittings | |||
NPS Of End Cap | O.D. For (Outside Daimeter) Ø at Bevel | I.D. For (Inside Daimeter) Ø at End | Wall Thick. t / t1 | Overall Length (E) |
1/2 a 2 1/2 | 1 | 0,8 | Not | 4 |
3 a 3 1/2 | 1 | 1,6 | less | 4 |
4 | +2 -1 | 1,6 | than | 4 |
5 a 6 | +3 -1 | 1,6 | 87,50% | 7 |
8 | 2 | 1,6 | of nominal | 7 |
10 | +4 -3 | 3,2 | tickness | 7 |
12 a 18 | +4 -3 | 3,2 | 7 | |
20 a 24 | +6 -5 | 4,8 | 7 | |
26 a 30 | +7 -5 | 4,8 | 10 | |
32 a 48 | +7 -5 | 4,8 | 10 |
RCD Reiso Code | BIG Ø | SMALL Ø | Hight (H) MM | Theoretical Weight In KG (Kilogram) | ||||
---|---|---|---|---|---|---|---|---|
(DN) | (D) MM | Thickness Of (S) In MM. | (DN) | (D) MM | Thickness Of (S) MM | |||
27 21 | 3/4 | 26.9 | 2.3 | 1/2 | 21.3 | 2.0 | 38 | 0.08 |
33 21 | 1 | 33.7 | 2.6 | 1/2 | 21.3 | 2.0 | 50 | 0.09 |
33 27 | 3/4 | 26.9 | 2.3 | 0.09 | ||||
42 21 | 1"1/4 | 42.4 | 2.6 | 1/2 | 21.3 | 2.0 | 50 | 0.12 |
42 27 | 3/4 | 26.9 | 2.3 | 0.13 | ||||
42 33 | 1 | 33.7 | 2.6 | 0.14 | ||||
*48 21 | 1"1/2 | 48.3 | 2.6 | 1/2 | 21.3 | 2.0 | 64 | 0.18 |
48 27 | 3/4 | 26.9 | 2.3 | 0.19 | ||||
48 33 | 1 | 33.7 | 2.6 | 0.20 | ||||
48 42 | 1"1/4 | 42.4 | 2.6 | 0.20 | ||||
60 27 | 2 | 60.3 | 2.9 | 3/4 | 26.9 | 2.3 | 76 | 0.30 |
60 33 | 1 | 33.7 | 2.6 | 0.31 | ||||
60 42 | 1"1/4 | 42.4 | 2.6 | 0.32 | ||||
60 48 | 1"1/2 | 48.3 | 2.6 | 0.33 | ||||
76 33 | 2"1/2 | 76.1 | 2.9 | 1 | 33.7 | 2.6 | 90 | 0.40 |
76 42 | 1"1/4 | 42.4 | 2.6 | 0.47 | ||||
76 48 | 1"1/2 | 48.3 | 2.6 | 0.48 | ||||
76 60 | 2 | 60.3 | 2.6 | 0.49 | ||||
89 42 | 3 | 88.9 | 3.2 | 1"1/4 | 42.4 | 2.6 | 90 | 0.55 |
89 48 | 1"1/2 | 48.3 | 2.6 | 0.61 | ||||
89 60 | 2 | 60.3 | 2.9 | 0.62 | ||||
89 76 | 2"1/2 | 76.1 | 2.9 | 0.63 | ||||
114 48 | 4 | 114.3 | 3.6 | 1"1/2 | 48.3 | 2.6 | 100 | 0.85 |
114 60 | 2 | 60.3 | 2.9 | 0.98 | ||||
114 76 | 2"1/2 | 76.1 | 2.9 | 1.00 | ||||
114 89 | 3 | 88.9 | 3.2 | 1.02 | ||||
139 60 | 5 | 139.7 | 4.0 | 2 | 60.3 | 2.9 | 127 | 1.60 |
139 76 | 2"1/2 | 76.1 | 2.9 | 1.70 | ||||
139 89 | 3 | 88.9 | 3.2 | 1.74 | ||||
139 114 | 4 | 114.3 | 3.6 | 1.76 | ||||
*168 76 | 6 | 168.3 | 4.5 | 2"1/2 | 76.1 | 2.9 | 140 | 2.60 |
168 89 | 3 | 88.9 | 3.2 | 2.70 | ||||
168 114 | 4 | 114.3 | 3.6 | 2.82 | ||||
168 139 | 5 | 139.7 | 4.0 | 2.94 | ||||
219 114 | 8 | 219.1 | 6.3 | 4 | 114.3 | 3.6 | 152 | 5.03 |
219 139 | 5 | 139.7 | 4.0 | 5.12 | ||||
