Fittings made up of various metals and alloys are easily available in the market. However, selecting the right one depends upon the need of the application. Inconel 600 Pipe Fittings are a type of fittings that are easy to form and are strengthened and hardened through cold working. ASTM B564 Inconel Fittings manufacturer In India recommends these fittings due to their ability to resist general corrosion and high strength. WPNCI Elbow is a variety of these fittings that are used to change the direction of the pipe and are easy to weld and conform. WPNCI Reducing Tee offers resistance to chloride crevice corrosion and pitting.
UNS N06600 Inconel 600 Buttweld Fittings offer resistance to sulfide stress corrosion cracking as well as chloride stress corrosion cracking. These Nickel Alloy 600 Stub End can manage stress corrosion cracking as well as alkaline solution thus making these fittings eligible to be used in the nuclear and chemical industry. Werkstoff Nr. 2.4816 Reducer also offer resistance to oxidation at higher temperature as well as organic and inorganic acids. WPNCI Reducer also offers good metallurgical stability and rupture strength with a melting point of 1413 degrees C.
ASME B366 N06600 Inconel Alloy 600 Seamless Fittings offer good mechanical properties and can be used in cryogenic as well as at high temperatures. Inconel 600 Tube Fittings are used in various industries such as gas turbine components, heat treating industry, chemical industry, aerospace, and food processing industry. Moreover, these Alloy 600 Welded Fittings are also used in the pulp and paper industry along with nuclear engineering. We have been using modern technology to manufacture these B366 Inconel Pipe Fittings that have helped us to produce them on large scale and cater to a large ogre without any delay and at an affordable price.
Grade | C | Ni | Cr | Mn | Si | S | Cu | Fe |
Inconel 600 Pipe Fittings | 0.15 (maximum) | 72.00 (minimum) | 14.00 – 17.00 | 1.00 (maximum) | 0.50 (maximum) | 0.015(maximum) | 0.50 (maximum) | 6.00 – 10.00 |
Yield Strength (0.2%Offset) | Psi – 45,000 | MPa – 310 |
---|
Element | Tensile Strength | Density | Melting Point | Yield Strength (0.2%Offset) | Elongation |
Inconel 600 Pipe Fittings | Psi – 95,000 , MPa – 655 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 45,000 , MPa – 310 | 40 % |
Tensile Strength | Psi – 95,000 | MPa – 655 |
---|
Melting Point | 1413 °C (2580 °F) |
---|
Density | 8.47 g/cm3 |
---|
Type Of Fitting | Size | SCH | Material | Price In INR (India) Per Piece |
---|---|---|---|---|
Inconel 600 Tee | 1/2" | Schedule 40 | Inconel 600 | 186.00 |
- | 3/4" | Schedule 40 | - | 253.00 |
- | 3/1" | Schedule 40 | - | 385.00 |
- | 2" | Schedule 40 | - | 498.00 |
- | 3" | Schedule 40 | - | 598.00 |
Equal Tee | 4" | Schedule 40 | - | 612.00 |
Inconel 600 Elbow | 3/4" | SCH 40 | Inconel 600 | 164.00 |
90 Deg Elbow | 1" | SCH 40 | - | 264.00 |
- | 2" | SCH 40 | - | 354.00 |
- | 3" | SCH 40 | - | 432.00 |
- | 4" | SCH 40 | - | 598.00 |
- | 5" | SCH 40 | - | 762.00 |
90 Deg Elbow | 6" | SCH 40 | - | 898.00 |
Inconel 600 Cap | 1/2" | Schedule 40 | - | 200.00 |
End Cap | 3/4" | Schedule 40 | - | 354.00 |
- | 1" | Schedule 40 | - | 499.00 |
- | 1 1/4" | Schedule 40 | - | 610.00 |
End Cap | 2" | Schedule 40 | - | 798.00 |
Inconel 600 Reducer | 3/4 X 1/2 | SCH 160 | Inconel 600 | 176.00 |
Concentric Reducer | 1 X 1/2" | SCH 160 | - | 273.00 |
- | 4 X 2" | SCH 160 | - | 384.00 |
- | 5 X 4" | SCH 40 | - | 486.00 |
Concentric Reducer | 6 X 4" | SCH 80 | Inconel 600 | 1022.00 |
PDO Approved Inconel Fittings Manufacturers In India. For final Inconel 600 Pipe Fittings Price List Please Call on +91-9987870874 or drop an Email to info@fastwell.in.
