Searching For ANSI B16.5 Flange manufacturer For Custom Size? Industrial Flanges supplier in Mumbai, India


ASME B16.5 Flange


ASME stands for the American Society for Mechanical Engineers that has laid down standards for manufacturing various products. They have set standards for manufacturing different grades of products. ASME Flange is one such product that is manufactured as per these specifications. This specification is divided into several grades. One such type is the ASME B16.5 Flange. As per this specification, these B16 5 Flanges are made up of cast, or forged material whereas blind flanges are made up of cast, forged, or plate material. This standard also consists of recommendations regarding flange gasket, flange bolting, and joints. 

As per ASME B16 5 Flange Dimensions minimum wall or flange thickness, permissible material for construction, and work stress allowed are mentioned in this standard. Flange ASME B16 5  provides for pressure integrity standard that helps in providing minimum uniform performance criteria, and a dimensional standard that helps in monitoring and controlling the parameter of the component. Flange ANSI B16 5 can be pressure rated depending upon a 3 step process. The first is to determine the material to be used for manufacturing. The second is to determine the maximum temperature and operating pressure. Third and the last is to refer to the correct ANSI Flange Standard table. 

D Table Flange is often confused with a standard. However, it is the table that denotes the pressure rating of the flanges that belong to a particular standard. In this case the BS 10 of the British standard institute. ASA 150 Flange is said to be the most commonly used standard pipe gasket size. They can be manufactured as full face gaskets or IBC gaskets. It has a pipe size ranging between 1 inch to 12 inches in diameter. High Pressure Pipe Flange needs to meet top quality standards and require to be leak free. ANSI B16.5 Flanges are widely used in refinery, power generation, petrochemical, energy, and oil and gas industry. 




ASME B16.5 Specifications


SpecificationASME B16.5 Flange
Type Of Industrial flangesBlind Flange/ Slip On Flange/ Weld Neck Flange/ Socket Weld Flanges/ RTJ Flanges/ Lap Joint Flanges/ Threaded/ Reducing Flanges
Flanges Manufacturing MaterialStainless Steel, Brass, Bronze, Duplex Steel, Super Duplex, Incoloy, Alloy 20, Copper, Carbon Steel, Nickel Alloys, Tantalum, Cupro-Nickel Inconel, Monel, Titanium, Hastalloy, Alloy Steel.
Type Of Pipe Flange MethodsForging/ Casting/ Rolling And Cutting
ANSI Flange Pressure ClassClass 150/ Class 300/ Class 400/ Class 600/ Class 600/ Class 900/ Class 1500/ Class 2500
Available ScheduleSCH 5S/ SCH 10/ SCH 40/ SCH 80/ SCH 120/ SCH 160/ SCH 180 To XXS
Dimensions And StandardEN 1092-1 Flanges/ EN 1092-2 Flanges/ API Flanges/ DIN 2501 Flanges/ DIN 2527 Flanges/ DIN 2561 Flanges/ P235GH
LengthNPS 1⁄₂" To NPS 48”
High Temperature(Maximum) 200°C (400°F) For Class 150
Flanges Face TypeRTJ Flanges/ FF Flanges/ RF Flanges/ lap joint Flange/ Male And Female (M&F) Flange/ Tongue And Groove (T&G) Flange.
Mimimum ThicknessNPS (Normal Pipe Size) ≤ 18

Check 4 And 8 Inch High Pressure Pipe Flange Price Per Inches Ex Mumbai, View Flange ANSI B16 5 Dimensions/ Tolerances/ Pressure Rating/ Bolts/ Size/ Weight Chart


Flange ASME Price List In India


Type Of FlangesSizeSCHClassMaterialPrice In INR (India) Per Piece
Blind Flange3/4SCH 40150Carbon Steel125.00
Blind1"SCH 40150-150.00
Blind1-1/2"SCH 40150-250.00
Weld Neck Flange2"SCH STD150-350.00
Weld Neck4"SCH STD300-732.00
Weld Neck6"SCH 80300-1037.00
Slip On Flange2"SCH 40150-200.00
Slip On3"SCH 40150-350.00
Slip On8"SCH 80300Carbon Steel1342.00

Well-known ASME B16.5 Flange Manufacturer In India. For final Pipe Flange Price List Please Call on +91-9987870874 or drop an Email to info@fastwell.in.

