Pipe fittings are made up of various metals and alloys stainless steel being one of the most common ones. ASTM A815 Duplex 2205 Pipe Fittings is one such type of fitting used to connect pipes that are made up of both ferritic and austenitic microstructure. 2205 Duplex Stainless Steel Fittings offers good impact toughness and high strength. Duplex Pipe Fittings manufacturer In India recommend these fittings due to their resistance to local corrosion attacks such as pitting and crevice. It is not advisable to use these fittings above the temperature of 572 degrees F. UNS S31803 Buttweld Tee are used to connect 3 pipes and offer superior corrosion resistance when compared to other grades.
Even after exposure to acidic and oxidizing solutions these Duplex Steel Elbows still resist local corrosion due to the presence of chromium, molybdenum, and nitrogen. 2205 Duplex Fittings can be used in storage tanks, heat exchangers, pressure vessels, and oil and gas processing. These fittings are also used in the shipping and food processing industry. Werkstoff No 1.4462 Pipe Reducer can also resist chlorine ion stress corrosion and is used in shafts, impellers, blades, and press roll. These fittings are characterized by high yield strength. These fittings, unlike ordinary steel, avoid deformities and corrosion cracking even under high temperatures.
Duplex Steel Fittings is also used in terminating connections as it can resist intergranular corrosion. These fittings are used in brewer tanks, desalination, and boiler manufacturing. ASTM A815 DSS Seamless Fittings are said to be cost efficient as they have a lower cost of manufacturing due to the lower alloying elements. These fittings also display elasticity and toxic resistance due to which Alloy 2205 Stub End is used in gas desulfurization plants as well. We have been supplying these fittings to all such industries and their durability and long life has reduced the customer's maintenance and repair cost as well. This is because we make them using good quality raw material and pass them through several checks.
Type Of Fittings | Size | SCH | Material | Price In INR (India) Per Piece |
---|---|---|---|---|
Duplex Steel Tee | 1/2" | Schedule 40 | - | 90.00 |
Equal Tee | 3/4" | Schedule 40 | - | 130.00 |
Equal Tee | 3/1" | Schedule 40 | - | 180.00 |
Equal Tee | 2" | Schedule 40 | - | 250.00 |
Equal Tee | 3" | Schedule 40 | - | 350.00 |
Equal Tee | 4" | Schedule 40 | - | 434.00 |
Duplex Steel Elbow | 3/4" | SCH 40 | Duplex Steel | 150.00 |
90 Deg Elbow | 1" | SCH 40 | - | 250.00 |
90 Deg Elbow | 2" | SCH 40 | - | 287.00 |
90 Deg Elbow | 3" | SCH 40 | - | 356.00 |
90 Deg Elbow | 4" | SCH 40 | - | 478.00 |
90 Deg Elbow | 5" | SCH 40 | - | 599.00 |
90 Deg Elbow | 6" | SCH 40 | - | 689.00 |
Duplex Steel Reducer | 3/4 X 1/2 | SCH 160 | - | 120.00 |
Concentric Reducer | 1 X 1/2" | SCH 160 | - | 187.00 |
Concentric Reducer | 4 X 2" | SCH 160 | - | 345.00 |
Concentric Reducer | 5 X 4" | SCH 40 | - | 456.00 |
Concentric Reducer | 6 X 4" | SCH 80 | - | 657.00 |
Duplex Steel End Cap | 1/2" | Schedule 40 | - | 150.00 |
End Cap | 3/4" | Schedule 40 | - | 246.00 |
End Cap | 1" | Schedule 40 | - | 289.00 |
End Cap | 1 1/4" | Schedule 40 | - | 357.00 |
End Cap | 2" | Schedule 40 | Duplex Steel | 469.00 |
Most Reliable Manufacturer Of Duplex Pipe Fittings In India. For final 2205 Duplex Fittings Price List Please Call on +91-9987870874 or drop an Email to info@fastwell.in.