219 168 | 6 | 168.3 | 4.5 | 5.18 | ||||
*273 114 | 10 | 273.0 | 6.3 | 4 | 114.3 | 3.6 | 178 | 7.00 |
*273 139 | 5 | 139.7 | 4.0 | 7.20 | ||||
273 168 | 6 | 168.3 | 4.5 | 7.40 | ||||
273 219 | 8 | 219.1 | 6.3 | 7.55 | ||||
323 168 | 12 | 323.9 | 7.1 | 6 | 168.3 | 4.5 | 203 | 11.00 |
323 219 | 8 | 219.1 | 6.3 | 11.10 | ||||
323 273 | 10 | 273 | 6.3 | 11.20 |
NPS Of Pipe Cap | O.D. (Outside Daimeter) Of D | Length Of (H) | Length Of (H1) |
1/2 | 21.3 | 25 | 25 |
3/4 | 26.7 | 25 | 25 |
1 | 33.4 | 38 | 38 |
1.1/4 | 42.2 | 38 | 38 |
1.1/2 | 48.3 | 38 | 38 |
2 | 60.3 | 38 | 44 |
2.1/2 | 73 | 38 | 51 |
3 | 88.9 | 51 | 64 |
3.1/2 | 101.6 | 64 | 76 |
4 | 114.3 | 64 | 76 |
5 | 141.3 | 76 | 89 |
6 | 168.3 | 89 | 102 |
8 | 219.1 | 102 | 127 |
10 | 273 | 127 | 152 |
12 | 323.8 | 152 | 178 |
14 | 355.6 | 165 | 191 |
16 | 406.4 | 178 | 203 |
18 | 457 | 203 | 229 |
20 | 508 | 229 | 254 |
22 | 559 | 254 | 254 |
24 | 610 | 267 | 305 |
26 | 660 | 267 | … |
28 | 711 | 267 | … |
30 | 762 | 267 | … |
32 | 813 | 267 | … |
34 | 864 | 237 | … |
36 | 914 | 267 | … |
38 | 965 | 305 | … |
40 | 1016 | 305 | … |
42 | 1067 | 305 | … |
44 | 1118 | 343 | … |
46 | 1168 | 343 | … |
48 | 1219 | 343 | … |
Normal Pipe Size For (NPS) | O.D. For (Outside Daimeter) of barrel | Length Of (F) | Radius Of(R) | Diameter Of (G) | ||
---|---|---|---|---|---|---|
(Min.) | (Max.) | ASME B16.9 Long Pattern | ASME B16.9 Short Pattern | |||
1/2″ | 20.5 | 22.8 | 76 | 51 | 3 | 35 |
3/4″ | 25.9 | 28.1 | 76 | 51 | 3 | 43 |
1″ | 32.6 | 35.0 | 102 | 51 | 3 | 51 |
1 1/4″ | 41.4 | 43.6 | 102 | 51 | 5 | 64 |
1 1/2″ | 47.5 | 49.9 | 102 | 51 | 6 | 74 |
2″ | 59.5 | 62.4 | 152 | 64 | 8 | 92 |
2 1/2″ | 72.2 | 75.3 | 152 | 64 | 8 | 105 |
3″ | 88.1 | 91.3 | 152 | 64 | 10 | 127 |
3 1/2″ | 100.8 | 104.0 | 152 | 76 | 10 | 140 |
4″ | 113.5 | 116.7 | 152 | 76 | 11 | 157 |
5″ | 140.5 | 144.3 | 203 | 76 | 11 | 186 |
6″ | 167.5 | 171.3 | 203 | 89 | 13 | 216 |
8″ | 218.3 | 222.1 | 203 | 102 | 13 | 270 |
10″ | 272.3 | 277.2 | 254 | 127 | 13 | 324 |
12″ | 323.1 | 328.0 | 254 | 152 | 13 | 381 |
14″ | 354.8 | 359.9 | 305 | 152 | 13 | 413 |
16″ | 405.6 | 411.0 | 305 | 152 | 13 | 470 |
18″ | 456.0 | 462.0 | 305 | 152 | 13 | 533 |
20″ | 507.0 | 514.0 | 305 | 152 | 13 | 584 |
22″ | 558.0 | 565.0 | 305 | 152 | 13 | 641 |
