Titanium is a material that naturally occurs bonded with other elements. It is used to manufacture various components in a piping system. Titanium Fittings offer good tensile strength and dimensional accuracy. According to Titanium Pipe Fittings manufacturer In India, it is an anti corrosive metal with excellent chemical and mechanical properties. These fittings are well known for their low weight, high strength, and good resistance to corrosion. ASTM B363Buttweld Fittings is formidable in both water and corrosive media. These fittings have a low modulus of elasticity.
This means that ASTM B363 Buttweld Fittings are very much flexible and can return to their original shape after bending. Titanium Compression Fittings are used in electrical channels and plumbing work to connect thin pipes. These fittings are biocompatible and non-magnetic this has led to an increase in the use of Titanium Forged Fittings in the medical field. These fittings are available in 2 grades. Titanium 5 and Titanium 2. They offer low density as well as low string stress. They are resistant to a number of organic chemicals and acids such as hydrogen, alkaline, oxygen, sulfur dioxide, and seawater.
Ti Weld Fittings maintain their structural quality for a long period of time this helps in lowering the cost of maintenance. These Titanium Tube Fittings can also resist corrosion in sulfuric acid, phosphoric acid, nitric acid, and anodizing treatment. The price range of these fittings ranges from Rs. 12000 to Rs. 97000. DIN 2605 Titanium Pipe Reducer belonging to grade 2 display good electrical conductivity and are used in various applications. We have been manufacturing and supplying these Ti Seamless Fittings as per international standards and even customize them if required by the customer.
Normal Pipe Size For (NPS) | Outside Daimeter For (O.D.) | Buttweld 90 Deg Elbow | Buttweld 45 Deg Elbow | Buttweld Return 180 Deg Elbow | ||||
---|---|---|---|---|---|---|---|---|
(In Inches) | Buttweld LR Elbow | Buttweld SR Elbow | Buttweld LR Elbow | Buttweld LR Elbow | ||||
(MM/ millimeter) | (Inches/ inch.) | Center to Face (In Inch) | Center to Face (In Inch) | Center to Face (In Inch) | Radius (In Inch) | Center to Center (In Inch) | Back to face (In Inch) | |
1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
Normal Pipe Size For (NPS) | Outside Daimeter For (O.D.) | ASME/ANSI B16.9 BW End Cap | ASME/ANSI B16.9 BW Straight Tee | ASME/ANSI B16.9 BW Straight Cross | ASME B16.9 BW Stub Ends | |||
---|---|---|---|---|---|---|---|---|
(Inches/ inch.) | (MM/ millimeter) | (Inch.) | Length (Inch.) | Center to End (Inch.) | Center to End (Inch.) | Lap Diameter (Inch.) | Long Length (Inch.) | Short Length (Inch.) |
1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Type Of Fittings | Size | SCH | Material | Price In INR (India) Per Piece |
---|---|---|---|---|
Titanium Gr 2 Tee | 1/2" | Schedule 40 | - | 253.00 |
Equal Tee | 3/4" | Schedule 40 | - | 346.00 |
Equal Tee | 3/1" | Schedule 40 | - | 543.00 |
Equal Tee | 2" | Schedule 40 | - | 732.00 |
Equal Tee | 3" | Schedule 40 | - | 898.00 |
Equal Tee | 4" | Schedule 40 | - | 1036.00 |
Titanium Gr 2 Reducer | 3/4 X 1/2 | SCH 160 | - | 300.00 |
Concentric Reducer | 1 X 1/2" | SCH 160 | - | 432.00 |
Concentric Reducer | 4 X 2" | SCH 160 | - | 763.00 |
Concentric Reducer | 5 X 4" | SCH 40 | - | 1253.00 |
Concentric Reducer | 6 X 4" | SCH 80 | - | 1465.00 |
Titanium Gr 2 Elbow | 3/4" | SCH 40 | - | 342.00 |
90 Deg Elbow | 1" | SCH 40 | - | 487.00 |
90 Deg Elbow | 2" | SCH 40 | - | 678.00 |
90 Deg Elbow | 3" | SCH 40 | - | 898.00 |
90 Deg Elbow | 4" | SCH 40 | - | 1126.00 |
90 Deg Elbow | 5" | SCH 40 | - | 1365.00 |
90 Deg Elbow | 6" | SCH 40 | - | 1587.00 |
Titanium Gr 2 End Cap | 1/2" | Schedule 40 | - | 342.00 |
End Cap | 3/4" | Schedule 40 | - | 465.00 |
End Cap | 1" | Schedule 40 | - | 698.00 |
End Cap | 1 1/4" | Schedule 40 | - | 986.00 |
End Cap | 2" | Schedule 40 | Titanium Gr 2 | 1253.00 |
PED Approved Titanium Pipe Fittings manufacturer In India. For final Ti Fittings Price List Please Call on +91-9987870874 or drop an Email to info@fastwell.in.
