Fittings made in factories belong to various grades that belong to different metals and alloys. One such nickel base pipe fitting made with 625 grade is the Inconel 625 Pipe Fittings. They can be used at different pressures and temperatures and also display resistance to corrosion. As per Inconel 625 Elbow manufacturers In India recommend these fittings in the field of chemical processing. It provides ease of fabrication and does not need to undergo precipitation hardening treatment. These WPNCMC Reducers are widely used in marine engineering applications.
Nickel Alloy 625 Buttweld Fittings can survive in corrosive environments where conventional fittings might give up to oxidation corrosion or carburization. UNS N06625 Equal Tees are preferred for marine engineering as they can resist sea and brine solutions along with resisting oxidation and carburization. WPNCMC Stub End is also resistant to local crevice corrosion and pitting. Furthermore, these Inconel 625 Tube Fittings also resist chloride ion stress corrosion cracking along with exhibiting high fatigue strength. Even at high temperatures these fittings resist scaling.
Werkstoff Nr. 2.4856 End Cap are non-magnetic in nature and have good fatigue strength and are therefore used in a variety of industries. ASME B366 Inconel 625 Seamless Fittings are available in the size range of ½ inch to 10 inches. Whereas the Alloy 625 Welded Fittings are available in the size range of ½ inch to 48 inches. We have been producing these fittings for generations and have been supplying them to various industries. The use of modern technology in producing these Inconel N06625 Forged Fittings has helped us in catering to large orders without any delay.
Table Of Content:
Inconel 625 Pipe Fittings Pressure Rating
Pressure ratings (psig) | |||||
---|---|---|---|---|---|
Pipe Fitting Temperature Ratings | Type Of Pressure Class | ||||
150 LBS | 300 LBS | ||||
1/4 - 1 Inches | 1 1/4 - 2 Inches | 2 1/2 - 3 Inches | |||
(oF) | (oC) | ||||
-20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
200 | 93 | 265 | 1785 | 1350 | 910 |
250 | 121 | 225 | 1575 | 1200 | 825 |
300 | 149 | 185 | 1360 | 1050 | 735 |
350 | 177 | 150 | 1150 | 900 | 650 |
400 | 204 | - | 935 | 750 | 560 |
450 | 232 | - | 725 | 600 | 475 |
500 | 260 | - | 510 | 450 | 385 |
550 | 288 | - | 300 | 300 | 300 |
Inconel 625 Fittings Price List
Type Of Fitting | Size | SCH | Material | Price In INR (India) Per Piece |
---|---|---|---|---|
Inconel 625 Elbow | 3/4" | SCH 40 | Inconel 625 | 198.00 |
90 Deg Elbow | 1" | SCH 40 | - | 345.00 |
- | 2" | SCH 40 | - | 423.00 |
- | 3" | SCH 40 | - | 500.00 |
- | 4" | SCH 40 | - | 634.00 |
- | 5" | SCH 40 | - | 800.00 |
90 Deg Elbow | 6" | SCH 40 | - | 953.00 |
Inconel 625 Tee | 1/2" | Schedule 40 | Inconel 625 | 200.00 |
- | 3/4" | Schedule 40 | - | 323.00 |
- | 3/1" | Schedule 40 | - | 400.00 |
- | 2" | Schedule 40 | - | 534.00 |
- | 3" | Schedule 40 | - | 645.00 |
Equal Tee | 4" | Schedule 40 | - | 756.00 |
Inconel 625 Cap | 1/2" | Schedule 40 | - | 323.00 |
End Cap | 3/4" | Schedule 40 | - | 399.00 |
- | 1" | Schedule 40 | - | 545.00 |
- | 1 1/4" | Schedule 40 | - | 698.00 |
End Cap | 2" | Schedule 40 | - | 867.00 |
Inconel 625 Reducer | 3/4 X 1/2 | SCH 160 | Inconel 625 | 394.00 |
Concentric Reducer | 1 X 1/2" | SCH 160 | - | 578.00 |
- | 4 X 2" | SCH 160 | - | 678.00 |
- | 5 X 4" | SCH 40 | - | 876.00 |
Concentric Reducer | 6 X 4" | SCH 80 | Inconel 625 | 1238.00 |
One Of The Top Manufacturer Of Inconel 625 Pipe Fittings In India. For final Alloy 625 Buttweld Elbow Price List Please Call on +91-9987870874 or drop an Email to info@fastwell.in.