Buy Pipe Flange For Best Price

8 Common Type Of ANSI B16.5 Flanges


8 Common Type Of ANSI B16.5 Flanges

Industrial Flanges Hole Marking Formula


Industrial Flanges Hole Marking Formula

ASME B16.5 Flange Weight Chart


NPS For Normal Pipe SizeDimensions In MM (Millimeter)Weight In (KG) Kilogram
NPS In InchesSize In MMPipe Flanges
O.D. (Outside Daimeter) In
(MM)
ASME B16.5 Flange
Thickness Table
(D)
In (MM)
SORF For (Slip On)
SW For (Socket Weld)
WNRF For (Weld Neck)BLRF For (Blind)
1/21588.911.20.40.50.4
3/42098.612.70.60.70.6
12510814.20.810.9
1 1/432117.315.711.31.2
1 1/24012717.51.31.71.5
250152.419.12.12.62.4
2 1/265177.822.43.34.13.9
380190.523.93.94.94.9
3 1/290215.923.94.86.16.2
4100228.623.95.36.87.0
512525423.96.18.68.6
6150279.425.47.510.611.3
8200342.928.412.117.619.6
10250406.430.216.52428.6
12300482.631.826.236.543.2
14350533.435.134.648.458.1
16400596.936.644.860.676.1
1845063539.648.968.393.7
20500698.542.961.984.5122.0
24600812.847.886.9115185.0

ASME B16.5 Pressure Ratings


ASME B16.5 Pressure Ratings

exporter And manufacturer Of D Table Flange In Schedule 80 & Sch 40 Wall Thickness, Don't Pay Extra, Buy Exact Size From Our Inventory


High Pressure Pipe Flange Size Chart


(NPS) For Nominal Pipe Size In
(inches)
As Per ASME B16.5 Class 150
Flange Diameter
In (inch)
Bolts Number
Bolt Diameter
In (inch)
Bolt Holes (B.H.) Diameter In
(inch)
Bolt Circle (B.C.)
In(inch)
1/43-3/841/20.622-1/4
1/23-1/241/20.622-3/8
3/43-7/841/20.622-3/4
14-1/441/20.623-1/8
1-1/44-5/841/20.623-1/2
1-1/2541/20.623-7/8
2645/80.754-3/4
2-1/2745/80.755-1/2
37-1/245/80.756
3-1/28-1/285/80.757
4985/80.757-1/2
51083/40.888-1/2
61183/40.889-1/2
813-1/283/40.8811-3/4
1016127/8114-1/4
1219127/8117
14211211.1218-3/4
1623-1/21611.1221-1/4
1825161-1/81.2522-3/4
2027-1/2201-1/81.2525
2432201-1/41.3829-1/2

Types Of Flanges Used In Oil And Gas Industry


ASME B16.5 Flange Gasket Dimensions Chart


NPS For (Normal Pipe Size)Gasket (I.D.) Inside Daimeter
Gasket (O.D.) Outside Daimeter
#150LB #300LB #400LB #600LB #900LB
1/2"0.841.8752.1252.1252.1252.50
3/4"1.062.252.6252.6252.6252.75
1"1.312.6252.8752.8752.8753.125
1 1/4"1.6633.253.253.253.50
1 1/2"1.913.3753.753.753.753.875
2"2.384.1254.3754.3754.3755.625
2 1/2"2.884.8755.1255.1255.1256.50
3"3.505.3755.8755.8755.8756.625
4"4.506.8757.1257.007.6258.125
5"5.567.758.508.3759.509.75
6"6.628.759.8759.7510.5011.375
8"8.621112.12512.0012.62514.125
10"10.7513.37514.2514.12515.7517.125
12"12.7516.12516.62516.5018.0019.625