Hs Code | Description | Number of Shipments |
---|---|---|
810890 | Titanium Fitting | - |
Titanium Fittings
Kuwait, Brazil, South Africa, Saudi Arabia (KSA)
Titanium Tube Fitting
Australia, Nigeria, Turkey, Egypt, UK, Belgium
Titanium Pipe Fittings
Hong Kong, Oman, Mexico, Spain, Poland, Japan
Titanium Compression Fittings
Chile, Singapore, Iran, Canada, Italy, China
Titanium Weld Fittings
Europe, Malaysia, United Kingdom -UK, UAE
Titanium Exhaust Elbow
Dammam -KSA, Philippines, Indonesia
Titanium Reducer
Qatar, France, Thailand, Europe
Titanium End Cap
Bangladesh, Germany, USA, Finland
Normal Pipe Size For (NPS) For ANSI/ASME B16.9 | 10S Schedule | 40S Schedule | 80S Schedule | ||||||
Buttweld 90 Degree Elbow | Buttweld 45 Degree Elbow | B16.9 Buttweld Equal Tee | Buttweld 90 Deg Elbows | Buttweld 45 Deg Elbows | B16.9 Buttweld Equal Tee | Buttweld 90 Degree Elbow | Buttweld 45 Degree Elbow | ASME B16.9 Buttweld Equal Tee | |
8 | 0.02 | 0.01 | 0.03 | 0.03 | 0.02 | 0.06 | 0.04 | 0.03 | 0.07 |
10 | 0.03 | 0.02 | 0.05 | 0.03 | 0.02 | 0.03 | 0.06 | 0.04 | 0.09 |
15 | 0.06 | 0.03 | 0.09 | 0.08 | 0.04 | 0.10 | 0.10 | 0.05 | 0.14 |
20 | 0.07 | 0.03 | 0.13 | 0.08 | 0.04 | 0.17 | 0.11 | 0.05 | 0.20 |
25 | 0.14 | 0.08 | 0.28 | 0.15 | 0.11 | 0.29 | 0.22 | 0.14 | 0.38 |
32 | 0.23 | 0.11 | 0.49 | 0.26 | 0.17 | 0.59 | 0.40 | 0.23 | 0.68 |
40 | 0.30 | 0.17 | 0.68 | 0.40 | 0.23 | 0.86 | 0.51 | 0.29 | 1.02 |
50 | 0.50 | 0.25 | 0.85 | 0.70 | 0.4 | 1.28 | 0.91 | 0.59 | 1.59 |
65 | 0.85 | 0.48 | 1.41 | 1.40 | 0.77 | 2.19 | 1.81 | 0.99 | 3.13 |
80 | 1.25 | 0.63 | 1.77 | 2.20 | 1.08 | 3.31 | 2.97 | 1.50 | 4.45 |
90 | 1.70 | 0.75 | 2.67 | 2.83 | 1.42 | 4.08 | 4.00 | 2.00 | 5.44 |
100 | 2.10 | 1.08 | 3.46 | 4.47 | 2.09 | 5.27 | 6.18 | 2.81 | 7.71 |
150 | 5.45 | 2.72 | 8.07 | 10.89 | 5.44 | 10.99 | 16.32 | 8.16 | 13.61 |
200 | 10.20 | 5.33 | 15.65 | 21.54 | 10.77 | 20.91 | 33.11 | 16.56 | 28.12 |
250 | 18.15 | 9.75 | 26.46 | 38.56 | 19.27 | 35.38 | 51.71 | 25.86 | 49.90 |
300 | 25.80 | 13.62 | 39.46 | 59.42 | 29.71 | 62.14 | 79.38 | 39.69 | 83.91 |
Normal Pipe Size For (NPS) For ANSI/ ASME B16.9 | 10S Schedule | 40S Schedule | 80S Schedule | ||||||
Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | |
40x.25 | 0.19 | 0.19 | 0.60 | 0.26 | 0.26 | 0.76 | 0.34 | 0.34 | 0.90 |
50x25 | 0.28 | 0.28 | 0.73 | 0.40 | 0.40 | 1.10 | 0.54 | 0.54 | 1.37 |
50x40 | 0.31 | 0.31 | 0.76 | 0.45 | 0.45 | 1.15 | 0.59 | 0.59 | 1.43 |
80x.50 | 0.55 | 0.55 | 1.56 | 1.00 | 1.00 | 2.91 | 1.79 | 1.79 | 3.91 |
100x50 | 0.78 | 0.78 | 2.94 | 1.50 | 1.50 | 4.48 | 1.95 | 1.95 | 6.55 |
100x80 | 0.87 | 0.87 | 3.04 | 1.74 | 1.74 | 4.64 | 2.33 | 2.33 | 6.79 |
150x80 | 1.82 | 1.82 | 6.86 | 3.95 | 3.95 | 9.68 | 5.51 | 5.51 | 11.57 |
150x100 | 1.96 | 1.96 | 7.10 | 4.07 | 4.07 | 11.94 | 5.96 | 5.96 | 11.97 |
200x100 | 3.01 | 3.01 | 13.46 | 6.55 | 6.55 | 17.98 | 9.23 | 9.23 | 24.18 |
200x150 | 3.19 | 3.19 | 14.08 | 6.74 | 6.74 | 18.82 | 10.12 | 10.12 | 25.31 |
RCD Reiso Code | BIG Ø | SMALL Ø | Hight (H) MM | Theoretical Weight In KG (Kilogram) | ||||
---|---|---|---|---|---|---|---|---|
(DN) | (D) MM | Thickness Of (S) In MM. | (DN) | (D) MM | Thickness Of (S) MM | |||
27 21 | 3/4 | 26.9 | 2.3 | 1/2 | 21.3 | 2.0 | 38 | 0.08 |
33 21 | 1 | 33.7 | 2.6 | 1/2 | 21.3 | 2.0 | 50 | 0.09 |
33 27 | 3/4 | 26.9 | 2.3 | 0.09 | ||||
42 21 | 1"1/4 | 42.4 | 2.6 | 1/2 | 21.3 | 2.0 | 50 | 0.12 |
42 27 | 3/4 | 26.9 | 2.3 | 0.13 | ||||
42 33 | 1 | 33.7 | 2.6 | 0.14 | ||||
*48 21 | 1"1/2 | 48.3 | 2.6 | 1/2 | 21.3 | 2.0 | 64 | 0.18 |
48 27 | 3/4 | 26.9 | 2.3 | 0.19 | ||||
48 33 | 1 | 33.7 | 2.6 | 0.20 | ||||
48 42 | 1"1/4 | 42.4 | 2.6 | 0.20 | ||||
60 27 | 2 | 60.3 | 2.9 | 3/4 | 26.9 | 2.3 | 76 | 0.30 |
60 33 | 1 | 33.7 | 2.6 | 0.31 | ||||
60 42 | 1"1/4 | 42.4 | 2.6 | 0.32 | ||||
60 48 | 1"1/2 | 48.3 | 2.6 | 0.33 | ||||
76 33 | 2"1/2 | 76.1 | 2.9 | 1 | 33.7 | 2.6 | 90 | 0.40 |
76 42 | 1"1/4 | 42.4 | 2.6 | 0.47 | ||||
76 48 | 1"1/2 | 48.3 | 2.6 | 0.48 | ||||
76 60 | 2 | 60.3 | 2.6 | 0.49 | ||||
89 42 | 3 | 88.9 | 3.2 | 1"1/4 | 42.4 | 2.6 | 90 | 0.55 |
89 48 | 1"1/2 | 48.3 | 2.6 | 0.61 | ||||
89 60 | 2 | 60.3 | 2.9 | 0.62 | ||||
89 76 | 2"1/2 | 76.1 | 2.9 | 0.63 | ||||
114 48 | 4 | 114.3 | 3.6 | 1"1/2 | 48.3 | 2.6 | 100 | 0.85 |
114 60 | 2 | 60.3 | 2.9 | 0.98 | ||||
114 76 | 2"1/2 | 76.1 | 2.9 | 1.00 | ||||
114 89 | 3 | 88.9 | 3.2 | 1.02 | ||||