Specification | Duplex Pipe Fittings |
---|---|
Chemical Composition | Carbon (≤0.03), Manganese (≤2.00), Silicon (≤1.00), Phosphate (≤0.03) Etc. |
Hardness | 25C |
Pressure Class | Class 150/ Class 300/ Class 600 |
Forging Methods | Seamless/ ButtWeld/ Welded |
Size | 1/2" To 48" |
Two Grade Of Duplex Steel Fitting | UNS S32205 Fitting And UNS S31803 Fitting |
Size Of SMLS Fitting | 1/2" - 16" Inch |
Welded Fitting Size | 1/2" To 24" Inch |
Thickness | SCH 10/ SCH 40/ SCH 80/ SCH 120/ SCH 160/ SCH 180 |
We Manufacturer Common Type Of 2205 Duplex Fittings | Stub End/ Pipe Bend/ End Cap/ Elbow/ Tee/ Reducer |
Standard | DIN/ EN/ JIS/ ASME/ANSI B16.11/ ASME B16.28/ MSS-SP-43/ ASME/ANSI B16.9 |
Connection Type | Clamp End / Threaded/ Forging/ Weld/ End Bell |
UNS S31803 Fittings
UNS S32205 Fittings
Normal Pipe Size For (NPS) | Outside Daimeter For (O.D.) | Buttweld 90 Deg Elbow | Buttweld 45 Deg Elbow | Buttweld Return 180 Deg Elbow | ||||
---|---|---|---|---|---|---|---|---|
(In Inches) | Buttweld LR Elbow | Buttweld SR Elbow | Buttweld LR Elbow | Buttweld LR Elbow | ||||
(MM/ millimeter) | (Inches/ inch.) | Center to Face (In Inch) | Center to Face (In Inch) | Center to Face (In Inch) | Radius (In Inch) | Center to Center (In Inch) | Back to face (In Inch) | |
1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
Normal Pipe Size For (NPS) | Outside Daimeter For (O.D.) | ASME/ANSI B16.9 BW End Cap | ASME/ANSI B16.9 BW Straight Tee | ASME/ANSI B16.9 BW Straight Cross | ASME B16.9 BW Stub Ends | |||
---|---|---|---|---|---|---|---|---|
(Inches/ inch.) | (MM/ millimeter) | (Inch.) | Length (Inch.) | Center to End (Inch.) | Center to End (Inch.) | Lap Diameter (Inch.) | Long Length (Inch.) | Short Length (Inch.) |
1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Normal Pipe Size For (NPS) For ANSI/ASME B16.9 | 10S Schedule | 40S Schedule | 80S Schedule | ||||||
Buttweld 90 Degree Elbow | Buttweld 45 Degree Elbow | B16.9 Buttweld Equal Tee | Buttweld 90 Deg Elbows | Buttweld 45 Deg Elbows | B16.9 Buttweld Equal Tee | Buttweld 90 Degree Elbow | Buttweld 45 Degree Elbow | ASME B16.9 Buttweld Equal Tee | |
8 | 0.02 | 0.01 | 0.03 | 0.03 | 0.02 | 0.06 | 0.04 | 0.03 | 0.07 |
10 | 0.03 | 0.02 | 0.05 | 0.03 | 0.02 | 0.03 | 0.06 | 0.04 | 0.09 |
15 | 0.06 | 0.03 | 0.09 | 0.08 | 0.04 | 0.10 | 0.10 | 0.05 | 0.14 |