Do Not Forget To Compare Our Cost With Other ANSI Flange Standard Manufacturer In India, We Follow Strict Quality Policy And Exporter As Per En 10216-5 European Standard

Bolt Torque ASME B16 5 Flanges


Flanges Size in (Inches)Flanges Size in (Millimeter)Radial Projection (Maximum)
No Deeper Than the Bottom In MMDeeper Than the Bottom In MM
1/2153.01.5
3/4203.01.5
1253.01.5
1 1/4323.01.5
1 1/2403.01.5
2503.01.5
2 1/2653.01.5
3804.51.5
3 1/2906.03.0
41006.03.0
51256.03.0
61506.03.0
82008.04.5
102508.04.5
123008.04.5
143508.04.5
1640010.04.5
1845012.06.0
2050012.06.0
2460012.06.0

Face Types Of Contact ASME B16.5


Types of Flanges Faces DIN And EN 1092-1
Without (RF) Raised Face Form A
(RF) For Raised Face Form B1
(RF) For Raised Face Form B1
(RF) For Raised Fac Form B2
DIN2512 Tongue Flange Form C
DIN 2512 Groove Flange Form D
DIN 2513 Male Flange Form E
DIN 2513 Female Flange Form F


Type Of ASA B16.5 According To PN-DIN-EN


Types Of Pipe FlangesEN standardDIN standardPressureGr.
Blind FlangeEN1092-1/05DIN 2527PN6, 63, 100, 16, 25,
40, 10, 160,
250, 320, 400
S235JR, P245GH, P250GH / C 22.8
P265GH, P355NH, P280GH, 16Mo3,
13CrMo4-5, P355QH1 / W/TStE 355,
1.4301, 1.4401, 1.4404, 1.4307, 1.4541,
Lap Joint FlangeEN1092-1/02DIN 2641, 2642, 2655, 2656Pn6, Pn16, 25, 10,
40, 160, 63, 100,
P250GH / S235JR, C 22.8, P245GH,
P265GH, 16Mo3, P280GH, P355NH,
13CrMo4-5, P355QH1 / W/TStE 355,
1.4301, 1.4401, 1.4404, 1.4307, 1.4541
Flat Face FlangeEN1092-1DIN 2573 And DIN 2576PN100, PN16, PN25,
PN40, PN63, PN6, PN10, PN160,
PN250, PN400, PN320
S235JR, P280GH, P250GH / C 22.8, P245GH,
P265GH, P355NH, 16Mo3,
13CrMo4-5, P355QH1 / W/TStE 355,
1.4401, 1.4404, 1.4301, 1.4307, 1.4541
Weld Neck FlangeEN 1092-1DIN 2627, DIN 2638PN6, 63, 100, 25,
40, 10, 16, 160,
250, 320, 400
S235JR, P250GH / C 22.8, P245GH,
P355NH, 16Mo3, P265GH, P280GH
13CrMo4-5, P355QH1 / W/TStE 355,
1.4401, 1.4404, 1.4301, 1.4307, 1.4541

Threaded Flange

EN 1092-1DIN 2558 | DIN 2565 – DIN 2569PN6, 63, 100, 25,
40, 10, Pn16, 160,
250, 320, PN400
P245GH, S235JR, P250GH / C 22.8
P355NH, 16Mo3, P265GH, P280GH,
13CrMo4-5, P355QH1 / W/TStE 355,
1.4541, 1.4401, 1.4404, 1.4301, 1.4307

ANSI Flange Bore Dimensions


Lap Joint (Loose) And Slip On (SORF) Flange Bores

Size Chart Tolerance Of
(NPS) For Normal Pipe Size ≤ 10 +1.0, -0.0 mm (+0.03,-0.0 in.)
(NPS) For Normal Pipe Size ≥ 12 +1.5, -0.0 mm (+0.06,-0.0 in.)