NPS Of Equal Tee | Outside Daimeter (O.D.) at bevel | Center-to-End | |
---|---|---|---|
(C) Run | (M) Outlet | ||
1/2" | 21.3 | 25 | 25 |
3/4" | 26.7 | 29 | 29 |
1" | 33.4 | 38 | 38 |
1 1/4" | 42.2 | 48 | 48 |
1 1/2" | 48.3 | 57 | 57 |
2" | 60.3 | 64 | 64 |
2 1/2" | 73.0 | 76 | 76 |
3" | 88.9 | 86 | 86 |
3 1/2" | 101.6 | 95 | 95 |
4" | 114.3 | 105 | 105 |
5" | 141.3 | 124 | 124 |
6" | 168.3 | 143 | 143 |
8" | 219.1 | 178 | 178 |
10" | 273.0 | 216 | 216 |
12" | 323.8 | 254 | 254 |
14" | 355.6 | 279 | 279 |
16" | 406.4 | 305 | 305 |
18" | 457.0 | 343 | 343 |
20" | 508.0 | 381 | 381 |
22" | 559.0 | 419 | 419 |
24" | 610.0 | 432 | 432 |
Manufacturer Specifications | Inconel 600 Pipe Fittings |
---|---|
Common Type Of Inconel 600 Fittings | Pipe Bend/ Tee/ Elbow/ End Cap/ Stub End/ Reducer |
Chemical Composition | Nickel (≥72.0), Chromium (14.0-17.0), Iron (6.00-10.00), Carbon (≤0.15) Etc. |
UNS Number Of Inconel Buttweld Fitting | UNS N06600 |
Werkstoff Nummer | Werkstoff Nr. 2.4816 |
Standard & Dimensions | ASME/ANSI B16.11/ ISO/ EN/ NPT/ BS/ JIS/ DIN/ ASME B16.28/ MSS-SP-43/ ASME/ANSI B16.9 |
Pressure Rating | 150LB To 600LB |
Wall Thickness | SCH 20S To SCH 180 |
Forging Methods | Welded, ButtWeld, Seamless |
Size Chart | 1/2" To 18 Inch |
Inconel 600 Fittings
Kuwait, Brazil, South Africa, Saudi Arabia (KSA)
Inconel 600 Pipe Fittings
Australia, Turkey, Nigeria, Egypt, UK, Belgium
Inconel Fittings
Mexico, Hong Kong, Oman, Spain, Poland, Japan
Inconel Buttweld Pipe Fittings
Canada, Chile, Italy, Iran, Singapore, China
Inconel Threaded Fittings
Malaysia, Europe, United Kingdom -UK, UAE
Inconel 600 Elbow
Philippines, Dammam -KSA, Indonesia
WPNCI Reducing Tee
Qatar, France, Thailand, Europe
Nickel Alloy 600 Welded Fitting
Bangladesh, Germany, USA, Finland
Normal Size Of Pipe | Outside Dai Of (D) | 90 degree (Long Radius) Center-to-End (A) | 45 degree (Long Radius) Center-to-End (B) | 90 degree (3D) Center-to-End (A) | 45 degree (3D) Center-to-End (B) |
1/2 | 21.3 | 38 | 16 | – | – |
3/4 | 26.7 | 38 | 19 | 57 | 24 |
1 | 33.4 | 38 | 22 | 76 | 31 |
1¼ | 42.2 | 48 | 25 | 95 | 39 |
1½ | 48.3 | 57 | 29 | 114 | 47 |
2 | 60.3 | 76 | 35 | 152 | 63 |
2½ | 73 | 95 | 44 | 190 | 79 |
3 | 88.9 | 114 | 51 | 229 | 95 |
3½ | 101.6 | 133 | 57 | 267 | 111 |
4 | 114.3 | 152 | 64 | 305 | 127 |