20 | 0.07 | 0.03 | 0.13 | 0.08 | 0.04 | 0.17 | 0.11 | 0.05 | 0.20 |
25 | 0.14 | 0.08 | 0.28 | 0.15 | 0.11 | 0.29 | 0.22 | 0.14 | 0.38 |
32 | 0.23 | 0.11 | 0.49 | 0.26 | 0.17 | 0.59 | 0.40 | 0.23 | 0.68 |
40 | 0.30 | 0.17 | 0.68 | 0.40 | 0.23 | 0.86 | 0.51 | 0.29 | 1.02 |
50 | 0.50 | 0.25 | 0.85 | 0.70 | 0.4 | 1.28 | 0.91 | 0.59 | 1.59 |
65 | 0.85 | 0.48 | 1.41 | 1.40 | 0.77 | 2.19 | 1.81 | 0.99 | 3.13 |
80 | 1.25 | 0.63 | 1.77 | 2.20 | 1.08 | 3.31 | 2.97 | 1.50 | 4.45 |
90 | 1.70 | 0.75 | 2.67 | 2.83 | 1.42 | 4.08 | 4.00 | 2.00 | 5.44 |
100 | 2.10 | 1.08 | 3.46 | 4.47 | 2.09 | 5.27 | 6.18 | 2.81 | 7.71 |
150 | 5.45 | 2.72 | 8.07 | 10.89 | 5.44 | 10.99 | 16.32 | 8.16 | 13.61 |
200 | 10.20 | 5.33 | 15.65 | 21.54 | 10.77 | 20.91 | 33.11 | 16.56 | 28.12 |
250 | 18.15 | 9.75 | 26.46 | 38.56 | 19.27 | 35.38 | 51.71 | 25.86 | 49.90 |
300 | 25.80 | 13.62 | 39.46 | 59.42 | 29.71 | 62.14 | 79.38 | 39.69 | 83.91 |
Normal Pipe Size For (NPS) For ANSI/ ASME B16.9 | 10S Schedule | 40S Schedule | 80S Schedule | ||||||
Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | |
40x.25 | 0.19 | 0.19 | 0.60 | 0.26 | 0.26 | 0.76 | 0.34 | 0.34 | 0.90 |
50x25 | 0.28 | 0.28 | 0.73 | 0.40 | 0.40 | 1.10 | 0.54 | 0.54 | 1.37 |
50x40 | 0.31 | 0.31 | 0.76 | 0.45 | 0.45 | 1.15 | 0.59 | 0.59 | 1.43 |
80x.50 | 0.55 | 0.55 | 1.56 | 1.00 | 1.00 | 2.91 | 1.79 | 1.79 | 3.91 |
100x50 | 0.78 | 0.78 | 2.94 | 1.50 | 1.50 | 4.48 | 1.95 | 1.95 | 6.55 |
100x80 | 0.87 | 0.87 | 3.04 | 1.74 | 1.74 | 4.64 | 2.33 | 2.33 | 6.79 |
150x80 | 1.82 | 1.82 | 6.86 | 3.95 | 3.95 | 9.68 | 5.51 | 5.51 | 11.57 |
150x100 | 1.96 | 1.96 | 7.10 | 4.07 | 4.07 | 11.94 | 5.96 | 5.96 | 11.97 |
200x100 | 3.01 | 3.01 | 13.46 | 6.55 | 6.55 | 17.98 | 9.23 | 9.23 | 24.18 |
200x150 | 3.19 | 3.19 | 14.08 | 6.74 | 6.74 | 18.82 | 10.12 | 10.12 | 25.31 |
Tolerance Of Duplex Pipe Fittings | |||||||
All Type Of Buttweld Fitting | 45 deg & 90 deg elbows | 180 Degree Returns | |||||
Normal Size Of Pipe (NPS) | Outside Daimeter (O.D.) at Bevel | I.D. (Inside Daimeter) at End | Thickness Of Wall (WT) t / t1 | Center to End Daimeter A-B-C-M | Center to Center Daimeter (O) | Back to Face Daimeter (K) | Align- ment of Ends (U) |
1/2 a 2 1/2 | 1 | 0,8 | Not | 2 | 7 | 7 | 1 |
3 a 3 1/2 | 1 | 1,6 | less | 2 | 7 | 7 | 1 |
4 | +2 -1 | 1,6 | than | 2 | 7 | 7 | 1 |