Counter Bores, Threaded (NPT) Flanges

Size Chart Tolerance Of
(NPS) For Normal Pipe Size ≤ 10 +1.0, -0.0 mm (+0.03,-0.0 in.)
(NPS) For Normal Pipe Size ≥ 12 +1.5, -0.0 mm (+0.06,-0.0 in.)

Counter Bores, Weld Neck (Welding) Flanges

Size Chart Tolerance
1/2 ≤ Normal Size Of Pipe ≤ 3 ±0.25 mm (±0.010 in.)

Flange Bolt Size And Length Chart


(H.) For Flange Hight

(O.D.) For Flange Outside Diameter

(PCD) For Flange Pitch Circum Face Diameter Hole To Hole Dimension

(Hole Dia.) For Flange Bolting Hole Size

(Flange No.) For Flange Number Of Bolting Hole


B16.5 - Pipe Flanges Marking


ASME B16.5 Flange Marking includes ANSI Or ASME/ ASA Code

  1. Name of Manufacturer = (Fastwell Engineering)
  2. NPS = (6 Inch Class 1)
  3. Flanges Type = (Weld Neck)
  4. Schedule = (SCH 80)
  5. Material Designation = (ASTM A350 LF2)
  6. Country Name = (Made In India)
  7. Heat Number = (HC24584)
B16.5 - Pipe Flanges Making Formula


Advantages Of Industrial Pipe Flange


Type Of ASME B16.5 Flange

Check Pressure Class Of Pipe Flange

NPS List

Advantages & Applications

Slip On Flange

Low Pressure

All

Simple Installation/ Low Price/ Easy To Use

Blind Flange

Very High Pressure

All

Pressure Testing/ Connected To Closing Pipe And Valve/ Low Price/ Easy Installation

Socket Weld Flanges

High Pressure

Small

SW Flange For ; Smooth Bore And Better Fluid Flow

Threaded Flange

Low Pressure

Small

Threaded Flanges (NPT/ BSP): Bore Which Matches An External Thread On The Pipe

Lap Joint Flange

Low Pressure

All

Lap Joint Flanges Have A Long Neck And Stub End That Is Welded To The Pipe

Weld Neck Flange

High Pressure

All

WN Flange use Conditions Are Critical And Severe.


B16 5 Flanges Manufacturer In India Offer Different Size At Factory Price, Supply Flange ASME B16 5 In Accordance With ASTM, EN, BS, JIS, DIN, And ISO, PN Standard.

Dimension Of ANSI B16.5 Class 400 Flange


(Nominal Pipe Size) For NPS(O.D.) For Outside DaimeterMin. Wall Thickness Of (T)
RF (Raised Face) Diameter Of (R)Number of (B.H.) Bolts HolesDiameter Of Flanges HoleASME B16.5 Bolt Circle
(BC)
SO Bore I.D. Of
(SB)
Diameter Of (HB)
Hub Base
Diameter Of (HT)
Hub Top
SO Length Of
(SL)
WN Length
(WL)
* WN Bore Inside Daimeter
(WB)
123.750.561.3840.632.620.881.50.840.882.06*
344.620.621.6940.753.251.091.881.051.002.25*
14.880.692.0040.753.501.362.121.321.062.44*
1145.250.812.5040.753.881.702.501.661.122.62*
1126.120.882.8840.884.501.952.751.901.252.75*
26.501.003.6280.755.002.443.312.381.442.88*
2127.501.124.1280.885.882.943.942.881.623.12*
38.251.255.0080.886.623.574.623.501.813.25*
3129.001.385.5081.007.254.075.254.001.943.38*
410.001.386.1981.007.884.575.754.502.003.50*
511.001.507.3181.009.255.667.005.562.124.00*
612.501.628.50121.0010.626.728.126.632.254.06*
815.001.8810.62121.1213.008.7210.258.632.694.62*
1017.502.1212.75161.2515.2510.8812.6210.752.884.88*
1220.502.2515.00161.3817.7512.8814.7512.753.125.38*
1423.002.3816.25201.3820.2514.1416.7514.003.315.88*
1625.502.5018.50201.5022.5016.1619.0016.003.696.00*
1828.002.6221.00241.5024.7518.1821.0018.003.886.50*
2030.502.7523.12241.6227.0020.2023.1220.004.006.62*
2233.002.8825.25241.7529.2522.2225.2522.004.256.75*
2436.003.0027.25241.8832.0024.2527.6224.004.506.88*