5 | 141.3 | 190 | 79 | 381 | 157 |
6 | 168.3 | 229 | 95 | 457 | 189 |
8 | 219.1 | 305 | 127 | 610 | 252 |
10 | 273 | 381 | 159 | 762 | 316 |
12 | 323.8 | 457 | 190 | 914 | 378 |
14 | 355.6 | 533 | 222 | 1067 | 441 |
16 | 406.4 | 610 | 254 | 1219 | 505 |
18 | 457 | 686 | 286 | 1372 | 568 |
20 | 508 | 762 | 318 | 1524 | 632 |
22 | 559 | 838 | 343 | 1676 | 694 |
24 | 610 | 914 | 381 | 1829 | 757 |
26 | 660 | 991 | 406 | 1981 | 821 |
28 | 711 | 1067 | 438 | 2134 | 883 |
30 | 762 | 1143 | 470 | 2286 | 964 |
32 | 813 | 1219 | 502 | 2438 | 1010 |
34 | 864 | 1295 | 533 | 2591 | 1073 |
36 | 914 | 1372 | 565 | 2743 | 1135 |
38 | 965 | 1448 | 600 | 2896 | 1200 |
40 | 1016 | 1524 | 632 | 3048 | 1264 |
42 | 1067 | 1600 | 660 | 3200 | 1326 |
44 | 1118 | 1676 | 695 | 3353 | 1389 |
46 | 1168 | 1753 | 727 | 3505 | 1453 |
48 | 1219 | 1829 | 759 | 3658 | 1516 |
RCD Reiso Code | BIG Ø | SMALL Ø | Hight (H) MM | Theoretical Weight In KG (Kilogram) | ||||
---|---|---|---|---|---|---|---|---|
(DN) | (D) MM | Thickness Of (S) In MM. | (DN) | (D) MM | Thickness Of (S) MM | |||
27 21 | 3/4 | 26.9 | 2.3 | 1/2 | 21.3 | 2.0 | 38 | 0.08 |
33 21 | 1 | 33.7 | 2.6 | 1/2 | 21.3 | 2.0 | 50 | 0.09 |
33 27 | 3/4 | 26.9 | 2.3 | 0.09 | ||||
42 21 | 1"1/4 | 42.4 | 2.6 | 1/2 | 21.3 | 2.0 | 50 | 0.12 |
42 27 | 3/4 | 26.9 | 2.3 | 0.13 | ||||
42 33 | 1 | 33.7 | 2.6 | 0.14 | ||||
*48 21 | 1"1/2 | 48.3 | 2.6 | 1/2 | 21.3 | 2.0 | 64 | 0.18 |
48 27 | 3/4 | 26.9 | 2.3 | 0.19 | ||||
48 33 | 1 | 33.7 | 2.6 | 0.20 | ||||
48 42 | 1"1/4 | 42.4 | 2.6 | 0.20 | ||||
60 27 | 2 | 60.3 | 2.9 | 3/4 | 26.9 | 2.3 | 76 | 0.30 |
60 33 | 1 | 33.7 | 2.6 | 0.31 | ||||
60 42 | 1"1/4 | 42.4 | 2.6 | 0.32 | ||||
60 48 | 1"1/2 | 48.3 | 2.6 | 0.33 | ||||
76 33 | 2"1/2 | 76.1 | 2.9 | 1 | 33.7 | 2.6 | 90 | 0.40 |
76 42 | 1"1/4 | 42.4 | 2.6 | 0.47 | ||||
76 48 | 1"1/2 | 48.3 | 2.6 | 0.48 | ||||
76 60 | 2 | 60.3 | 2.6 | 0.49 | ||||
89 42 | 3 | 88.9 | 3.2 | 1"1/4 | 42.4 | 2.6 | 90 | 0.55 |
89 48 | 1"1/2 | 48.3 | 2.6 | 0.61 | ||||
89 60 | 2 | 60.3 | 2.9 | 0.62 | ||||
89 76 | 2"1/2 | 76.1 | 2.9 | 0.63 | ||||
114 48 | 4 | 114.3 | 3.6 | 1"1/2 | 48.3 | 2.6 | 100 | 0.85 |
114 60 | 2 | 60.3 | 2.9 | 0.98 | ||||
114 76 | 2"1/2 | 76.1 | 2.9 | 1.00 | ||||
114 89 | 3 | 88.9 | 3.2 | 1.02 | ||||
139 60 | 5 | 139.7 | 4.0 | 2 | 60.3 | 2.9 | 127 | 1.60 |