139 60 | 5 | 139.7 | 4.0 | 2 | 60.3 | 2.9 | 127 | 1.60 |
139 76 | 2"1/2 | 76.1 | 2.9 | 1.70 | ||||
139 89 | 3 | 88.9 | 3.2 | 1.74 | ||||
139 114 | 4 | 114.3 | 3.6 | 1.76 | ||||
*168 76 | 6 | 168.3 | 4.5 | 2"1/2 | 76.1 | 2.9 | 140 | 2.60 |
168 89 | 3 | 88.9 | 3.2 | 2.70 | ||||
168 114 | 4 | 114.3 | 3.6 | 2.82 | ||||
168 139 | 5 | 139.7 | 4.0 | 2.94 | ||||
219 114 | 8 | 219.1 | 6.3 | 4 | 114.3 | 3.6 | 152 | 5.03 |
219 139 | 5 | 139.7 | 4.0 | 5.12 | ||||
219 168 | 6 | 168.3 | 4.5 | 5.18 | ||||
*273 114 | 10 | 273.0 | 6.3 | 4 | 114.3 | 3.6 | 178 | 7.00 |
*273 139 | 5 | 139.7 | 4.0 | 7.20 | ||||
273 168 | 6 | 168.3 | 4.5 | 7.40 | ||||
273 219 | 8 | 219.1 | 6.3 | 7.55 | ||||
323 168 | 12 | 323.9 | 7.1 | 6 | 168.3 | 4.5 | 203 | 11.00 |
323 219 | 8 | 219.1 | 6.3 | 11.10 | ||||
323 273 | 10 | 273 | 6.3 | 11.20 |
NPS Of Equal Tee | Outside Daimeter (O.D.) at bevel | Center-to-End | |
---|---|---|---|
(C) Run | (M) Outlet | ||
1/2" | 21.3 | 25 | 25 |
3/4" | 26.7 | 29 | 29 |
1" | 33.4 | 38 | 38 |
1 1/4" | 42.2 | 48 | 48 |
1 1/2" | 48.3 | 57 | 57 |
2" | 60.3 | 64 | 64 |
2 1/2" | 73.0 | 76 | 76 |
3" | 88.9 | 86 | 86 |
3 1/2" | 101.6 | 95 | 95 |
4" | 114.3 | 105 | 105 |
5" | 141.3 | 124 | 124 |
6" | 168.3 | 143 | 143 |
8" | 219.1 | 178 | 178 |
10" | 273.0 | 216 | 216 |
12" | 323.8 | 254 | 254 |
14" | 355.6 | 279 | 279 |
16" | 406.4 | 305 | 305 |
18" | 457.0 | 343 | 343 |
20" | 508.0 | 381 | 381 |
22" | 559.0 | 419 | 419 |
24" | 610.0 | 432 | 432 |
Normal Pipe Size For (NPS) | O.D. For (Outside Daimeter) of barrel | Length Of (F) | Radius Of(R) | Diameter Of (G) | ||
---|---|---|---|---|---|---|
(Min.) | (Max.) | ASME B16.9 Long Pattern | ASME B16.9 Short Pattern | |||
1/2″ | 20.5 | 22.8 | 76 | 51 | 3 | 35 |
3/4″ | 25.9 | 28.1 | 76 | 51 | 3 | 43 |
1″ | 32.6 | 35.0 | 102 | 51 | 3 | 51 |
1 1/4″ | 41.4 | 43.6 | 102 | 51 | 5 | 64 |
1 1/2″ | 47.5 | 49.9 | 102 | 51 | 6 | 74 |
2″ | 59.5 | 62.4 | 152 | 64 | 8 | 92 |
2 1/2″ | 72.2 | 75.3 | 152 | 64 | 8 | 105 |
3″ | 88.1 | 91.3 | 152 | 64 | 10 | 127 |
3 1/2″ | 100.8 | 104.0 | 152 | 76 | 10 | 140 |
4″ | 113.5 | 116.7 | 152 | 76 | 11 | 157 |
5″ | 140.5 | 144.3 | 203 | 76 | 11 | 186 |
6″ | 167.5 | 171.3 | 203 | 89 | 13 | 216 |
