Super Duplex Pipe Fittings and UNS S32750/ S32760 Buttweld Elbow/ Tee

PED approved Super Duplex 2507 Pipe Fittings manufacturer in India, Find ASTM A815 wp-s UNS S32750/ S32760 Elbow and Tee updated Price in Mumbai

Stainless steel is commonly used in manufacturing various products in the market. One such type of fitting that is manufactured using a super duplex type of stainless steel is ASTM A815 Super Duplex 2507 Pipe Fittings. They are well known to resist chloride ion stress related corrosion cracking. These fittings offer high thermal conductivity with a low coefficient of thermal expansion. Alloy 2507 Elbow also resists crevice corrosion and pitting which are a type of localized corrosion. According to Super Duplex Pipe Fittings manufacturer In India, these fittings are said to have lower carbon content that reduces the risk of carbide precipitation that occurs in grain boundaries due to heat treatment.

Super Duplex Stainless Steel Pipe Fittings is used in oil and gas industries and also in wells with high brine levels that occur naturally or where brine solution has been injected to enhance recovery. UNS S32750 Seamless Tee offers resistance to erosion and fatigue along with high strength. These 2507 Super Duplex Stub End are also resistant to uniform corrosion that may occur due to the presence of organic acid such as formic or acetic acid. They also display high energy absorption and high thermal conductivity. S32760 Buttweld Reducer also offers good workability and weldability.

ASME SA815 Super Duplex Forged Fittings when applied in heat display lower distortion. However, in case of distortion occurs it leads to ill-fitted fittings or connections. These SAF 2507 End Cap is used in the petrochemical industry, chemical processing, oil and gas processing, and heat exchangers. We have been manufacturing these Super Duplex Steel S32750 & S32760 Welded Fittings using the best quality raw material and also pass these fittings through various destructive and non-destructive tests to ensure that they have inherited the required properties.

Table Of Content:

Specification List Of Super Duplex Fittings
Super Duplex Pipe Fittings Price List
Super Duplex 2507 Pipe Fittings Grade
ASME SA815 Super Duplex Elbow Dimensions
ANSI/ ASME B16.9 UNS S32750 Pipe Fittings Chemical Composition
Schedule 80 Super Duplex S32750 Fittings Mechanical Chart
How To Calculate ASTM A815 UNS S32750 Equal Tee Center?
Tensile Strength Of MSS SP-75 Super Duplex Stainless Steel Pipe Fittings
Yield Strength Of EN 10253 Super Duplex Stainless Steel Fittings
Super Duplex Buttweld Fittings Dimensions
How To Make A 2507 Super Duplex 90 Degree Elbow Out Of Pipe?
UNS S32760 Pipe Fittings Chemical Structure
1/2 to 48 Inch S32760 Super Duplex Fittings Mechanical Properties
Buy Super Duplex Pipe Fittings Best Price And Fast Delivery In India
Hardness Of Super Duplex Tube Fittings

Super Duplex Threaded Fittings Dimensions
BS1640 ASME SA815 Super Duplex Reducer Dimensions
Werkstoff No 1.4410 Fittings Size Chart
Application Of SAF 2507 Fittings
Super Duplex S32750 Socket Weld Fittings Dimensions As Per ASME B16.11
Types Of Super Duplex Forged Fittings
Weldability Of DIN 2605 Super Duplex Compression Fittings
How To Calculate Surface Area Of ASTM A815 UNS S32750 Concentric Reducer?
UNS S32750 Equal Tee Dimension
Super Duplex End Cap Dimensions In MM
Packaging Of Super Duplex Seamless Fittings
UNS S32760 Welded Fittings Standards
2507 Super Duplex Stub End Dimensions

Don't Forget To Check Schedule 40 Super Duplex Stainless Steel Pipe Fittings Specification And Weight Chart/ Chemical Composition, All Sizes Of MSS SP-75 UNS S32750 Seamless Tee supplier in Mumbai