139 76 | 2"1/2 | 76.1 | 2.9 | 1.70 | ||||
139 89 | 3 | 88.9 | 3.2 | 1.74 | ||||
139 114 | 4 | 114.3 | 3.6 | 1.76 | ||||
*168 76 | 6 | 168.3 | 4.5 | 2"1/2 | 76.1 | 2.9 | 140 | 2.60 |
168 89 | 3 | 88.9 | 3.2 | 2.70 | ||||
168 114 | 4 | 114.3 | 3.6 | 2.82 | ||||
168 139 | 5 | 139.7 | 4.0 | 2.94 | ||||
219 114 | 8 | 219.1 | 6.3 | 4 | 114.3 | 3.6 | 152 | 5.03 |
219 139 | 5 | 139.7 | 4.0 | 5.12 | ||||
219 168 | 6 | 168.3 | 4.5 | 5.18 | ||||
*273 114 | 10 | 273.0 | 6.3 | 4 | 114.3 | 3.6 | 178 | 7.00 |
*273 139 | 5 | 139.7 | 4.0 | 7.20 | ||||
273 168 | 6 | 168.3 | 4.5 | 7.40 | ||||
273 219 | 8 | 219.1 | 6.3 | 7.55 | ||||
323 168 | 12 | 323.9 | 7.1 | 6 | 168.3 | 4.5 | 203 | 11.00 |
323 219 | 8 | 219.1 | 6.3 | 11.10 | ||||
323 273 | 10 | 273 | 6.3 | 11.20 |
Inconel 600 Coupling
600 Inconel Pipe Nipples
Alloy Inconel 600 Union
2.4816 Inconel Plug
600 Nickel Alloy Swage Nipple
UNS N06600 Bushing
O.D. (Outside Daimeter) And I.D. (Inside Daimeter) | Equivalent List | Diameter Of Nominal Pipe | Threads Size In Inches |
5/16 | 0.313 | 1/16 | 27 |
13/32 | 0.405 | 1/8 | 27 |
35/64 | 0.540 | 1/4 | 18 |
43/64 | 0.675 | 3/8 | 18 |
27/32 | 0.840 | 1/2 | 14 |
1-3/64 | 1.050 | 3/4 | 14 |
1-5/16 | 1.315 | 1 | 11-1/2 |
1-21/32 | 1.660 | 1-1/4 | 11-1/2 |
1-29/32 | 1.900 | 1-1/2 | 11-1/2 |
2-3/8 | 2.375 | 2 | 11-1/2 |
2-7/8 | 2.875 | 2-1/2 | 8 |
3-1/2 | 3.500 | 3 | 8 |
4 | 4.000 | 3-1/2 | 8 |
4-1/2 | 4.500 | 4 | 8 |
Normal Pipe Size For (NPS) | O.D. For (Outside Daimeter) of barrel | Length Of (F) | Radius Of(R) | Diameter Of (G) | ||
---|---|---|---|---|---|---|
(Min.) | (Max.) | ASME B16.9 Long Pattern | ASME B16.9 Short Pattern | |||
1/2″ | 20.5 | 22.8 | 76 | 51 | 3 | 35 |
3/4″ | 25.9 | 28.1 | 76 | 51 | 3 | 43 |
1″ | 32.6 | 35.0 | 102 | 51 | 3 | 51 |
1 1/4″ | 41.4 | 43.6 | 102 | 51 | 5 | 64 |
1 1/2″ | 47.5 | 49.9 | 102 | 51 | 6 | 74 |
2″ | 59.5 | 62.4 | 152 | 64 | 8 | 92 |
2 1/2″ | 72.2 | 75.3 | 152 | 64 | 8 | 105 |
3″ | 88.1 | 91.3 | 152 | 64 | 10 | 127 |
3 1/2″ | 100.8 | 104.0 | 152 | 76 | 10 | 140 |
4″ | 113.5 | 116.7 | 152 | 76 | 11 | 157 |
5″ | 140.5 | 144.3 | 203 | 76 | 11 | 186 |
6″ | 167.5 | 171.3 | 203 | 89 | 13 | 216 |
8″ | 218.3 | 222.1 | 203 | 102 | 13 | 270 |
10″ | 272.3 | 277.2 | 254 | 127 | 13 | 324 |
12″ | 323.1 | 328.0 | 254 | 152 | 13 | 381 |
14″ | 354.8 | 359.9 | 305 | 152 | 13 | 413 |