5 a 6 | +3 -1 | 1,6 | 87,50% | 2 | 7 | 7 | 1 |
8 | 2 | 1,6 | of nominal | 2 | 7 | 7 | 1 |
10 | +4 -3 | 3,2 | tickness | 2 | 7 | 7 | 2 |
12 a 18 | +4 -3 | 3,2 | 3 | 10 | 7 | 2 | |
20 a 24 | +6 -5 | 4,8 | 3 | 10 | 7 | 2 | |
26 a 30 | +7 -5 | 4,8 | 3 | - | - | - | - |
32 a 48 | +7 -5 | 4,8 | 5 | - | - | - | - |
Duplex Steel Plug
Duplex Steel Swage Nipple
Duplex Steel Bushing
UNS S32205 Coupling
ASTM A815 Duplex Steel Nipples
2205 Duplex Steel Union
Normal Size Of Pipe | Outside Dai Of (D) | 90 degree (Long Radius) Center-to-End (A) | 45 degree (Long Radius) Center-to-End (B) | 90 degree (3D) Center-to-End (A) | 45 degree (3D) Center-to-End (B) |
1/2 | 21.3 | 38 | 16 | – | – |
3/4 | 26.7 | 38 | 19 | 57 | 24 |
1 | 33.4 | 38 | 22 | 76 | 31 |
1¼ | 42.2 | 48 | 25 | 95 | 39 |
1½ | 48.3 | 57 | 29 | 114 | 47 |
2 | 60.3 | 76 | 35 | 152 | 63 |
2½ | 73 | 95 | 44 | 190 | 79 |
3 | 88.9 | 114 | 51 | 229 | 95 |
3½ | 101.6 | 133 | 57 | 267 | 111 |
4 | 114.3 | 152 | 64 | 305 | 127 |
5 | 141.3 | 190 | 79 | 381 | 157 |
6 | 168.3 | 229 | 95 | 457 | 189 |
8 | 219.1 | 305 | 127 | 610 | 252 |
10 | 273 | 381 | 159 | 762 | 316 |
12 | 323.8 | 457 | 190 | 914 | 378 |
14 | 355.6 | 533 | 222 | 1067 | 441 |
16 | 406.4 | 610 | 254 | 1219 | 505 |
18 | 457 | 686 | 286 | 1372 | 568 |
20 | 508 | 762 | 318 | 1524 | 632 |
22 | 559 | 838 | 343 | 1676 | 694 |
24 | 610 | 914 | 381 | 1829 | 757 |
26 | 660 | 991 | 406 | 1981 | 821 |
28 | 711 | 1067 | 438 | 2134 | 883 |
30 | 762 | 1143 | 470 | 2286 | 964 |
32 | 813 | 1219 | 502 | 2438 | 1010 |
34 | 864 | 1295 | 533 | 2591 | 1073 |
36 | 914 | 1372 | 565 | 2743 | 1135 |
38 | 965 | 1448 | 600 | 2896 | 1200 |
40 | 1016 | 1524 | 632 | 3048 | 1264 |
42 | 1067 | 1600 | 660 | 3200 | 1326 |
44 | 1118 | 1676 | 695 | 3353 | 1389 |
46 | 1168 | 1753 | 727 | 3505 | 1453 |
48 | 1219 | 1829 | 759 | 3658 | 1516 |
2205 Duplex Pipe Fittings Chemical Composition | |
---|---|
Silicon | ≤1.00 |
Phosphate | ≤0.03 |
Sulfur | ≤0.02 |
Carbon | ≤0.03 |
Molybdenum | 2.5-3.5 |
Nitrogen | 0.08-0.2 |
Manganese | ≤2.00 |
Chromium | 21.0-23.0 |
Nickel | 4.5-6.5 |
O.D. (Outside Daimeter) And I.D. (Inside Daimeter) | Equivalent List | Diameter Of Nominal Pipe | Threads Size In Inches |
5/16 | 0.313 | 1/16 | 27 |
13/32 | 0.405 | 1/8 | 27 |
35/64 |
0.540 |
1/4 | 18 |
43/64 | 0.675 | 3/8 | 18 |
27/32 | 0.840 | 1/2 | 14 |