Specification List Of Super Duplex Fittings

Manufacturer Specifications	Super Duplex Pipe Fittings
Tensile Strength	≥110（800）
Manufacturing Methods	ButtWeld Fitting/ Seamless Fitting/ Welded Fitting
Size Length	1/2"/ 3/4"/ 1"/ 2"/ 3"/ 4"/ 5"/ 6"/ 7"/ 8"/ 9"/ 10"/ 11"/ 12"/ 13"/ 14"/ 15"/ 16" To 32"
Available Pressure Rating	150# Fitting/ 300# Fitting/ 600# Fitting
Since 1997, We Have Been Manufacturer Grade Of Super Duplex 2507 Pipe Fittings	UNS S32750 Fitting And UNS S32760 Fitting
Chemical Chart	Silicon (≤0.80), Phosphate (≤0.035), Carbon (≤0.03), Manganese (≤1.2) Etc..
Hardness	≥32
Wall Thickness	Schedule 10S To Schedule 180.
Biggest Manufacturer Of Alloy 2507 Fitting Types	End Cap/ Elbow/ Tee/ Stub End/ Pipe Bend/ Reducer
Dimension	DIN/ ASME B16.28/ MSS-SP-43/ ASME/ANSI B16.9/ EN/ JIS/ ASME/ANSI B16.11

Super Duplex Pipe Fittings Price List

Type Of Fitting	Size	SCH	Material	Price In INR (India) Per Piece
Super Duplex Reducer	3/4 X 1/2	SCH 160	-	150.00
Concentric Reducer	1 X 1/2"	SCH 160	-	220.00
Concentric Reducer	4 X 2"	SCH 160	-	376.00
Concentric Reducer	5 X 4"	SCH 40	-	562.00
Concentric Reducer	6 X 4"	SCH 80	-	745.00
Super Duplex Elbow	3/4"	SCH 40	-	187.00
90 Deg Elbow	1"	SCH 40	-	324.00
90 Deg Elbow	2"	SCH 40	-	399.00
90 Deg Elbow	3"	SCH 40	-	489.00
90 Deg Elbow	4"	SCH 40	-	568.00
90 Deg Elbow	5"	SCH 40	-	689.00
90 Deg Elbow	6"	SCH 40	-	757.00
Super Duplex Tee	1/2"	Schedule 40	-	120.00
Equal Tee	3/4"	Schedule 40	-	160.00
Equal Tee	3/1"	Schedule 40	-	274.00
Equal Tee	2"	Schedule 40	-	383.00
Equal Tee	3"	Schedule 40	-	485.00
Equal Tee	4"	Schedule 40	-	558.00
Super Duplex End Cap	1/2"	Schedule 40	-	180.00
End Cap	3/4"	Schedule 40	-	354.00
End Cap	1"	Schedule 40	-	443.00
End Cap	1 1/4"	Schedule 40	-	587.00
End Cap	2"	Schedule 40	Super Duplex	632.00

We are one of the biggest Manufacturer Of Super Duplex Pipe Fittings In India. For final Super Duplex 2507 Pipe Fittings Price List Please Call on +91-9987870874 or drop an Email to info@fastwell.in.

Super Duplex 2507 Pipe Fittings Grade

UNS S32750 Fittings

UNS S32760 Fittings

ASME SA815 Super Duplex Elbow Dimensions

Normal Size Of Pipe	Outside Dai Of (D)	90 degree (Long Radius) Center-to-End (A)	45 degree (Long Radius) Center-to-End (B)	90 degree (3D) Center-to-End (A)	45 degree (3D) Center-to-End (B)
1/2	21.3	38	16	–	–
3/4	26.7	38	19	57	24
1	33.4	38	22	76	31
1¼	42.2	48	25	95	39
1½	48.3	57	29	114	47
2	60.3	76	35	152	63
2½	73	95	44	190	79
3	88.9	114	51	229	95
3½	101.6	133	57	267	111
4	114.3	152	64	305	127
5	141.3	190	79	381	157
6	168.3	229	95	457	189
8	219.1	305	127	610	252
10	273	381	159	762	316
12	323.8	457	190	914	378
14	355.6	533	222	1067	441
16	406.4	610	254	1219	505
18	457	686	286	1372	568
20	508	762	318	1524	632
22	559	838	343	1676	694
24	610	914	381	1829	757
26	660	991	406	1981	821
28	711	1067	438	2134	883
30	762	1143	470	2286	964
32	813	1219	502	2438	1010
34	864	1295	533	2591	1073
36	914	1372	565	2743	1135
38	965	1448	600	2896	1200
40	1016	1524	632	3048	1264
42	1067	1600	660	3200	1326
44	1118	1676	695	3353	1389
46	1168	1753	727	3505	1453
48	1219	1829	759	3658	1516