16″ | 405.6 | 411.0 | 305 | 152 | 13 | 470 |
18″ | 456.0 | 462.0 | 305 | 152 | 13 | 533 |
20″ | 507.0 | 514.0 | 305 | 152 | 13 | 584 |
22″ | 558.0 | 565.0 | 305 | 152 | 13 | 641 |
24″ | 609.0 | 616.0 | 305 | 152 | 13 | 692 |
NPS Of Pipe Cap | O.D. (Outside Daimeter) Of D | Length Of (H) | Length Of (H1) |
1/2 | 21.3 | 25 | 25 |
3/4 | 26.7 | 25 | 25 |
1 | 33.4 | 38 | 38 |
1.1/4 | 42.2 | 38 | 38 |
1.1/2 | 48.3 | 38 | 38 |
2 | 60.3 | 38 | 44 |
2.1/2 | 73 | 38 | 51 |
3 | 88.9 | 51 | 64 |
3.1/2 | 101.6 | 64 | 76 |
4 | 114.3 | 64 | 76 |
5 | 141.3 | 76 | 89 |
6 | 168.3 | 89 | 102 |
8 | 219.1 | 102 | 127 |
10 | 273 | 127 | 152 |
12 | 323.8 | 152 | 178 |
14 | 355.6 | 165 | 191 |
16 | 406.4 | 178 | 203 |
18 | 457 | 203 | 229 |
20 | 508 | 229 | 254 |
22 | 559 | 254 | 254 |
24 | 610 | 267 | 305 |
26 | 660 | 267 | … |
28 | 711 | 267 | … |
30 | 762 | 267 | … |
32 | 813 | 267 | … |
34 | 864 | 237 | … |
36 | 914 | 267 | … |
38 | 965 | 305 | … |
40 | 1016 | 305 | … |
42 | 1067 | 305 | … |
44 | 1118 | 343 | … |
46 | 1168 | 343 | … |
48 | 1219 | 343 | … |
Size | NPS | Daimeter Of Socket Weld Bore (B) | Bore Diameter of Socket Weld Fitting(2) D | Socket Wall (Thickness1) C | Body Thickness G | Depth of Socket Weld Fitting (Minimum) (J) | |||||
---|---|---|---|---|---|---|---|---|---|---|---|
Class Fitting Designation | Class Fitting Designation | ||||||||||
Designation | Class 3000# | Class 6000# | Class 3000# | Class 6000# | |||||||
Class 3000 | Class 6000 | Available | (Min.) | Available | (Min.) | (Min.) | (Min.) | ||||
6 | 1/8 | 11.2 10.8 | 7.6 6.1 | 7.6 6.1 | 3.18 | 3.18 | 3.96 | 3.43 | 2.41 | 3.15 | 9.5 |
8 | 1/4 | 14.6 14.2 | 10.0 8.5 | 10.0 8.5 | 3.78 | 3.30 | 4.60 | 4.01 | 3.02 | 3.68 | 9.5 |
10 | 3/8 | 18 17.6 | 13.3 11.8 | 13.3 11.8 | 4.01 | 3.50 | 5.03 | 4.37 | 3.20 | 4.01 | 9.5 |
15 | 1/2 | 22.2 21.8 | 16.6 15.0 | 16.6 15.0 | 4.67 | 4.09 | 5.97 | 5.18 | 3.73 | 4.78 | 9.5 |
20 | 3/4 | 27.6 27.2 | 21.7 20.2 | 21.7 20.2 | 4.90 | 4.27 | 6.96 | 6.04 | 3.91 | 5.56 | 12.5 |
25 | 1 | 34.3 33.9 | 27.4 25.9 | 27.4 25.9 | 5.69 | 4.98 | 7.92 | 6.93 | 4.55 | 6.35 | 12.5 |
32 | 1-1/4 | 43.1 42.7 | 35.8 34.3 | 35.8 34.3 | 6.07 | 5.28 | 7.92 | 6.93 | 4.85 | 6.35 | 12.5 |
40 | 1-1/2 | 49.2 48.8 | 41.6 40.1 | 41.6 40.1 | 6.35 | 5.54 | 8.92 | 7.80 | 5.08 | 7.14 | 12.5 |