8″ | 218.3 | 222.1 | 203 | 102 | 13 | 270 |
10″ | 272.3 | 277.2 | 254 | 127 | 13 | 324 |
12″ | 323.1 | 328.0 | 254 | 152 | 13 | 381 |
14″ | 354.8 | 359.9 | 305 | 152 | 13 | 413 |
16″ | 405.6 | 411.0 | 305 | 152 | 13 | 470 |
18″ | 456.0 | 462.0 | 305 | 152 | 13 | 533 |
20″ | 507.0 | 514.0 | 305 | 152 | 13 | 584 |
22″ | 558.0 | 565.0 | 305 | 152 | 13 | 641 |
24″ | 609.0 | 616.0 | 305 | 152 | 13 | 692 |
NPS Of Pipe Cap | O.D. (Outside Daimeter) Of D | Length Of (H) | Length Of (H1) |
1/2 | 21.3 | 25 | 25 |
3/4 | 26.7 | 25 | 25 |
1 | 33.4 | 38 | 38 |
1.1/4 | 42.2 | 38 | 38 |
1.1/2 | 48.3 | 38 | 38 |
2 | 60.3 | 38 | 44 |
2.1/2 | 73 | 38 | 51 |
3 | 88.9 | 51 | 64 |
3.1/2 | 101.6 | 64 | 76 |
4 | 114.3 | 64 | 76 |
5 | 141.3 | 76 | 89 |
6 | 168.3 | 89 | 102 |
8 | 219.1 | 102 | 127 |
10 | 273 | 127 | 152 |
12 | 323.8 | 152 | 178 |
14 | 355.6 | 165 | 191 |
16 | 406.4 | 178 | 203 |
18 | 457 | 203 | 229 |
20 | 508 | 229 | 254 |
22 | 559 | 254 | 254 |
24 | 610 | 267 | 305 |
26 | 660 | 267 | … |
28 | 711 | 267 | … |
30 | 762 | 267 | … |
32 | 813 | 267 | … |
34 | 864 | 237 | … |
36 | 914 | 267 | … |
38 | 965 | 305 | … |
40 | 1016 | 305 | … |
42 | 1067 | 305 | … |
44 | 1118 | 343 | … |
46 | 1168 | 343 | … |
48 | 1219 | 343 | … |
Normal Size Of Pipe | Outside Dai Of (D) | 90 degree (Long Radius) Center-to-End (A) | 45 degree (Long Radius) Center-to-End (B) | 90 degree (3D) Center-to-End (A) | 45 degree (3D) Center-to-End (B) |
1/2 | 21.3 | 38 | 16 | – | – |
3/4 | 26.7 | 38 | 19 | 57 | 24 |
1 | 33.4 | 38 | 22 | 76 | 31 |
1¼ | 42.2 | 48 | 25 | 95 | 39 |
1½ | 48.3 | 57 | 29 | 114 | 47 |
2 | 60.3 | 76 | 35 | 152 | 63 |
2½ | 73 | 95 | 44 | 190 | 79 |
3 | 88.9 | 114 | 51 | 229 | 95 |
3½ | 101.6 | 133 | 57 | 267 | 111 |
4 | 114.3 | 152 | 64 | 305 | 127 |
5 | 141.3 | 190 | 79 | 381 | 157 |
6 | 168.3 | 229 | 95 | 457 | 189 |
8 | 219.1 | 305 | 127 | 610 | 252 |
10 | 273 | 381 | 159 | 762 | 316 |
12 | 323.8 | 457 | 190 | 914 | 378 |
14 | 355.6 | 533 | 222 | 1067 | 441 |
16 | 406.4 | 610 | 254 | 1219 | 505 |
18 | 457 | 686 | 286 | 1372 | 568 |
20 | 508 | 762 | 318 | 1524 | 632 |
22 | 559 | 838 | 343 | 1676 | 694 |
24 | 610 | 914 | 381 | 1829 | 757 |