Test Certificates
Standard Dimensions Of Alloy 625 Fittings
Normal Pipe Size For (NPS) | Outside Daimeter For (O.D.) | Buttweld 90 Deg Elbow | Buttweld 45 Deg Elbow | Buttweld Return 180 Deg Elbow | ||||
---|---|---|---|---|---|---|---|---|
(In Inches) | Buttweld LR Elbow | Buttweld SR Elbow | Buttweld LR Elbow | Buttweld LR Elbow | ||||
(MM/ millimeter) | (Inches/ inch.) | Center to Face (In Inch) | Center to Face (In Inch) | Center to Face (In Inch) | Radius (In Inch) | Center to Center (In Inch) | Back to face (In Inch) | |
1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
Normal Pipe Size For (NPS) | Outside Daimeter For (O.D.) | ASME/ANSI B16.9 BW End Cap | ASME/ANSI B16.9 BW Straight Tee | ASME/ANSI B16.9 BW Straight Cross | ASME B16.9 BW Stub Ends | |||
---|---|---|---|---|---|---|---|---|
(Inches/ inch.) | (MM/ millimeter) | (Inch.) | Length (Inch.) | Center to End (Inch.) | Center to End (Inch.) | Lap Diameter (Inch.) | Long Length (Inch.) | Short Length (Inch.) |
1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
B366 Wpncmc Threaded Fittings Dimensions
625 Inconel Socket Weld Fittings Dimensions
Size | NPS | Daimeter Of Socket Weld Bore (B) | Bore Diameter of Socket Weld Fitting(2) D | Socket Wall (Thickness1) C | Body Thickness G | Depth of Socket Weld Fitting (Minimum) (J) | |||||
---|---|---|---|---|---|---|---|---|---|---|---|
Class Fitting Designation | Class Fitting Designation | ||||||||||
Designation | Class 3000# | Class 6000# | Class 3000# | Class 6000# | |||||||
Class 3000 | Class 6000 | Available | (Min.) | Available | (Min.) | (Min.) | (Min.) | ||||
6 | 1/8 | 11.2 10.8 | 7.6 6.1 | 7.6 6.1 | 3.18 | 3.18 | 3.96 | 3.43 | 2.41 | 3.15 | 9.5 |
8 | 1/4 | 14.6 14.2 | 10.0 8.5 | 10.0 8.5 | 3.78 | 3.30 | 4.60 | 4.01 | 3.02 | 3.68 | 9.5 |
10 | 3/8 | 18 17.6 | 13.3 11.8 | 13.3 11.8 | 4.01 | 3.50 | 5.03 | 4.37 | 3.20 | 4.01 | 9.5 |
15 | 1/2 | 22.2 21.8 | 16.6 15.0 | 16.6 15.0 | 4.67 | 4.09 | 5.97 | 5.18 | 3.73 | 4.78 | 9.5 |
20 | 3/4 | 27.6 27.2 | 21.7 20.2 | 21.7 20.2 | 4.90 | 4.27 | 6.96 | 6.04 | 3.91 | 5.56 | 12.5 |
25 | 1 | 34.3 33.9 | 27.4 25.9 | 27.4 25.9 | 5.69 | 4.98 | 7.92 | 6.93 | 4.55 | 6.35 | 12.5 |
32 | 1-1/4 | 43.1 42.7 | 35.8 34.3 | 35.8 34.3 | 6.07 | 5.28 | 7.92 | 6.93 | 4.85 | 6.35 | 12.5 |
40 | 1-1/2 | 49.2 48.8 | 41.6 40.1 | 41.6 40.1 | 6.35 | 5.54 | 8.92 | 7.80 | 5.08 | 7.14 | 12.5 |
50 | 2 | 61.7 61.2 | 53.3 51.7 | 53.3 51.7 | 6.93 | 6.04 | 10.92 | 9.50 | 5.54 | 8.74 | 16.0 |