50 | 2 | 61.7 61.2 | 53.3 51.7 | 53.3 51.7 | 6.93 | 6.04 | 10.92 | 9.50 | 5.54 | 8.74 | 16.0 |
65 | 2-1/2 | 74.4 73.9 | 64.2 61.2 | 64.2 61.2 | 8.76 | 7.67 | 7.01 | 16.0 | |||
80 | 3 | 90.3 89.8 | 79.4 76.4 | 79.4 76.4 | 9.52 | 8.30 | 7.62 | 16.0 | |||
100 | 4 | 115.7 115.2 | 103.8 100.7 | 103.8 100.7 | 10.69 | 9.35 | 8.56 | 16.0 |
Normal Pipe Size For (NPS) | Outside Daimeter For (O.D.) | Buttweld 90 Deg Elbow | Buttweld 45 Deg Elbow | Buttweld Return 180 Deg Elbow | ||||
---|---|---|---|---|---|---|---|---|
(In Inches) | Buttweld LR Elbow | Buttweld SR Elbow | Buttweld LR Elbow | Buttweld LR Elbow | ||||
(MM/ millimeter) | (Inches/ inch.) | Center to Face (In Inch) | Center to Face (In Inch) | Center to Face (In Inch) | Radius (In Inch) | Center to Center (In Inch) | Back to face (In Inch) | |
1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
Normal Pipe Size For (NPS) | Outside Daimeter For (O.D.) | ASME/ANSI B16.9 BW End Cap | ASME/ANSI B16.9 BW Straight Tee | ASME/ANSI B16.9 BW Straight Cross | ASME B16.9 BW Stub Ends | |||
---|---|---|---|---|---|---|---|---|
(Inches/ inch.) | (MM/ millimeter) | (Inch.) | Length (Inch.) | Center to End (Inch.) | Center to End (Inch.) | Lap Diameter (Inch.) | Long Length (Inch.) | Short Length (Inch.) |
1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Normal Pipe Size For (NPS) For ANSI/ASME B16.9 | 10S Schedule | 40S Schedule | 80S Schedule | ||||||
Buttweld 90 Degree Elbow | Buttweld 45 Degree Elbow | B16.9 Buttweld Equal Tee | Buttweld 90 Deg Elbows | Buttweld 45 Deg Elbows | B16.9 Buttweld Equal Tee | Buttweld 90 Degree Elbow | Buttweld 45 Degree Elbow | ASME B16.9 Buttweld Equal Tee | |
8 | 0.02 | 0.01 | 0.03 | 0.03 | 0.02 | 0.06 | 0.04 | 0.03 | 0.07 |
10 | 0.03 | 0.02 | 0.05 | 0.03 | 0.02 | 0.03 | 0.06 | 0.04 | 0.09 |
15 | 0.06 | 0.03 | 0.09 | 0.08 | 0.04 | 0.10 | 0.10 | 0.05 | 0.14 |
20 | 0.07 | 0.03 | 0.13 | 0.08 | 0.04 | 0.17 | 0.11 | 0.05 | 0.20 |
25 | 0.14 | 0.08 | 0.28 | 0.15 | 0.11 | 0.29 | 0.22 | 0.14 | 0.38 |
32 | 0.23 | 0.11 | 0.49 | 0.26 | 0.17 | 0.59 | 0.40 | 0.23 | 0.68 |
40 | 0.30 | 0.17 | 0.68 | 0.40 | 0.23 | 0.86 | 0.51 | 0.29 | 1.02 |
50 | 0.50 | 0.25 | 0.85 | 0.70 | 0.4 | 1.28 | 0.91 | 0.59 | 1.59 |
65 | 0.85 | 0.48 | 1.41 | 1.40 | 0.77 | 2.19 | 1.81 | 0.99 | 3.13 |
80 | 1.25 | 0.63 | 1.77 | 2.20 | 1.08 | 3.31 | 2.97 | 1.50 | 4.45 |