26 | 660 | 991 | 406 | 1981 | 821 |
28 | 711 | 1067 | 438 | 2134 | 883 |
30 | 762 | 1143 | 470 | 2286 | 964 |
32 | 813 | 1219 | 502 | 2438 | 1010 |
34 | 864 | 1295 | 533 | 2591 | 1073 |
36 | 914 | 1372 | 565 | 2743 | 1135 |
38 | 965 | 1448 | 600 | 2896 | 1200 |
40 | 1016 | 1524 | 632 | 3048 | 1264 |
42 | 1067 | 1600 | 660 | 3200 | 1326 |
44 | 1118 | 1676 | 695 | 3353 | 1389 |
46 | 1168 | 1753 | 727 | 3505 | 1453 |
48 | 1219 | 1829 | 759 | 3658 | 1516 |
Yield Strength, min. | ||
---|---|---|
Grade | Ksi | MPa |
Titanium Grade 2 Pipe Fittings | 40 | 275 |
Tensile Strength, min. | ||
---|---|---|
Grade | ksi | MPa |
Titanium Grade 2 Pipe Fittings | 40 | 275 |
Standard Specification Of | Titanium Pipe Fittings |
---|---|
Grade | Titanium Grade 2 Pipe Fittings And Titanium Grade 5 Pipe Fittings |
Most Reliable Manufacturer Type Of Ti Fitting | Reducer/ Stub End/ Pipe Bend/ End Cap/ Elbow/ Tee |
Forging Methods | (1) ButtWeld, (2) Seamless, (3) Welded |
Manufacturer Size Range | 1/2" Inch To 18" Inch |
Schedule | SCH 10/ SCH 40/ SCH 80/ SCH 120/ SCH 160/ SCH 180 |
Dimensions & Standard | ASME/ANSI B16.9/ EN/ JIS/ DIN/ ASME B16.28/ MSS-SP-43/ ASME/ANSI B16.11 |
Pressure Class | Class 150 To Class 300 |
Type Of Connection | Threaded/ Forging/ Clamp End / Weld/ End Bell |
Chemical Composition | (C≤0.10), (Fe≤0.30), Pb (Ti: balance) Etc. |
Elongation | 20 % |
---|
Hardness | 160–180 HV |
---|
Proof Stress | ||
---|---|---|
Grade | ksi | 275 |
Titanium Grade 2 | 55 | 380 |
Tolerance Of Titanium Pipe Fittings | |||||||
All Type Of Buttweld Fitting | 45 deg & 90 deg elbows | 180 Degree Returns | |||||
Normal Size Of Pipe (NPS) | Outside Daimeter (O.D.) at Bevel | I.D. (Inside Daimeter) at End | Thickness Of Wall (WT) t / t1 | Center to End Daimeter A-B-C-M | Center to Center Daimeter (O) | Back to Face Daimeter (K) | Align- ment of Ends (U) |
1/2 a 2 1/2 | 1 | 0,8 | Not | 2 | 7 | 7 | 1 |
3 a 3 1/2 | 1 | 1,6 | less | 2 | 7 | 7 | 1 |
4 | +2 -1 | 1,6 | than | 2 | 7 | 7 | 1 |
5 a 6 | +3 -1 | 1,6 | 87,50% | 2 | 7 | 7 | 1 |
8 | 2 | 1,6 | of nominal | 2 | 7 | 7 | 1 |
10 | +4 -3 | 3,2 | tickness | 2 | 7 | 7 | 2 |
12 a 18 | +4 -3 | 3,2 | 3 | 10 | 7 | 2 | |