65 | 2-1/2 | 74.4 73.9 | 64.2 61.2 | 64.2 61.2 | 8.76 | 7.67 | 7.01 | 16.0 | |||
80 | 3 | 90.3 89.8 | 79.4 76.4 | 79.4 76.4 | 9.52 | 8.30 | 7.62 | 16.0 | |||
100 | 4 | 115.7 115.2 | 103.8 100.7 | 103.8 100.7 | 10.69 | 9.35 | 8.56 | 16.0 |
We Supplied A Comprehensive Range Of Inconel 625 Pipe Fittings To The Following Locations:
Inconel 625 Seamless Fitting
South Africa, Saudi Arabia (KSA), Kuwait, Brazil
Inconel 625 Fittings
Turkey, Nigeria, Australia, Egypt, UK, Belgium
ASTM B366 Wpncmc Fittings
Hong Kong, Oman, Mexico, Spain, Poland, Japan
Inconel 625 Elbows
Chile, Italy, Iran, Canada, Singapore, China
Nickel Alloy 625 Tee
Europe, United Kingdom -UK, Malaysia, UAE
Inconel 625 Buttweld Fittings
Dammam -KSA, Philippines, Indonesia
UNS N06625 Welded Fitting
France, Thailand, Qatar, Europe
Alloy 625 Fittings
Germany, USA, Bangladesh, Finland
Value Added Services
Alloy 625 Pipe Fittings Length Chart
O.D. (Outside Daimeter) And I.D. (Inside Daimeter) | Equivalent List | Diameter Of Nominal Pipe | Threads Size In Inches |
5/16 | 0.313 | 1/16 | 27 |
13/32 | 0.405 | 1/8 | 27 |
35/64 | 0.540 | 1/4 | 18 |
43/64 | 0.675 | 3/8 | 18 |
27/32 | 0.840 | 1/2 | 14 |
1-3/64 | 1.050 | 3/4 | 14 |
1-5/16 | 1.315 | 1 | 11-1/2 |
1-21/32 | 1.660 | 1-1/4 | 11-1/2 |
1-29/32 | 1.900 | 1-1/2 | 11-1/2 |
2-3/8 | 2.375 | 2 | 11-1/2 |
2-7/8 | 2.875 | 2-1/2 | 8 |
3-1/2 | 3.500 | 3 | 8 |
4 | 4.000 | 3-1/2 | 8 |
4-1/2 | 4.500 | 4 | 8 |
Schedule 40 ASME B366 Grade Wpncmc Seamless Fittings Equivalent Chart
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
---|---|---|---|---|---|---|---|
Inconel 625 Pipe Fittings | 2.4856 | N06625 | NCF 625 | NA 21 | ХН75МБТЮ | NC22DNB4M | NC22DNB4M |
Inconel 625 Chemical Composition
Element Of Inconel 625 Pipe Fittings | Content, % |
---|---|
Iron | ≤5.0 |
Molybdenum | 8.0-10.0 |
Niobium(plus Tantalum) | 3.15-4.15 |
Nickel | ≥58.0 |
Manganese | ≤0.50 |
Titanium | ≤0.40 |
Cobalt | ≤1.0 |
Chromium | 20.0-23.0 |
Carbon | ≤0.10 |
Silicon | ≤0.50 |
Phosphorus | ≤0.015 |
Sulfur | ≤0.015 |
Aluminum | ≤0.40 |
Application Of ASTM B366 Wpncmc Fittings
Types Of Inconel 625 Forged Fittings
UNS N06625 Plug
Werkstoff 2.4856 Swage Nipple
Inconel 625 Superalloy Bushing
Inconel 625 Coupling
Inconel 625 Alloy Pipe Nipples
Nickel Alloy 625 Union
ANSI/ ASME B16.9 Inconel 625 Union Casting Mechanical Properties
Element | Melting Point | Yield Strength (0.2%Offset) | Elongation | Tensile Strength | Density |