ANSI/ ASME B16.9 UNS S32750 Pipe Fittings Chemical Composition

Grade	C	Mn	Si	Ni	N	Fe	P	S	Cr	Mo
UNS S32750 Fittings	0.030 (max.)	1.20 (max.)	0.80 (max.)	6.00 – 8.00	0.24 – 0.32	58.095 minimum	0.035 (max.)	0.020 (max.)	24.00 – 26.00	3.00 – 5.00

Schedule 80 Super Duplex S32750 Fittings Mechanical Chart

Grades	Density (g/cm 3)	Melting Point (°C)	Melting Point (°F)	Density (lb/in 3)
Super Duplex UNS S32750 Fittings	7.8	1350	2460	0.281

How To Calculate ASTM A815 UNS S32750 Equal Tee Center?

Super Duplex Equal Tee Formula
90 Degree Elbow
4" X 4" Inches
Pipe Outside Daimeter (O.D.) X 2/5
For Example
4 Inches Pipe (O.D.) Outside Daimeter = 114.30
114.30 X 2 = 228.60 / 5 = 45.72 (MM/ Millimeter) cut back

Tensile Strength Of MSS SP-75 Super Duplex Stainless Steel Pipe Fittings

Tensile Strength (ksi.(Mpa))	≥110（800

Yield Strength Of EN 10253 Super Duplex Stainless Steel Fittings

Yield Strength ksi(Mpa)	≥80（550）

We Are BS1640 2507 Super Duplex Stub End exporter & manufacturer In Mumbai, Call For 1/2 to 48 Inch S32760 Buttweld Reducer Material Test Certificate And Free Sample

Super Duplex Buttweld Fittings Dimensions

Normal Pipe Size For (NPS)	Outside Daimeter For (O.D.)		Buttweld 90 Deg Elbow		Buttweld 45 Deg Elbow		Buttweld Return 180 Deg Elbow
*(In Inches)*			Buttweld LR Elbow	Buttweld SR Elbow	Buttweld LR Elbow		Buttweld LR Elbow
	*(MM/ millimeter)*	*(Inches/ inch.)*	Center to Face (In Inch)	Center to Face (In Inch)	Center to Face (In Inch)	Radius (In Inch)	Center to Center (In Inch)	Back to face (In Inch)
1/2	21.3	0.840	1 1/2	–	5/8		2	1 7/8
3/4	26.7	1.050	1 1/8	–	7/16		2 1/4	1 11/16
1	33.4	1.315	1 1/2	1	7/8		3	2 3/16
1 1/4	42.2	1.660	1 7/8	1 1/4	1		3 3/4	2 3/4
1 1/2	48.3	1.900	2 1/4	1 1/2	1 1/8	3	4 1/2	3 1/4
2	60.3	2.375	3	2	1 3/8	4	6	4 3/16
2 1/2	73.0	2.875	3 3/4	2 1/2	1 3/4	5	7 1/2	5 3/16
3	88.9	3.500	4 1/2	3	2	6	9	6 1/4
3 1/2	101.6	4.000	5 1/4	3 1/2	2 1/4	7	10 1/2	7 1/4
4	114.3	4.500	6	4	2 1/2	8	12	8 1/4
5	141.3	5.563	7 1/2	5	3 1/8	10	15	10 5/16
6	168.3	6.625	9	6	3 3/4	12	18	12 5/16
8	219.1	8.625	12	8	5	12	24	16 5/16
10	273.1	10.750	15	10	6 1/4	15	30	20 3/8
12	323.9	12.750	18	12	7 1/2	18	36	24 3/8