ASME 600 Flange Dimensions In MM


(Nominal Pipe Size) For NPS(O.D.) For Outside DaimeterMin. Wall Thickness Of (T)
RF (Raised Face) Diameter Of (R)Number of (B.H.) Bolts HolesDiameter Of Flanges HoleASME B16.5 Bolt Circle
(BC)
SO Bore I.D. Of
(SB)
Diameter Of (HB)
Hub Base
Diameter Of (HT)
Hub Top
SO Length Of
(SL)
WN Length
(WL)
* WN Bore Inside Daimeter
(WB)
123.750.561.3840.632.620.881.500.840.882.06*
344.620.621.6940.753.251.091.881.051.002.25*
14.880.692.0040.753.501.362.121.321.062.44*
1145.250.812.5040.753.881.702.501.661.122.62*
1126.120.882.8840.884.501.952.751.901.252.75*
26.501.003.6280.755.002.443.312.381.442.88*
2127.501.124.1280.885.882.943.942.881.623.12*
38.251.255.0080.886.623.574.623.501.813.25*
3129.001.385.5081.007.254.075.254.001.943.38*
410.751.506.1981.008.504.576.004.502.124.00*
513.001.757.3181.1210.505.667.445.562.384.50*
614.001.888.50121.1211.506.728.756.632.624.62*
816.502.1910.62121.2513.758.7210.758.633.005.25*
1020.002.5012.75161.3817.0010.8813.5010.753.386.00*
1222.002.6215.00201.3819.2512.8815.7512.753.626.12*
1423.752.7516.25201.5020.7514.1417.0014.003.696.50*
1627.003.0018.50201.6323.7516.1619.5016.004.197.00*
1829.253.2521.00201.7525.7518.1821.5018.004.627.25*
2032.003.5023.00241.7528.5020.2024.0020.005.007.50*
2234.253.7525.25241.8830.6322.2226.2522.005.257.75*
2437.004.0027.25242.0033.0024.2528.2524.005.508.00*

ASME B16.5 Class 900 Flange Dimensions


(Nominal Pipe Size) For NPS(O.D.) For Outside DaimeterMin. Wall Thickness Of (T)
RF (Raised Face) Diameter Of (R)Number of (B.H.) Bolts HolesDiameter Of Flanges HoleASME B16.5 Bolt Circle
(BC)
SO Bore ID
(SB)
* WN Bore ID
(WB)
Diameter Of (HB)
Hub Base
Diameter Of (HT)
Hub Top
SO Length Of
(SL)
WN Length
(WL)
39.501.505.0081.007.503.57*5.003.502.124.00
411.501.756.1981.259.254.57*6.254.502.754.50
513.752.007.3181.3811.005.66*7.505.563.125.00
615.002.198.50121.2512.506.72*9.256.633.385.50
818.502.5010.63121.5015.508.72*11.758.634.006.38
1021.502.7512.75161.5018.5010.88*14.5010.754.257.25
1224.003.1215.00201.5021.0012.88*16.5012.754.637.88
1425.253.3816.25201.6322.0014.14*17.7514.005.128.38
1627.753.5018.50201.7524.2516.16*20.0016.005.258.50
1831.004.0021.00202.0027.0018.18*22.2518.006.009.00
2033.754.2523.00202.1329.5020.20*24.5020.006.259.75
2441.005.5027.25202.6335.5024.25*29.5024.008.0011.50