Inconel 625 Pipe Fittings |
1350 °C (2460 °F) | Psi – 75,000 , MPa – 517 | 42.5 % | Psi – 1,35,000 , MPa – 930 | 8.4 g/cm3 |
Inconel 625 Plug Tensile Strength
Tensile Strength | Psi – 1,35,000 | MPa – 930 |
---|
Material Code (N06625) Equal Tee Formula
EN 10253 Inconel 625 Coupling Yield Strength Temperature
Yield Strength (0.2%Offset) | Psi – 75,000 | MPa – 517 |
---|
Inconel 625 Melting Temperature
Melting Point | 1350 °C | (2460 °F) |
---|
MSS SP-75 Alloy 625 Nickel 45 Degree Elbow Cutting Formula
Nickel 625 Fittings Density Kg/m3 Density
Density | 8.4 g/cm3 |
---|
Alloy 625 Grade 2 Fitting Physical Properties
Density | Melting Range | Specific Heat | Permeability at 200 Oersted | Curie Temperature | |||
---|---|---|---|---|---|---|---|
lb/cu in | gram/cc | °F | °C | Btu/lb°F (J/kg°C) 70°F(21°C) |
15.9 kA/m | °F | °C |
0.305 | 8.44 | 2350-2460 | 1290-1350 | 0.098(410) | 1.0006 | <-320 | -196 |
Documentation
Inconel 625 Elbow Dimensions
Normal Size Of Pipe | Outside Dai Of (D) | 90 degree (Long Radius) Center-to-End (A) | 45 degree (Long Radius) Center-to-End (B) | 90 degree (3D) Center-to-End (A) | 45 degree (3D) Center-to-End (B) |
1/2 | 21.3 | 38 | 16 | – | – |
3/4 | 26.7 | 38 | 19 | 57 | 24 |
1 | 33.4 | 38 | 22 | 76 | 31 |
1¼ | 42.2 | 48 | 25 | 95 | 39 |
1½ | 48.3 | 57 | 29 | 114 | 47 |
2 | 60.3 | 76 | 35 | 152 | 63 |
2½ | 73 | 95 | 44 | 190 | 79 |
3 | 88.9 | 114 | 51 | 229 | 95 |
3½ | 101.6 | 133 | 57 | 267 | 111 |
4 | 114.3 | 152 | 64 | 305 | 127 |
5 | 141.3 | 190 | 79 | 381 | 157 |
6 | 168.3 | 229 | 95 | 457 | 189 |
8 | 219.1 | 305 | 127 | 610 | 252 |
10 | 273 | 381 | 159 | 762 | 316 |
12 | 323.8 | 457 | 190 | 914 | 378 |
14 | 355.6 | 533 | 222 | 1067 | 441 |
16 | 406.4 | 610 | 254 | 1219 | 505 |
18 | 457 | 686 | 286 | 1372 | 568 |
20 | 508 | 762 | 318 | 1524 | 632 |
22 | 559 | 838 | 343 | 1676 | 694 |
24 | 610 | 914 | 381 | 1829 | 757 |
26 | 660 | 991 | 406 | 1981 | 821 |
28 | 711 | 1067 | 438 | 2134 | 883 |
30 | 762 | 1143 | 470 | 2286 | 964 |
32 | 813 | 1219 | 502 | 2438 | 1010 |
34 | 864 | 1295 | 533 | 2591 | 1073 |
36 | 914 | 1372 | 565 | 2743 | 1135 |
38 | 965 | 1448 | 600 | 2896 | 1200 |
40 | 1016 | 1524 | 632 | 3048 | 1264 |
42 | 1067 | 1600 | 660 | 3200 | 1326 |
44 | 1118 | 1676 | 695 | 3353 | 1389 |
46 | 1168 | 1753 | 727 | 3505 | 1453 |
48 | 1219 | 1829 | 759 | 3658 | 1516 |
B366 Gr.WPNCMC Reducer Dimensions