90 | 1.70 | 0.75 | 2.67 | 2.83 | 1.42 | 4.08 | 4.00 | 2.00 | 5.44 |
100 | 2.10 | 1.08 | 3.46 | 4.47 | 2.09 | 5.27 | 6.18 | 2.81 | 7.71 |
150 | 5.45 | 2.72 | 8.07 | 10.89 | 5.44 | 10.99 | 16.32 | 8.16 | 13.61 |
200 | 10.20 | 5.33 | 15.65 | 21.54 | 10.77 | 20.91 | 33.11 | 16.56 | 28.12 |
250 | 18.15 | 9.75 | 26.46 | 38.56 | 19.27 | 35.38 | 51.71 | 25.86 | 49.90 |
300 | 25.80 | 13.62 | 39.46 | 59.42 | 29.71 | 62.14 | 79.38 | 39.69 | 83.91 |
Normal Pipe Size For (NPS) For ANSI/ ASME B16.9 | 10S Schedule | 40S Schedule | 80S Schedule | ||||||
Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | |
40x.25 | 0.19 | 0.19 | 0.60 | 0.26 | 0.26 | 0.76 | 0.34 | 0.34 | 0.90 |
50x25 | 0.28 | 0.28 | 0.73 | 0.40 | 0.40 | 1.10 | 0.54 | 0.54 | 1.37 |
50x40 | 0.31 | 0.31 | 0.76 | 0.45 | 0.45 | 1.15 | 0.59 | 0.59 | 1.43 |
80x.50 | 0.55 | 0.55 | 1.56 | 1.00 | 1.00 | 2.91 | 1.79 | 1.79 | 3.91 |
100x50 | 0.78 | 0.78 | 2.94 | 1.50 | 1.50 | 4.48 | 1.95 | 1.95 | 6.55 |
100x80 | 0.87 | 0.87 | 3.04 | 1.74 | 1.74 | 4.64 | 2.33 | 2.33 | 6.79 |
150x80 | 1.82 | 1.82 | 6.86 | 3.95 | 3.95 | 9.68 | 5.51 | 5.51 | 11.57 |
150x100 | 1.96 | 1.96 | 7.10 | 4.07 | 4.07 | 11.94 | 5.96 | 5.96 | 11.97 |
200x100 | 3.01 | 3.01 | 13.46 | 6.55 | 6.55 | 17.98 | 9.23 | 9.23 | 24.18 |
200x150 | 3.19 | 3.19 | 14.08 | 6.74 | 6.74 | 18.82 | 10.12 | 10.12 | 25.31 |
Alloy Inconel 600 Elbow
600 Nickel Tee
2.4816 Inconel Stub End
B366 Gr.WPNCl Reducer
ASTM B366 WPNCl End Cap
ASTM B366 Grade WPNCl Pipe Bend
Inconel 600 Grade Concentric Reducer
ASTM B366 WPNCl Reducing Tee
WPNCl 90 Degree Elbow
ASTM B366 UNS N06600 Eccentric Reducer
Inconel 600 Din 2 4816 Equal Tee
Alloy 600 Nickel Long Radius Elbow
Specific Heat | |
---|---|
Btu/lb-°F | J/kg-°C |
0.106 | 444.00 |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Inconel 600 Pipe Fittings | 2.4816 | N06600 | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe |
Density | Melting Range | Specific Heat | Curie Temperature | Electrical Resistivity | |||||
lb/in3 | Mg/m3 | °F | °C | Btu/lb-°F | J/kg-°C | °F | °C | mil/ft | μΩ-m |
0.306 | 8.47 | 2470-2575 | 1354-1413 | 0.106 | 444.00 | -192 | -124 | 620 | 1.03 |
+91-9987870874
info@fastwell.in
Shop No. 17/B1, Ground Floor Abbas Bldg. Wing A, Jalbhai Street, Near Cama Baug Khetwadi, Grant Road (E) Mumbai – 400004. India