ASME B16.5 Class 1500 Flange Dimensions


(Nominal Pipe Size) For NPS(O.D.) For Outside DaimeterMin. Wall Thickness Of (T)
RF (Raised Face) Diameter Of (R)Number of (B.H.) Bolts HolesDiameter Of Flanges HoleASME B16.5 Bolt Circle
(BC)
So Bore I.D. Of
(SB)
Diameter Of (HB)
Hub Base
Diameter Of (HT)
Hub Top
SO Length Of
(SL)
WN Length
(WL)
* WN Bore Inside Daimeter
(WB)
124.750.881.3840.883.250.881.500.841.252.38*
345.121.001.6940.883.501.091.751.051.382.75*
15.881.122.0041.004.001.362.061.321.622.88*
1146.251.122.5041.004.381.702.501.661.622.88*
1127.001.252.8841.124.881.952.751.901.753.25*
28.501.503.6381.006.502.444.122.382.254.00*
2129.621.624.1381.127.502.944.882.882.504.12*
310.501.885.0081.258.00-5.253.50-4.62*
412.252.126.1981.389.50-6.384.50-4.88*
514.752.887.3181.6311.50-7.755.56-6.12*
615.503.258.50121.5012.50-9.006.63-6.75*
819.003.6210.63121.7515.50-11.508.63-8.38*
1023.004.2512.75122.0019.00-14.5010.75-10.00*
1226.504.8815.00162.1222.50-17.7512.75-11.12*
1429.505.2516.25162.3825.00-19.5014.00-11.75*
1632.505.7518.50162.6327.75-21.7516.00-12.25*
1836.006.3821.00162.8830.50-23.5018.00-12.88*
2038.757.0023.00163.1232.75-25.2520.00-14.00*
2446.008.0027.25163.6339.00-30.0024.00-16.00*

Buy Steel Pipe Flanges Machine


Buy Steel Pipe Flanges Machine

ANSI/ ASME B16.5 Material Packaging


Pipe Flanges Packaging
asme b16.5 flange Packaging


ISO Flange Bolt & Stud Chart


Size in (Inches)Size in (Millimeter)Number of BoltsBolt (UNC) SizeRF (Raised Face) Stud Length Stud (ISO) SizeMachine Flange Bolt Length
1/21541/255M1450
3/42041/265M1450
12541/265M1455
1 1/43241/270M1455
1 1/24041/270M1465
25045/885M1670
2 1/26545/890M1675
38045/890M1675
3 1/29085/890M1675
410085/890M1675
512583/495M2085
615083/4100M2085
820083/4110M2090
10250127/8115M24100
12300127/8120M24100
14350121135M27115
16400161135M27115
18450161 1/8145M30125
20500201 1/8160M30140
24600201 1/4170M33150

ASME B16.5 Flange Dimensions


NPS(O.D.) For
Outside Diameter
Minimum (Wall Thickness)
(T)
Diameter Of Raised Face (RF)
(R)
Number of Bolts HolesDia. of HolesB.C. For
(Bolt Circle)
SORF Bore I.D.
(SB)
WNRF Bore I.D.
(WB)
Diameter Of Hub Base
(H.B.)
Diameter of Hub Top
(H.T.)
SORF Length
(S.L.)
WNRF Length
(W.L.)
123.500.381.3840.622.380.880.621.190.840.561.81
343.880.441.6940.622.751.090.821.501.050.562.00
14.250.502.0040.623.121.361.051.941.320.622.12
1144.620.562.5040.623.501.701.382.311.660.752.19
1125.000.622.8840.623.881.951.612.561.900.812.38
26.000.693.6240.754.752.442.073.062.380.942.44
2127.000.814.1240.755.502.942.473.562.881.062.69
37.500.885.0040.756.003.573.074.253.501.122.69
3128.500.885.5080.757.004.073.554.814.001.192.75
49.000.886.1980.757.504.574.035.314.501.252.94
510.000.887.3180.888.505.665.056.445.561.383.44
611.000.948.5080.889.506.726.077.566.631.503.44
813.501.0610.6280.8811.758.727.989.698.631.693.94
1016.001.1212.75121.0014.2510.8810.0212.0010.751.883.94
1219.001.1915.00121.0017.0012.8812.0014.3812.752.124.44
1421.001.3116.25121.1218.7514.1413.2515.7514.002.194.94
1623.501.3818.50161.1221.2516.1615.2518.0016.002.444.94
1825.001.5021.00161.2522.7518.1817.2519.8818.002.625.44
2027.501.6223.00201.2525.0020.2019.2522.0020.002.815.62
2229.501.7525.25201.3827.2522.2221.2524.2522.003.075.82
2432.001.8127.25201.3829.5024.2523.2526.1224.003.195.94