RCD Reiso Code | BIG Ø | SMALL Ø | Hight (H) MM | Theoretical Weight In KG (Kilogram) | ||||
---|---|---|---|---|---|---|---|---|
(DN) | (D) MM | Thickness Of (S) In MM. | (DN) | (D) MM | Thickness Of (S) MM | |||
27 21 | 3/4 | 26.9 | 2.3 | 1/2 | 21.3 | 2.0 | 38 | 0.08 |
33 21 | 1 | 33.7 | 2.6 | 1/2 | 21.3 | 2.0 | 50 | 0.09 |
33 27 | 3/4 | 26.9 | 2.3 | 0.09 | ||||
42 21 | 1"1/4 | 42.4 | 2.6 | 1/2 | 21.3 | 2.0 | 50 | 0.12 |
42 27 | 3/4 | 26.9 | 2.3 | 0.13 | ||||
42 33 | 1 | 33.7 | 2.6 | 0.14 | ||||
*48 21 | 1"1/2 | 48.3 | 2.6 | 1/2 | 21.3 | 2.0 | 64 | 0.18 |
48 27 | 3/4 | 26.9 | 2.3 | 0.19 | ||||
48 33 | 1 | 33.7 | 2.6 | 0.20 | ||||
48 42 | 1"1/4 | 42.4 | 2.6 | 0.20 | ||||
60 27 | 2 | 60.3 | 2.9 | 3/4 | 26.9 | 2.3 | 76 | 0.30 |
60 33 | 1 | 33.7 | 2.6 | 0.31 | ||||
60 42 | 1"1/4 | 42.4 | 2.6 | 0.32 | ||||
60 48 | 1"1/2 | 48.3 | 2.6 | 0.33 | ||||
76 33 | 2"1/2 | 76.1 | 2.9 | 1 | 33.7 | 2.6 | 90 | 0.40 |
76 42 | 1"1/4 | 42.4 | 2.6 | 0.47 | ||||
76 48 | 1"1/2 | 48.3 | 2.6 | 0.48 | ||||
76 60 | 2 | 60.3 | 2.6 | 0.49 | ||||
89 42 | 3 | 88.9 | 3.2 | 1"1/4 | 42.4 | 2.6 | 90 | 0.55 |
89 48 | 1"1/2 | 48.3 | 2.6 | 0.61 | ||||
89 60 | 2 | 60.3 | 2.9 | 0.62 | ||||
89 76 | 2"1/2 | 76.1 | 2.9 | 0.63 | ||||
114 48 | 4 | 114.3 | 3.6 | 1"1/2 | 48.3 | 2.6 | 100 | 0.85 |
114 60 | 2 | 60.3 | 2.9 | 0.98 | ||||
114 76 | 2"1/2 | 76.1 | 2.9 | 1.00 | ||||
114 89 | 3 | 88.9 | 3.2 | 1.02 | ||||
139 60 | 5 | 139.7 | 4.0 | 2 | 60.3 | 2.9 | 127 | 1.60 |
139 76 | 2"1/2 | 76.1 | 2.9 | 1.70 | ||||
139 89 | 3 | 88.9 | 3.2 | 1.74 | ||||
139 114 | 4 | 114.3 | 3.6 | 1.76 | ||||
*168 76 | 6 | 168.3 | 4.5 | 2"1/2 | 76.1 | 2.9 | 140 | 2.60 |
168 89 | 3 | 88.9 | 3.2 | 2.70 | ||||
168 114 | 4 | 114.3 | 3.6 | 2.82 | ||||
168 139 | 5 | 139.7 | 4.0 | 2.94 | ||||
219 114 | 8 | 219.1 | 6.3 | 4 | 114.3 | 3.6 | 152 | 5.03 |
219 139 | 5 | 139.7 | 4.0 | 5.12 | ||||
219 168 | 6 | 168.3 | 4.5 | 5.18 | ||||
*273 114 | 10 | 273.0 | 6.3 | 4 | 114.3 | 3.6 | 178 | 7.00 |
*273 139 | 5 | 139.7 | 4.0 | 7.20 | ||||
273 168 | 6 | 168.3 | 4.5 | 7.40 | ||||
273 219 | 8 | 219.1 | 6.3 | 7.55 | ||||
323 168 | 12 | 323.9 | 7.1 | 6 | 168.3 | 4.5 | 203 | 11.00 |
323 219 | 8 | 219.1 | 6.3 | 11.10 | ||||
323 273 | 10 | 273 | 6.3 | 11.20 |
ASTM B366 UNS N06625 Stub End Dimensions
Normal Pipe Size For (NPS) | O.D. For (Outside Daimeter) of barrel | Length Of (F) | Radius Of(R) | Diameter Of (G) | ||
---|---|---|---|---|---|---|