24″ | 609.0 | 616.0 | 305 | 152 | 13 | 692 |
Tensile Strength | |
---|---|
ksi | MPa |
66-91 | 455-625 |
Specification List Of | ASTM A860 WPHY 52 Fittings |
---|---|
Application Use In WPHY 52 Elbow: | Nuclear Power Plant Natural Gas Industry Chemical Industry Water Pipeline Industry |
Buttweld Fittings Machining Equipment | Sand-blasting machine/ Bending machine/ Pushing Machine/ Press machine/ Electric bevelling machine etc |
Connection Type | Welding |
WPHY 52 Fittings Common Type | Elbow/ Tee/ Reducer/ End Cap/ Stub End/ Pipe Bend. |
Chemical Composition | Phosphorus (≤0.030), Sulfur (≤0.010), Chromium (≤0.30*C), Molybdenum (≤0.25*C), Silicon (0.15-0.40*B), Carbon (≤0.20*A), Manganese (1.00-1.45), Nickel (≤0.50*C). |
Size Chart | BW (1/2” TO 36” Inch) SMLS (1” TO 48”) |
ASME Standard | IS B2313/ ASME B16.9/ MSS-SP-43 Type B, MSS-SP-43 Type A/ JIS B2312/ ANSI B16.28 |
Pressure Class | 3000 LBS/ 6000 LBS/ 9000 LBS |
Schedule: | SCH 5S, SCH40, SCH60, SCH120, SCH140, SCH160, SCH20, SCH30, SCH80, SCH100 XS. |
O.D. (Outside Daimeter) And I.D. (Inside Daimeter) | Equivalent List | Diameter Of Nominal Pipe | Threads Size In Inches |
5/16 | 0.313 | 1/16 | 27 |
13/32 | 0.405 | 1/8 | 27 |
35/64 |
0.540 |
1/4 | 18 |
43/64 | 0.675 | 3/8 | 18 |
27/32 | 0.840 | 1/2 | 14 |
1-3/64 | 1.050 | 3/4 | 14 |
1-5/16 | 1.315 | 1 | 11-1/2 |
1-21/32 |
1.660 | 1-1/4 | 11-1/2 |
1-29/32 | 1.900 | 1-1/2 | 11-1/2 |
2-3/8 | 2.375 | 2 | 11-1/2 |
2-7/8 | 2.875 | 2-1/2 | 8 |
3-1/2 | 3.500 | 3 | 8 |
4 | 4.000 | 3-1/2 | 8 |
4-1/2 | 4.500 | 4 | 8 |
Normal Pipe Size For (NPS) For ANSI/ASME B16.9 | 10S Schedule | 40S Schedule | 80S Schedule | ||||||
Buttweld 90 Degree Elbow | Buttweld 45 Degree Elbow | B16.9 Buttweld Equal Tee | Buttweld 90 Deg Elbows | Buttweld 45 Deg Elbows | B16.9 Buttweld Equal Tee | Buttweld 90 Degree Elbow | Buttweld 45 Degree Elbow | ASME B16.9 Buttweld Equal Tee | |
8 | 0.02 | 0.01 | 0.03 | 0.03 | 0.02 | 0.06 | 0.04 | 0.03 | 0.07 |
10 | 0.03 | 0.02 | 0.05 | 0.03 | 0.02 | 0.03 | 0.06 | 0.04 | 0.09 |
15 | 0.06 | 0.03 | 0.09 | 0.08 | 0.04 | 0.10 | 0.10 | 0.05 | 0.14 |
20 | 0.07 | 0.03 | 0.13 | 0.08 | 0.04 | 0.17 | 0.11 | 0.05 | 0.20 |
25 | 0.14 | 0.08 | 0.28 | 0.15 | 0.11 | 0.29 | 0.22 | 0.14 | 0.38 |
32 | 0.23 | 0.11 | 0.49 | 0.26 | 0.17 | 0.59 | 0.40 | 0.23 | 0.68 |