Normal Pipe Size For (NPS)	Outside Daimeter For (O.D.)		ASME/ANSI B16.9 BW End Cap	ASME/ANSI B16.9 BW Straight Tee	ASME/ANSI B16.9 BW Straight Cross	ASME B16.9 BW Stub Ends
*(Inches/ inch.)*	*(MM/ millimeter)*	*(Inch.)*	Length (Inch.)	Center to End (Inch.)	Center to End (Inch.)	Lap Diameter (Inch.)	Long Length (Inch.)	Short Length (Inch.)
1/2	21.3	0.840	1	1	–	1 3/8	3	2
3/4	26.7	1.050	1	1 1/8	–	1 11/16	3	2
1	33.4	1.315	1 1/2	1 1/2	1 1/2	2	4	2
1 1/4	42.2	1.660	1 1/2	1 7/8	1 7/8	2 1/2	4	2
1 1/2	48.3	1.900	1 1/2	2 1/4	2 1/4	2 7/8	4	2
2	60.3	2.375	1 1/2	2 1/2	2 1/2	3 5/8	6	2 1/2
2 1/2	73.0	2.875	1 1/2	3	3	4 1/8	6	2 1/2
3	88.9	3.500	2	3 3/8	3 3/8	5	6	2 1/2
3 1/2	101.6	4.000	2 1/2	3 3/4	3 3/4	5 1/2	6	3
4	114.3	4.500	2 1/2	4 1/8	4 1/8	6 3/16	6	3
5	141.3	5.563	3	4 7/8	4 7/8	7 5/16	8	3
6	168.3	6.625	3 1/2	5 5/8	5 5/8	8 1/2	8	3 1/2
8	219.1	8.625	4	7	7	10 5/8	8	4
10	273.1	10.750	5	8 1/2	8 1/2	12 3/4	10	5
12	323.9	12.750	6	10	10	15	10	6

Our Materials Are Delivered To The Following Countries::

South Africa, Brazil, Saudi Arabia (KSA), Kuwait

Super Duplex Pipe Fittings

Kuwait, Saudi Arabia (KSA), Brazil, South Africa

Australia, Nigeria, Turkey, UK, Belgium, Egypt

Super Duplex Elbow

Nigeria, Australia, Turkey, Egypt, UK, Belgium

Hong Kong, Spain, Oman, Mexico, Poland, Japan

Super Duplex 2507 Pipe Fittings

Oman, Mexico, Hong Kong, Spain, Poland, Japan

Iran, Italy, Chile, Singapore, Canada, China

Super Duplex Stainless Steel Pipe Fittings

Canada, Chile, Italy, Iran, Singapore, China

Malaysia, United Kingdom -UK, Europe, UAE

Super Duplex Tube Fittings

United Kingdom -UK, Malaysia, Europe, UAE

Alloy 2507 Tee

Philippines, Indonesia, Dammam -KSA

UNS S32750 Seamless Reducer

Thailand, Qatar, France, Europe

Super Duplex Buttweld Fittings

USA, Bangladesh, Germany, Finland

Test Certificates

Raw Materials Certificate
EN 10204/3.1B,
Third Party Inspection Repor
100% Radiography Test Report

How To Make A 2507 Super Duplex 90 Degree Elbow Out Of Pipe?

UNS S32760 Pipe Fittings Chemical Structure

Grade	C	Mn	Ni	N	Fe	Si	P	S	Cr	Mo
Super Duplex S32760 Fittings	0.05 (max.)	1.00 (max.)	6.00 – 8.00	0.20 – 0.30	57.61 (min.)	1.00 (max.)	0.030 (max.)	0.010 (max.)	24.00 – 26.00	3.00 – 4.00

1/2 to 48 Inch S32760 Super Duplex Fittings Mechanical Properties

Grades	Melting Point (°C)	Melting Point (°F)	Density (g/cm 3)	Density (lb/in 3)
Super Duplex S32760 Fittings	1350	2460	7.8	0.281