(Min.) | (Max.) | ASME B16.9 Long Pattern | ASME B16.9 Short Pattern | |||
1/2″ | 20.5 | 22.8 | 76 | 51 | 3 | 35 |
3/4″ | 25.9 | 28.1 | 76 | 51 | 3 | 43 |
1″ | 32.6 | 35.0 | 102 | 51 | 3 | 51 |
1 1/4″ | 41.4 | 43.6 | 102 | 51 | 5 | 64 |
1 1/2″ | 47.5 | 49.9 | 102 | 51 | 6 | 74 |
2″ | 59.5 | 62.4 | 152 | 64 | 8 | 92 |
2 1/2″ | 72.2 | 75.3 | 152 | 64 | 8 | 105 |
3″ | 88.1 | 91.3 | 152 | 64 | 10 | 127 |
3 1/2″ | 100.8 | 104.0 | 152 | 76 | 10 | 140 |
4″ | 113.5 | 116.7 | 152 | 76 | 11 | 157 |
5″ | 140.5 | 144.3 | 203 | 76 | 11 | 186 |
6″ | 167.5 | 171.3 | 203 | 89 | 13 | 216 |
8″ | 218.3 | 222.1 | 203 | 102 | 13 | 270 |
10″ | 272.3 | 277.2 | 254 | 127 | 13 | 324 |
12″ | 323.1 | 328.0 | 254 | 152 | 13 | 381 |
14″ | 354.8 | 359.9 | 305 | 152 | 13 | 413 |
16″ | 405.6 | 411.0 | 305 | 152 | 13 | 470 |
18″ | 456.0 | 462.0 | 305 | 152 | 13 | 533 |
20″ | 507.0 | 514.0 | 305 | 152 | 13 | 584 |
22″ | 558.0 | 565.0 | 305 | 152 | 13 | 641 |
24″ | 609.0 | 616.0 | 305 | 152 | 13 | 692 |
DIN 2.4856 End Cap Dimensions
NPS Of Pipe Cap | O.D. (Outside Daimeter) Of D | Length Of (H) | Length Of (H1) |
1/2 | 21.3 | 25 | 25 |
3/4 | 26.7 | 25 | 25 |
1 | 33.4 | 38 | 38 |
1.1/4 | 42.2 | 38 | 38 |
1.1/2 | 48.3 | 38 | 38 |
2 | 60.3 | 38 | 44 |
2.1/2 | 73 | 38 | 51 |
3 | 88.9 | 51 | 64 |
3.1/2 | 101.6 | 64 | 76 |
4 | 114.3 | 64 | 76 |
5 | 141.3 | 76 | 89 |
6 | 168.3 | 89 | 102 |
8 | 219.1 | 102 | 127 |
10 | 273 | 127 | 152 |
12 | 323.8 | 152 | 178 |
14 | 355.6 | 165 | 191 |
16 | 406.4 | 178 | 203 |
18 | 457 | 203 | 229 |
20 | 508 | 229 | 254 |
22 | 559 | 254 | 254 |
24 | 610 | 267 | 305 |
26 | 660 | 267 | … |
28 | 711 | 267 | … |
30 | 762 | 267 | … |
32 | 813 | 267 | … |
34 | 864 | 237 | … |
36 | 914 | 267 | … |
38 | 965 | 305 | … |
40 | 1016 | 305 | … |
42 | 1067 | 305 | … |
44 | 1118 | 343 | … |
46 | 1168 | 343 | … |
48 | 1219 | 343 | … |
Inconel 625 Wpncmc Tee Dimension
NPS Of Equal Tee | Outside Daimeter (O.D.) at bevel | Center-to-End | |
---|---|---|---|
(C) Run | (M) Outlet | ||
1/2" | 21.3 | 25 | 25 |
3/4" | 26.7 | 29 | 29 |
1" | 33.4 | 38 | 38 |
1 1/4" | 42.2 | 48 | 48 |
1 1/2" | 48.3 | 57 | 57 |
2" | 60.3 | 64 | 64 |
2 1/2" | 73.0 | 76 | 76 |
3" | 88.9 | 86 | 86 |
3 1/2" | 101.6 | 95 | 95 |
4" | 114.3 | 105 | 105 |
5" | 141.3 | 124 | 124 |
6" | 168.3 | 143 | 143 |
8" | 219.1 | 178 | 178 |
10" | 273.0 | 216 | 216 |
12" | 323.8 | 254 | 254 |
14" | 355.6 | 279 | 279 |
16" | 406.4 | 305 | 305 |
18" | 457.0 | 343 | 343 |
20" | 508.0 | 381 | 381 |