1-3/64 | 1.050 | 3/4 | 14 |
1-5/16 | 1.315 | 1 | 11-1/2 |
1-21/32 |
1.660 | 1-1/4 | 11-1/2 |
1-29/32 | 1.900 | 1-1/2 | 11-1/2 |
2-3/8 | 2.375 | 2 | 11-1/2 |
2-7/8 | 2.875 | 2-1/2 | 8 |
3-1/2 | 3.500 | 3 | 8 |
4 | 4.000 | 3-1/2 | 8 |
4-1/2 | 4.500 | 4 | 8 |
Duplex Pipe Fittings
Brazil, South Africa, Kuwait, Saudi Arabia (KSA)
Duplex 2205 Pipe Fittings
Turkey, Nigeria, Australia, Egypt, UK, Belgium
S32750 Duplex Pipe Fitting
Hong Kong, Oman, Mexico, Spain, Poland, Japan
2205 Duplex Stainless Steel Fitting
Italy, Iran, Canada, Chile, Singapore, China
2205 Duplex Fittings
Europe, United Kingdom -UK, Malaysia, UAE
Duplex Steel Pipe Fittings
Dammam -KSA, Philippines, Indonesia
Duplex Steel Buttweld Fitting
France, Thailand, Qatar, Europe
Duplex SS Fitting
Germany, USA, Bangladesh, Finland
NPS Of Equal Tee | Outside Daimeter (O.D.) at bevel | Center-to-End | |
---|---|---|---|
(C) Run | (M) Outlet | ||
1/2" | 21.3 | 25 | 25 |
3/4" | 26.7 | 29 | 29 |
1" | 33.4 | 38 | 38 |
1 1/4" | 42.2 | 48 | 48 |
1 1/2" | 48.3 | 57 | 57 |
2" | 60.3 | 64 | 64 |
2 1/2" | 73.0 | 76 | 76 |
3" | 88.9 | 86 | 86 |
3 1/2" | 101.6 | 95 | 95 |
4" | 114.3 | 105 | 105 |
5" | 141.3 | 124 | 124 |
6" | 168.3 | 143 | 143 |
8" | 219.1 | 178 | 178 |
10" | 273.0 | 216 | 216 |
12" | 323.8 | 254 | 254 |
14" | 355.6 | 279 | 279 |
16" | 406.4 | 305 | 305 |
18" | 457.0 | 343 | 343 |
20" | 508.0 | 381 | 381 |
22" | 559.0 | 419 | 419 |
24" | 610.0 | 432 | 432 |
Yield Strength | Tensile Strength | Elongation | Rockwell | Charpy V-Notch Impact | |
---|---|---|---|---|---|
ksi.(Mpa) | ksi. (Mpa) | % | Hardness | mm-N/mm2 | mm-N/mm2 |
90(621) | 125(862) | 28 | 25C | 1310 | 844 |
NPS Of Pipe Cap | O.D. (Outside Daimeter) Of D | Length Of (H) | Length Of (H1) |
1/2 | 21.3 | 25 | 25 |
3/4 | 26.7 | 25 | 25 |
1 | 33.4 | 38 | 38 |
1.1/4 | 42.2 | 38 | 38 |
1.1/2 | 48.3 | 38 | 38 |
2 | 60.3 | 38 | 44 |
2.1/2 | 73 | 38 | 51 |
3 | 88.9 | 51 | 64 |
3.1/2 | 101.6 | 64 | 76 |
4 | 114.3 | 64 | 76 |
5 | 141.3 | 76 | 89 |
6 | 168.3 | 89 | 102 |
8 | 219.1 | 102 | 127 |
10 | 273 | 127 | 152 |
12 | 323.8 | 152 | 178 |
14 | 355.6 | 165 | 191 |
16 | 406.4 | 178 | 203 |
18 | 457 | 203 | 229 |
20 | 508 | 229 | 254 |
22 | 559 | 254 | 254 |
24 | 610 | 267 | 305 |
26 | 660 | 267 | … |
28 | 711 | 267 | … |
30 | 762 | 267 | … |
32 | 813 | 267 | … |
34 | 864 | 237 | … |