Types Of Super Duplex Pipe Fittings

Super Duplex Elbow

Super Duplex 2507 Tee

2507 Super Duplex Stub End

Alloy 2507 Reducer

UNS S32750 End Cap

ASTM A815 Super Duplex Bend

2507 Super Duplex Reducer

UNS S32760 Buttweld Weldolet

ASME SA815 Super Duplex Pipe Corss

2507 Super Duplex Reducing Tee

Super Duplex Stainless 90 Deg Elbow

Super Duplex 2507 Equal Tee

Super Duplex S32750 Concentric Reducer

ASTM A815 Super Duplex 45 Degree Elbow

Super Duplex Eccentric Reducer

Hardness Of Super Duplex Tube Fittings

Hardness	HRC	≥32

Super Duplex Threaded Fittings Dimensions

BS1640 ASME SA815 Super Duplex Reducer Dimensions

RCD Reiso Code	BIG Ø			SMALL Ø			Hight (H) MM	Theoretical Weight In KG (Kilogram)
RCD Reiso Code	(DN)	(D) MM	Thickness Of (S) In MM.	(DN)	(D) MM	Thickness Of (S) MM	Hight (H) MM	Theoretical Weight In KG (Kilogram)
27 21	3/4	26.9	2.3	1/2	21.3	2.0	38	0.08
33 21	1	33.7	2.6	1/2	21.3	2.0	50	0.09
33 27	1	33.7	2.6	3/4	26.9	2.3	50	0.09
42 21	1"1/4	42.4	2.6	1/2	21.3	2.0	50	0.12
42 27				3/4	26.9	2.3		0.13
42 33				1	33.7	2.6		0.14
*48 21	1"1/2	48.3	2.6	1/2	21.3	2.0	64	0.18
48 27				3/4	26.9	2.3		0.19
48 33				1	33.7	2.6		0.20
48 42				1"1/4	42.4	2.6		0.20
60 27	2	60.3	2.9	3/4	26.9	2.3	76	0.30
60 33				1	33.7	2.6		0.31
60 42				1"1/4	42.4	2.6		0.32
60 48				1"1/2	48.3	2.6		0.33
76 33	2"1/2	76.1	2.9	1	33.7	2.6	90	0.40
76 42				1"1/4	42.4	2.6		0.47
76 48				1"1/2	48.3	2.6		0.48
76 60				2	60.3	2.6		0.49
89 42	3	88.9	3.2	1"1/4	42.4	2.6	90	0.55
89 48				1"1/2	48.3	2.6		0.61
89 60				2	60.3	2.9		0.62
89 76				2"1/2	76.1	2.9		0.63
114 48	4	114.3	3.6	1"1/2	48.3	2.6	100	0.85
114 60				2	60.3	2.9		0.98
114 76				2"1/2	76.1	2.9		1.00
114 89				3	88.9	3.2		1.02
139 60	5	139.7	4.0	2	60.3	2.9	127	1.60
139 76				2"1/2	76.1	2.9		1.70
139 89				3	88.9	3.2		1.74
139 114				4	114.3	3.6		1.76
*168 76	6	168.3	4.5	2"1/2	76.1	2.9	140	2.60
168 89				3	88.9	3.2		2.70
168 114				4	114.3	3.6		2.82
168 139				5	139.7	4.0		2.94
219 114	8	219.1	6.3	4	114.3	3.6	152	5.03
219 139				5	139.7	4.0		5.12
219 168				6	168.3	4.5		5.18
*273 114	10	273.0	6.3	4	114.3	3.6	178	7.00
*273 139				5	139.7	4.0		7.20
273 168				6	168.3	4.5		7.40
273 219				8	219.1	6.3		7.55
323 168	12	323.9	7.1	6	168.3	4.5	203	11.00
323 219				8	219.1	6.3		11.10
323 273				10	273	6.3		11.20

Value Added Services

Hardness Test
Chemical Equipment
Flattening Test
Mechanical Testing Such as Tensile of Area
Pitting Resistance Test

Positive Material Identification – PMI Testing
Micro and MacroTest
Chemical Analysis – Spectro Analysis
Intergranular Corrosion (IGC) Test