40 | 0.30 | 0.17 | 0.68 | 0.40 | 0.23 | 0.86 | 0.51 | 0.29 | 1.02 |
50 | 0.50 | 0.25 | 0.85 | 0.70 | 0.4 | 1.28 | 0.91 | 0.59 | 1.59 |
65 | 0.85 | 0.48 | 1.41 | 1.40 | 0.77 | 2.19 | 1.81 | 0.99 | 3.13 |
80 | 1.25 | 0.63 | 1.77 | 2.20 | 1.08 | 3.31 | 2.97 | 1.50 | 4.45 |
90 | 1.70 | 0.75 | 2.67 | 2.83 | 1.42 | 4.08 | 4.00 | 2.00 | 5.44 |
100 | 2.10 | 1.08 | 3.46 | 4.47 | 2.09 | 5.27 | 6.18 | 2.81 | 7.71 |
150 | 5.45 | 2.72 | 8.07 | 10.89 | 5.44 | 10.99 | 16.32 | 8.16 | 13.61 |
200 | 10.20 | 5.33 | 15.65 | 21.54 | 10.77 | 20.91 | 33.11 | 16.56 | 28.12 |
250 | 18.15 | 9.75 | 26.46 | 38.56 | 19.27 | 35.38 | 51.71 | 25.86 | 49.90 |
300 | 25.80 | 13.62 | 39.46 | 59.42 | 29.71 | 62.14 | 79.38 | 39.69 | 83.91 |
Normal Pipe Size For (NPS) For ANSI/ ASME B16.9 | 10S Schedule | 40S Schedule | 80S Schedule | ||||||
Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | |
40x.25 | 0.19 | 0.19 | 0.60 | 0.26 | 0.26 | 0.76 | 0.34 | 0.34 | 0.90 |
50x25 | 0.28 | 0.28 | 0.73 | 0.40 | 0.40 | 1.10 | 0.54 | 0.54 | 1.37 |
50x40 | 0.31 | 0.31 | 0.76 | 0.45 | 0.45 | 1.15 | 0.59 | 0.59 | 1.43 |
80x.50 | 0.55 | 0.55 | 1.56 | 1.00 | 1.00 | 2.91 | 1.79 | 1.79 | 3.91 |
100x50 | 0.78 | 0.78 | 2.94 | 1.50 | 1.50 | 4.48 | 1.95 | 1.95 | 6.55 |
100x80 | 0.87 | 0.87 | 3.04 | 1.74 | 1.74 | 4.64 | 2.33 | 2.33 | 6.79 |
150x80 | 1.82 | 1.82 | 6.86 | 3.95 | 3.95 | 9.68 | 5.51 | 5.51 | 11.57 |
150x100 | 1.96 | 1.96 | 7.10 | 4.07 | 4.07 | 11.94 | 5.96 | 5.96 | 11.97 |
200x100 | 3.01 | 3.01 | 13.46 | 6.55 | 6.55 | 17.98 | 9.23 | 9.23 | 24.18 |
200x150 | 3.19 | 3.19 | 14.08 | 6.74 | 6.74 | 18.82 | 10.12 | 10.12 | 25.31 |
ASTM A860 WPHY 52 Fittings Marking includes ANSI Or ASME/ ASA Code
Carbon Steel WPHY 52 Equal Tee
MSS-SP 75 WPHY 52 Eccentric Reducer
WPHY 52 Reducing Cross
52 Buttweld 90 Deg Bend
Carbon Steel WPHY 52 Elbow
MSS-SP 75 WPHY 52 Tee
Grade WPHY 52 Reducer
High Yield WPHY 52 End Cap
NPS Of Equal Tee | Outside Daimeter (O.D.) at bevel | Center-to-End | |
---|---|---|---|
(C) Run | (M) Outlet | ||
1/2" | 21.3 | 25 | 25 |
3/4" | 26.7 | 29 | 29 |
1" | 33.4 | 38 | 38 |
1 1/4" | 42.2 | 48 | 48 |
1 1/2" | 48.3 | 57 | 57 |
2" | 60.3 | 64 | 64 |
2 1/2" | 73.0 | 76 | 76 |
3" | 88.9 | 86 | 86 |
3 1/2" | 101.6 | 95 | 95 |
4" | 114.3 | 105 | 105 |
5" | 141.3 | 124 | 124 |
6" | 168.3 | 143 | 143 |