22" | 559.0 | 419 | 419 |
24" | 610.0 | 432 | 432 |
ASTM Specification For Inconel 625 Buttweld Fittings
Material Specification | Inconel 625 Pipe Fittings |
---|---|
Schedule | SCH 20S Fitting To SCH 180 Fitting |
Length | 1/2" To 24" |
UNS Number | UNS N06625 Fittings |
Werkstoff Nummer | Werkstoff Nr. 2.4856 Fittings |
Contact Us Today For Buy Types Of Inconel 625 Fittings | End Cap/ Stub End/ Reducer/ Pipe Bend/ Tee/ Elbow |
Chemical Equation | Nickel (≥58.0), Chromium (20.0-23.0), Iron (≤5.0), Carbon (≤0.10), Molybdenum (8.0-10.0), Manganese (≤0.50), Silicon (≤0.50) Etc. |
Dimensions | NPT Fittings/ BS/ JIS/ DIN/ ASME B16.28/ ASME/ANSI B16.11/ ISO/ EN/ MSS-SP-43/ ASME/ANSI B16.9 Fittings |
Pressure Rating Class | 150# Fitting/ 300# Fitting/ 600# Fitting |
Inconel 625 Grade 2 Fitting Tolerance Chart
Tolerance Of Inconel 625 Pipe Fittings | |||||||
All Type Of Buttweld Fittings | 45 deg & 90 deg elbows | 180 Degree Returns | |||||
Normal Size Of Pipe (NPS) | Outside Daimeter (O.D.) at Bevel | I.D. (Inside Daimeter) at End | Thickness Of Wall (WT) t / t1 | Center to End Daimeter A-B-C-M | Center to Center Daimeter (O) | Back to Face Daimeter (K) | Align- ment of Ends (U) |
1/2 a 2 1/2 | 1 | 0,8 | Not | 2 | 7 | 7 | 1 |
3 a 3 1/2 | 1 | 1,6 | less | 2 | 7 | 7 | 1 |
4 | +2 -1 | 1,6 | than | 2 | 7 | 7 | 1 |
5 a 6 | +3 -1 | 1,6 | 87,50% | 2 | 7 | 7 | 1 |
8 | 2 | 1,6 | of nominal | 2 | 7 | 7 | 1 |
10 | +4 -3 | 3,2 | tickness | 2 | 7 | 7 | 2 |
12 a 18 | +4 -3 | 3,2 | 3 | 10 | 7 | 2 | |
20 a 24 | +6 -5 | 4,8 | 3 | 10 | 7 | 2 | |
26 a 30 | +7 -5 | 4,8 | 3 | - | - | - | - |
32 a 48 | +7 -5 | 4,8 | 5 | - | - | - | - |
Types Of Inconel 625 Pipe Fittings
Material Inconel 625 Reducer
Inconel N06625 End Cap
DIN 2.4856 Steel Pipe Bend
Inconel 625 Nickel Alloy Elbow
Inconel 625 UNS N06625 Tee
Inconel 625 Nickel Stub End
Alloy 625 Nickel Concentric Reducer
Special Metals Inconel 625 Reducing Tee
Alloy 2 4856 90 Degree Elbow
N06625 Alloy 625 Eccentric Reducer
Inconel 625 Nickel Equal Tee
Inconel 625 Nickel Alloy Long Radius Elbow
1 1/2 Inch B366 UNS N06625 Threaded Fittings Specific Heat
Btu/lb°F (J/kg°C) 70°F(21°C) |
---|
0.098(410) |
Werkstoff Nummer 2.4856 Nickel 625 Concentric Reducer Formula
Material
Our Products
Get In Touch
+91-9987870874
info@fastwell.in
Shop No. 17/B1, Ground Floor Abbas Bldg. Wing A, Jalbhai Street, Near Cama Baug Khetwadi, Grant Road (E) Mumbai – 400004. India