36 | 914 | 267 | … |
38 | 965 | 305 | … |
40 | 1016 | 305 | … |
42 | 1067 | 305 | … |
44 | 1118 | 343 | … |
46 | 1168 | 343 | … |
48 | 1219 | 343 | … |
UNS S32205 Reducing Tee
ASTM A815 Duplex Long Radius Elbow
Duplex Steel Equal Tee
Duplex Steel 90 Degree Elbow
Duplex Steel Concentric Reducer
ASTM A815 DSS Lon Stub End
Duplex Steel Elbow
UNS S32205 Tee
UNS S32205 Stub End
Duplex 31803 Reducer
Duplex Steel S32205 End Cap
2205 Buttweld Bend
Duplex 31803 Con Reducer
ASTM A815 Duplex 2205 Weldolet
ASTM A815 DSS Pipe Corss
Tensile Strength (ksi.(Mpa)) | 125(862) |
---|
Yield Strength (ksi. (Mpa)) | 90(621) |
---|
Grade | C | Mn | Ni | N | Fe | Si | P | S | Cr | Mo |
Duplex S32205 Fittings | 0.030 max. | 2.00 max. | 4.50 – 6.50 | 0.8 – 0.20 | 63.54 min. | 1.00 max. | 0.030 max. | 0.020 max. | 21.0 – 23.0 | 2.50 - 3.50 |
Grade | Melting Point | Tensile Strength | Density | Yield Strength (0.2%Offset) | Elongation |
Duplex S32205 Fittings | 1350 °C (2460 °F) | 15 % | 7.8 g/cm3 | Psi – 116000 , MPa – 800 | Psi – 80000 , MPa – 550 |
RCD Reiso Code | BIG Ø | SMALL Ø | Hight (H) MM | Theoretical Weight In KG (Kilogram) | ||||
---|---|---|---|---|---|---|---|---|
(DN) | (D) MM | Thickness Of (S) In MM. | (DN) | (D) MM | Thickness Of (S) MM | |||
27 21 | 3/4 | 26.9 | 2.3 | 1/2 | 21.3 | 2.0 | 38 | 0.08 |
33 21 | 1 | 33.7 | 2.6 | 1/2 | 21.3 | 2.0 | 50 | 0.09 |
33 27 | 3/4 | 26.9 | 2.3 | 0.09 | ||||
42 21 | 1"1/4 | 42.4 | 2.6 | 1/2 | 21.3 | 2.0 | 50 | 0.12 |
42 27 | 3/4 | 26.9 | 2.3 | 0.13 | ||||
42 33 | 1 | 33.7 | 2.6 | 0.14 | ||||
*48 21 | 1"1/2 | 48.3 | 2.6 | 1/2 | 21.3 | 2.0 | 64 | 0.18 |
48 27 | 3/4 | 26.9 | 2.3 | 0.19 | ||||
48 33 | 1 | 33.7 | 2.6 | 0.20 | ||||
48 42 | 1"1/4 | 42.4 | 2.6 | 0.20 | ||||
60 27 | 2 | 60.3 | 2.9 | 3/4 | 26.9 | 2.3 | 76 | 0.30 |
60 33 | 1 | 33.7 | 2.6 | 0.31 | ||||
60 42 | 1"1/4 | 42.4 | 2.6 | 0.32 | ||||
60 48 | 1"1/2 | 48.3 | 2.6 | 0.33 | ||||
76 33 | 2"1/2 | 76.1 | 2.9 | 1 | 33.7 | 2.6 | 90 | 0.40 |
76 42 | 1"1/4 | 42.4 | 2.6 | 0.47 | ||||
76 48 | 1"1/2 | 48.3 | 2.6 | 0.48 | ||||
76 60 | 2 | 60.3 | 2.6 | 0.49 | ||||
89 42 | 3 | 88.9 | 3.2 | 1"1/4 | 42.4 | 2.6 | 90 | 0.55 |
89 48 | 1"1/2 | 48.3 | 2.6 | 0.61 | ||||
89 60 | 2 | 60.3 | 2.9 | 0.62 | ||||
89 76 | 2"1/2 | 76.1 | 2.9 | 0.63 | ||||
114 48 | 4 | 114.3 | 3.6 | 1"1/2 | 48.3 | 2.6 | 100 | 0.85 |
114 60 | 2 | 60.3 | 2.9 | 0.98 | ||||