Werkstoff No 1.4410 Fittings Size Chart

O.D. (Outside Daimeter) And I.D. (Inside Daimeter)	Equivalent List	Diameter Of Nominal Pipe	Threads Size In Inches
5/16	0.313	1/16	27
13/32	0.405	1/8	27
35/64	0.540	1/4	18
43/64	0.675	3/8	18
27/32	0.840	1/2	14
1-3/64	1.050	3/4	14
1-5/16	1.315	1	11-1/2
1-21/32	1.660	1-1/4	11-1/2
1-29/32	1.900	1-1/2	11-1/2
2-3/8	2.375	2	11-1/2
2-7/8	2.875	2-1/2	8
3-1/2	3.500	3	8
4	4.000	3-1/2	8
4-1/2	4.500	4	8

Application Of SAF 2507 Fittings

2507 Super Duplex Stub End For Dairy And Food Processing
S32760 Buttweld Reducer For Modern Architecture
ASME SA815 Super Duplex Forged Fittings For Heat Exchanger
Super Duplex Pipe Fittings For Fluid Piping
Super Duplex Stainless Steel Pipe Fittings For Power Plants
UNS S32750 Seamless Tee For Oil And Gas Industry
ASTM A815 Super Duplex 2507 Pipe Fittings For Pharmaceutical Processing Industry
Alloy 2507 Elbow For Pulp And Paper Industry

Super Duplex S32750 Socket Weld Fittings Dimensions As Per ASME B16.11

Size	NPS	Daimeter Of Socket Weld Bore (B)	Bore Diameter of Socket Weld Fitting(2) D		Socket Wall (Thickness1) C				Body Thickness G		Depth of Socket Weld Fitting (Minimum) (J)
			Bore Diameter of Socket Weld Fitting(2) D		Class Fitting Designation				Class Fitting Designation
			Designation		Class 3000#		Class 6000#		Class 3000#	Class 6000#
			Class 3000	Class 6000	Available	(Min.)	Available	(Min.)	(Min.)	(Min.)
6	1/8	11.2 10.8	7.6 6.1	7.6 6.1	3.18	3.18	3.96	3.43	2.41	3.15	9.5
8	1/4	14.6 14.2	10.0 8.5	10.0 8.5	3.78	3.30	4.60	4.01	3.02	3.68	9.5
10	3/8	18 17.6	13.3 11.8	13.3 11.8	4.01	3.50	5.03	4.37	3.20	4.01	9.5
15	1/2	22.2 21.8	16.6 15.0	16.6 15.0	4.67	4.09	5.97	5.18	3.73	4.78	9.5
20	3/4	27.6 27.2	21.7 20.2	21.7 20.2	4.90	4.27	6.96	6.04	3.91	5.56	12.5
25	1	34.3 33.9	27.4 25.9	27.4 25.9	5.69	4.98	7.92	6.93	4.55	6.35	12.5
32	1-1/4	43.1 42.7	35.8 34.3	35.8 34.3	6.07	5.28	7.92	6.93	4.85	6.35	12.5
40	1-1/2	49.2 48.8	41.6 40.1	41.6 40.1	6.35	5.54	8.92	7.80	5.08	7.14	12.5
50	2	61.7 61.2	53.3 51.7	53.3 51.7	6.93	6.04	10.92	9.50	5.54	8.74	16.0
65	2-1/2	74.4 73.9	64.2 61.2	64.2 61.2	8.76	7.67			7.01		16.0
80	3	90.3 89.8	79.4 76.4	79.4 76.4	9.52	8.30			7.62		16.0
100	4	115.7 115.2	103.8 100.7	103.8 100.7	10.69	9.35			8.56		16.0

One Stop Shop For All Super Duplex Forged Fittings Material In Mumbai, India

Super Duplex Plug

Super Duplex 2507 Swage Nipple

2507 Super Duplex Bushing

Alloy 2507 Coupling

UNS S32750 Super Duplex Nipples

ASME SA815 Super Duplex Union

Documentation

Fumigation Certificates
Guarantee Letter
Raw Material Test Reports
Fumigation Certificates

Heat Treatment Charts
Commercial Invoice which includes HS Code
QAP (Quality Assurance Plan)
NABL approved Laboratory Test Reports

Weldability Of DIN 2605 Super Duplex Compression Fittings

ASTM A815 Duplex Pipe Fittings Can Be Readily Welded with GMAW/ GTAW/ Plasma/ SMAW Welding methods. Super Duplex Stainless Steel Pipe Fittings can be manufactured by hot forming or cold forming methods.