8" | 219.1 | 178 | 178 |
10" | 273.0 | 216 | 216 |
12" | 323.8 | 254 | 254 |
14" | 355.6 | 279 | 279 |
16" | 406.4 | 305 | 305 |
18" | 457.0 | 343 | 343 |
20" | 508.0 | 381 | 381 |
22" | 559.0 | 419 | 419 |
24" | 610.0 | 432 | 432 |
Pressure ratings (psig) | |||||
---|---|---|---|---|---|
WPHY 52 Fittings Temperature Ratings | Type Of Pressure Class | ||||
150 LBS | 300 LBS | ||||
1/4 - 1 Inches | 1 1/4 - 2 Inches | 2 1/2 - 3 Inches | |||
(oF) | (oC) | ||||
-20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
200 | 93 | 265 | 1785 | 1350 | 910 |
250 | 121 | 225 | 1575 | 1200 | 825 |
300 | 149 | 185 | 1360 | 1050 | 735 |
350 | 177 | 150 | 1150 | 900 | 650 |
400 | 204 | - | 935 | 750 | 560 |
450 | 232 | - | 725 | 600 | 475 |
500 | 260 | - | 510 | 450 | 385 |
550 | 288 | - | 300 | 300 | 300 |
Elongation, minimum | |
---|---|
% | 25 |
ASTM A860 WPHY 52 Fittings Chemical Composition | |
---|---|
Sulfur | ≤0.010 |
Silicon | 0.15-0.40*B |
Nickel | ≤0.50*C |
Chromium | ≤0.30*C |
Carbon | ≤0.20*A |
Manganese | 1.00-1.45 |
Vanadium plus Columnium | ≤0.12 |
Aluminum | ≤0.06 |
Titanium | ≤0.05 |
Vanadium | ≤0.10 |
Columbium | ≤0.04 |
Phosphorus | ≤0.030 |
Molybdenum | ≤0.25*C |
Copper | ≤0.35*C |
ASTM A860/ 860M | Yield Strength, (minimum) | Tensile Strength | Elongation, (minimum) | Cv, avg./(minimum) | |||
---|---|---|---|---|---|---|---|
Grade | ksi | MPa | ksi | MPa | % | ft*lbs | J |
ASTM A860 WPHY 52 Fittings | 52 | 360 | 66-91 | 455-625 | 25 | 30/25 | 40/34 |
Yield Strength, minimum | |
---|---|
ksi | MPa |
52 | 360 |
WPHY 52 Fittings
United Kingdom -UK, Europe, Malaysia, UAE
ASTM A860 WPHY 52 Buttweld Pipe Fittings
Indonesia, Philippines, Dammam -KSA
MSS-SP75 WPHY 52 Elbow
Thailand, France, Qatar, Europe
A860 WPHY 52 Stub End
Bangladesh, USA, Germany, Finland
Grade WPHY 52 High Yield CS Welded Fittings
Saudi Arabia (KSA), South Africa, Brazil, Kuwait
A860 Gr WPHY 52 End Cap
Turkey, Nigeria, Egypt, UK, Australia, Belgium
ASME SA860 Wrought Pipe High Yield 52 Concentric Reducer
Mexico, Poland, Hong Kong, Spain, Oman, Japan
Carbon Steel WPHY 52 Fittings
Singapore, Iran, Canada, Italy, Chile, China
+91-9987870874
info@fastwell.in
Shop No. 17/B1, Ground Floor Abbas Bldg. Wing A, Jalbhai Street, Near Cama Baug Khetwadi, Grant Road (E) Mumbai – 400004. India