114 76 | 2"1/2 | 76.1 | 2.9 | 1.00 | ||||
114 89 | 3 | 88.9 | 3.2 | 1.02 | ||||
139 60 | 5 | 139.7 | 4.0 | 2 | 60.3 | 2.9 | 127 | 1.60 |
139 76 | 2"1/2 | 76.1 | 2.9 | 1.70 | ||||
139 89 | 3 | 88.9 | 3.2 | 1.74 | ||||
139 114 | 4 | 114.3 | 3.6 | 1.76 | ||||
*168 76 | 6 | 168.3 | 4.5 | 2"1/2 | 76.1 | 2.9 | 140 | 2.60 |
168 89 | 3 | 88.9 | 3.2 | 2.70 | ||||
168 114 | 4 | 114.3 | 3.6 | 2.82 | ||||
168 139 | 5 | 139.7 | 4.0 | 2.94 | ||||
219 114 | 8 | 219.1 | 6.3 | 4 | 114.3 | 3.6 | 152 | 5.03 |
219 139 | 5 | 139.7 | 4.0 | 5.12 | ||||
219 168 | 6 | 168.3 | 4.5 | 5.18 | ||||
*273 114 | 10 | 273.0 | 6.3 | 4 | 114.3 | 3.6 | 178 | 7.00 |
*273 139 | 5 | 139.7 | 4.0 | 7.20 | ||||
273 168 | 6 | 168.3 | 4.5 | 7.40 | ||||
273 219 | 8 | 219.1 | 6.3 | 7.55 | ||||
323 168 | 12 | 323.9 | 7.1 | 6 | 168.3 | 4.5 | 203 | 11.00 |
323 219 | 8 | 219.1 | 6.3 | 11.10 | ||||
323 273 | 10 | 273 | 6.3 | 11.20 |
Rockwell | Hardness | 25C |
---|
Normal Pipe Size For (NPS) | O.D. For (Outside Daimeter) of barrel | Length Of (F) | Radius Of(R) | Diameter Of (G) | ||
---|---|---|---|---|---|---|
(Min.) | (Max.) | ASME B16.9 Long Pattern | ASME B16.9 Short Pattern | |||
1/2″ | 20.5 | 22.8 | 76 | 51 | 3 | 35 |
3/4″ | 25.9 | 28.1 | 76 | 51 | 3 | 43 |
1″ | 32.6 | 35.0 | 102 | 51 | 3 | 51 |
1 1/4″ | 41.4 | 43.6 | 102 | 51 | 5 | 64 |
1 1/2″ | 47.5 | 49.9 | 102 | 51 | 6 | 74 |
2″ | 59.5 | 62.4 | 152 | 64 | 8 | 92 |
2 1/2″ | 72.2 | 75.3 | 152 | 64 | 8 | 105 |
3″ | 88.1 | 91.3 | 152 | 64 | 10 | 127 |
3 1/2″ | 100.8 | 104.0 | 152 | 76 | 10 | 140 |
4″ | 113.5 | 116.7 | 152 | 76 | 11 | 157 |
5″ | 140.5 | 144.3 | 203 | 76 | 11 | 186 |
6″ | 167.5 | 171.3 | 203 | 89 | 13 | 216 |
8″ | 218.3 | 222.1 | 203 | 102 | 13 | 270 |
10″ | 272.3 | 277.2 | 254 | 127 | 13 | 324 |
12″ | 323.1 | 328.0 | 254 | 152 | 13 | 381 |
14″ | 354.8 | 359.9 | 305 | 152 | 13 | 413 |
16″ | 405.6 | 411.0 | 305 | 152 | 13 | 470 |
18″ | 456.0 | 462.0 | 305 | 152 | 13 | 533 |
20″ | 507.0 | 514.0 | 305 | 152 | 13 | 584 |
22″ | 558.0 | 565.0 | 305 | 152 | 13 | 641 |
24″ | 609.0 | 616.0 | 305 | 152 | 13 | 692 |
ASTM A815 Duplex Pipe Fittings Can Be Readily Welded with GMAW/ GTAW/ Plasma/ SMAW Welding methods.
+91-9987870874
info@fastwell.in
Shop No. 17/B1, Ground Floor Abbas Bldg. Wing A, Jalbhai Street, Near Cama Baug Khetwadi, Grant Road (E) Mumbai – 400004. India