20 a 24 | +6 -5 | 4,8 | 3 | 10 | 7 | 2 | |
26 a 30 | +7 -5 | 4,8 | 3 | - | - | - | - |
32 a 48 | +7 -5 | 4,8 | 5 | - | - | - | - |
O.D. (Outside Daimeter) And I.D. (Inside Daimeter) | Equivalent List | Diameter Of Nominal Pipe | Threads Size In Inches |
5/16 | 0.313 | 1/16 | 27 |
13/32 | 0.405 | 1/8 | 27 |
35/64 | 0.540 | 1/4 | 18 |
43/64 | 0.675 | 3/8 | 18 |
27/32 | 0.840 | 1/2 | 14 |
1-3/64 | 1.050 | 3/4 | 14 |
1-5/16 | 1.315 | 1 | 11-1/2 |
1-21/32 | 1.660 | 1-1/4 | 11-1/2 |
1-29/32 | 1.900 | 1-1/2 | 11-1/2 |
2-3/8 | 2.375 | 2 | 11-1/2 |
2-7/8 | 2.875 | 2-1/2 | 8 |
3-1/2 | 3.500 | 3 | 8 |
4 | 4.000 | 3-1/2 | 8 |
4-1/2 | 4.500 | 4 | 8 |
Size | NPS | Daimeter Of Socket Weld Bore (B) | Bore Diameter of Socket Weld Fitting(2) D | Socket Wall (Thickness1) C | Body Thickness G | Depth of Socket Weld Fitting (Minimum) (J) | |||||
---|---|---|---|---|---|---|---|---|---|---|---|
Class Fitting Designation | Class Fitting Designation | ||||||||||
Designation | Class 3000# | Class 6000# | Class 3000# | Class 6000# | |||||||
Class 3000 | Class 6000 | Available | (Min.) | Available | (Min.) | (Min.) | (Min.) | ||||
6 | 1/8 | 11.2 10.8 | 7.6 6.1 | 7.6 6.1 | 3.18 | 3.18 | 3.96 | 3.43 | 2.41 | 3.15 | 9.5 |
8 | 1/4 | 14.6 14.2 | 10.0 8.5 | 10.0 8.5 | 3.78 | 3.30 | 4.60 | 4.01 | 3.02 | 3.68 | 9.5 |
10 | 3/8 | 18 17.6 | 13.3 11.8 | 13.3 11.8 | 4.01 | 3.50 | 5.03 | 4.37 | 3.20 | 4.01 | 9.5 |
15 | 1/2 | 22.2 21.8 | 16.6 15.0 | 16.6 15.0 | 4.67 | 4.09 | 5.97 | 5.18 | 3.73 | 4.78 | 9.5 |
20 | 3/4 | 27.6 27.2 | 21.7 20.2 | 21.7 20.2 | 4.90 | 4.27 | 6.96 | 6.04 | 3.91 | 5.56 | 12.5 |
25 | 1 | 34.3 33.9 | 27.4 25.9 | 27.4 25.9 | 5.69 | 4.98 | 7.92 | 6.93 | 4.55 | 6.35 | 12.5 |
32 | 1-1/4 | 43.1 42.7 | 35.8 34.3 | 35.8 34.3 | 6.07 | 5.28 | 7.92 | 6.93 | 4.85 | 6.35 | 12.5 |
40 | 1-1/2 | 49.2 48.8 | 41.6 40.1 | 41.6 40.1 | 6.35 | 5.54 | 8.92 | 7.80 | 5.08 | 7.14 | 12.5 |
50 | 2 | 61.7 61.2 | 53.3 51.7 | 53.3 51.7 | 6.93 | 6.04 | 10.92 | 9.50 | 5.54 | 8.74 | 16.0 |
65 | 2-1/2 | 74.4 73.9 | 64.2 61.2 | 64.2 61.2 | 8.76 | 7.67 | 7.01 | 16.0 | |||
80 | 3 | 90.3 89.8 | 79.4 76.4 | 79.4 76.4 | 9.52 | 8.30 | 7.62 | 16.0 | |||
100 | 4 | 115.7 115.2 | 103.8 100.7 | 103.8 100.7 | 10.69 | 9.35 | 8.56 | 16.0 |