Buy MSS SP-43 ASME SA815 Super Duplex Forged Fittings According To Standard At Lowest Possible Price Online, Pressure Temperature Ratings For EN 10253 SAF 2507 End Cap

How To Calculate Surface Area Of ASTM A815 UNS S32750 Concentric Reducer?

UNS S32750 Equal Tee Dimension

NPS Of Equal Tee	Outside Daimeter (O.D.) at bevel	Center-to-End
NPS Of Equal Tee	Outside Daimeter (O.D.) at bevel	(C) Run	(M) Outlet
1/2"	21.3	25	25
3/4"	26.7	29	29
1"	33.4	38	38
1 1/4"	42.2	48	48
1 1/2"	48.3	57	57
2"	60.3	64	64
2 1/2"	73.0	76	76
3"	88.9	86	86
3 1/2"	101.6	95	95
4"	114.3	105	105
5"	141.3	124	124
6"	168.3	143	143
8"	219.1	178	178
10"	273.0	216	216
12"	323.8	254	254
14"	355.6	279	279
16"	406.4	305	305
18"	457.0	343	343
20"	508.0	381	381
22"	559.0	419	419
24"	610.0	432	432

Super Duplex End Cap Dimensions In MM

NPS Of Pipe Cap	O.D. (Outside Daimeter) Of D	Length Of (H)	Length Of (H1)
1/2	21.3	25	25
3/4	26.7	25	25
1	33.4	38	38
1.1/4	42.2	38	38
1.1/2	48.3	38	38
2	60.3	38	44
2.1/2	73	38	51
3	88.9	51	64
3.1/2	101.6	64	76
4	114.3	64	76
5	141.3	76	89
6	168.3	89	102
8	219.1	102	127
10	273	127	152
12	323.8	152	178
14	355.6	165	191
16	406.4	178	203
18	457	203	229
20	508	229	254
22	559	254	254
24	610	267	305
26	660	267	…
28	711	267	…
30	762	267	…
32	813	267	…
34	864	237	…
36	914	267	…
38	965	305	…
40	1016	305	…
42	1067	305	…
44	1118	343	…
46	1168	343	…
48	1219	343	…

Get DIN 2605 Super Duplex Steel S32750 & S32760 Welded Fittings Chemical Composition And Mechanical Properties Online, Refer Material Equivalent.

Packaging Of Super Duplex Seamless Fittings

Super Duplex Seamless Fittings packaging

UNS S32760 Welded Fittings Standards

BS1640
DIN 2605
MSS SP-75
ANSI/ ASME B16.9
MSS SP-43
DIN EN 10253

2507 Super Duplex Stub End Dimensions

Normal Pipe Size For (NPS)	O.D. For (Outside Daimeter) of barrel		Length Of (F)		Radius Of(R)	Diameter Of (G)
Normal Pipe Size For (NPS)	(Min.)	(Max.)	ASME B16.9 Long Pattern	ASME B16.9 Short Pattern	Radius Of(R)	Diameter Of (G)
1/2″	20.5	22.8	76	51	3	35
3/4″	25.9	28.1	76	51	3	43
1″	32.6	35.0	102	51	3	51
1 1/4″	41.4	43.6	102	51	5	64
1 1/2″	47.5	49.9	102	51	6	74
2″	59.5	62.4	152	64	8	92
2 1/2″	72.2	75.3	152	64	8	105
3″	88.1	91.3	152	64	10	127
3 1/2″	100.8	104.0	152	76	10	140
4″	113.5	116.7	152	76	11	157
5″	140.5	144.3	203	76	11	186
6″	167.5	171.3	203	89	13	216
8″	218.3	222.1	203	102	13	270
10″	272.3	277.2	254	127	13	324
12″	323.1	328.0	254	152	13	381
14″	354.8	359.9	305	152	13	413
16″	405.6	411.0	305	152	13	470
18″	456.0	462.0	305	152	13	533
20″	507.0	514.0	305	152	13	584
22″	558.0	565.0	305	152	13	641
24″	609.0	616.0	305	152	13	692