Large Diameter Flanges Dimensions


Large Diameter Flanges Dimensions

ASME B16.36 Orifice Flange Dimensions


ASME B16.36 Orifice Flange Dimensions
NPSHUB
Daimeter
Daimeter Of
RF (Raised Face)
O.D. For Outside DaimeterMinimum
Thickness
Flange
Height Of
ASME B16.36 Flange
Daimeter Of
HUB
TAB
Daimeter
(A)(R)(O)(T)(H)(X)(TG)
133.450.812536.681546.4
48.373.015536.684706.4
260.392.116536.684846.4
73.0104.819036.6871006.4
388.9127.021036.6871179.5
4114.3157.225536.69014612.7
6168.3215.932036.69820612.7
8219.1269.938039.711026012.7
10273.0323.844546.111632112.7
12323.8381.052049.312937512.7
14355.6412.858552.414142512.7
16406.4469.965055.614448312.7
18457.0533.471058.815753312.7
20508.0584.277562.016058712.7
24610.0692.291568.316770212.7

ASME B16.48 Spectacle Blind Dimensions


ASME B16.48 Spectacle Blind Dimensions
NPS For (Normal Pipe Size)(O.D.) For Outside Daimeter
(A)
I.D. For (Inside Daimeter)
(B)
Center Line
(C)
Wall Thickness
(T)
Width Of Web
(W)
1/2451660338
3/4542170338
1642780338
7342906.438
83481006.438
2102611206.451
107731406.451
3133891506.464
1591021759.764
41721141909.764
51941412159.776
621916824012.776
827621930012.776
1033727336015.7102
1240632443019.1102
1444835647519.1108
1651140646022.4108
1854645758025.4114
2060350863528.4121
2471461075031.8140

We Have Recently Delivered ASME B16.5 Flange To The Following Countries:


Malaysia, United Kingdom -UK, Europe, UAE

ANSI B16.5 Flange

UAE, Malaysia, Europe, United Kingdom -UK

Philippines, Indonesia, Dammam -KSA,

Industrial Flange

Indonesia, Philippines, Dammam -KSA

Qatar, Europe, Thailand, France

D Table Flange

Thailand, Qatar, Europe, France

Bangladesh, Germany, Finland, USA

High Pressure Pipe Flange

Germany, Bangladesh, Finland, USA

South Africa, Brazil, Saudi Arabia (KSA), Kuwait

Flange Used In Oil And Gas Industry

Brazil, South Africa, Saudi Arabia (KSA), Kuwait

Australia, Nigeria, Turkey, UK, Belgium, Egypt

Forged Flange

Nigeria, Australia, Turkey, UK, Belgium, Egypt

Hong Kong, Spain, Oman, Mexico, Poland, Japan

ASME B16.5 Pipe Flange

Spain, Hong Kong, Oman, Mexico, Poland, Japan

Iran, Italy, Chile, Singapore, Canada, China

ANSI Flange Standard

Chile, Iran, Italy, Singapore, Canada, China