Titanium Elbow
Titanium Reducing Tee
Ti Stub End
Titanium Reducer
Titanium End Cap
Titanium Pipe Bend
Titanium 90 Degree Elbow
Titanium Weldolet
Titanium Pipe Corss
Pressure ratings (psig) | |||||
---|---|---|---|---|---|
Pipe Fittings Temperature Ratings | Type Of Pressure Class | ||||
150 LBS | 300 LBS | ||||
1/4 - 1 Inches | 1 1/4 - 2 Inches | 2 1/2 - 3 Inches | |||
(oF) | (oC) | ||||
-20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
200 | 93 | 265 | 1785 | 1350 | 910 |
250 | 121 | 225 | 1575 | 1200 | 825 |
300 | 149 | 185 | 1360 | 1050 | 735 |
350 | 177 | 150 | 1150 | 900 | 650 |
400 | 204 | - | 935 | 750 | 560 |
450 | 232 | - | 725 | 600 | 475 |
500 | 260 | - | 510 | 450 | 385 |
550 | 288 | - | 300 | 300 | 300 |
Titanium Grade 1 | (w.t %:) (≤0.10), Fe (≤0.20), (Ti): balance, (H) ≤0.0125, N (≤0.05), O≤0.18, (Residuals): (each) ≤0.10, (total) ≤0.40. |
---|---|
Titanium Grade 2 | (w.t %:) (≤0.10), Fe (≤0.30), (Ti): balance, (H) ≤0.0125, N (≤0.05), O≤0.25, (Residuals): (each) ≤0.10, (total) ≤0.40. |
Titanium Grade 4 | (w.t %:) (≤0.10), Fe (≤0.50), (Ti): balance, (H) ≤0.0125, N (≤0.07), O≤0.40, (Residuals): (each) ≤0.10, (total) ≤0.40. |
Titanium Grade 5 | (w.t %:) Al:5.5~6.75, (≤0.10), Fe (≤0.40), (Ti): balance, (H) ≤0.0125, N (≤0.05), O≤0.20, V:3.5~4.5, (Residuals): (each) ≤0.10, (total) ≤0.40. |
Titanium Grade 7 | (w.t %:) (≤0.10), Fe (≤0.30), (Ti): balance, (H) ≤0.0125, N (≤0.05), O≤0.25, Pd:0.12~0.25, (Residuals): (each) ≤0.10, (total) ≤0.40. |
Titanium And Ti Alloy | Tensile Strength, (minimum) | Yield Strength, (minimum) | Hardness | Elongation | ||
---|---|---|---|---|---|---|
Titanium Grade | ksi | MPa | ksi | MPa | - | min. % |
Grade 1 | 35 | 240 | 25 | 170 | 140~160 HV | 24 |
Grade 2 | 50 | 345 | 40 | 275 | 160–180 HV | 20 |
Grade 4 | 80 | 550 | 70 | 483 | 200–220 HV | 15 |
Grade 5*Class A | 130 | 895 | 120 | 828 | 30–39 HRC | 10 |
Grade 5*Class B | 130 | 895 | 120 | 828 | 30–39 HRC | 10 |
Grade 7 | 50 | 345 | 40 | 275 | 160–180 HV | 20 |
+91-9987870874
info@fastwell.in
Shop No. 17/B1, Ground Floor Abbas Bldg. Wing A, Jalbhai Street, Near Cama Baug Khetwadi, Grant Road (E) Mumbai – 400004. India