manufacturer and supplier Of Alloy 20 Stainless Steel Pipe Fittings In Form Of Sch 40 Buttweld Elbow And Stub End As Per ANSI/ ASME B16.9


Alloy 20 Pipe Fittings

Pipe fittings made up of various metals and alloys are available in the market. These are further divided into various grades. Alloy 20 Pipe Fittings is one such type of fitting that is highly suitable for fabrication and has good mechanical strength. Alloy 20 Stainless Steel Pipe Fittings Manufacturer In India recommends these fittings as they are resistant to acids such as nitric and phosphoric. Carpenter 20 Fittings also offer resistance to boiling 20% to 40%sulfuric acid. These UNS N08020 Equal Tees also provide resistance to crevice corrosion and pitting. 

Alloy 20 Socket Weld Fittings have been used in chemical plants, food processing, dye industries, and heat exchangers. Moreover, these Werkstoff Nr. 2.4660 Pipe Reducers are also used in mixing tanks, pickling equipment, and petrochemical plants. They tend to work smoothly even in boiling water as well as in the cryogenic temperature. ASTM B366 Alloy 20 Tube Fittings has a high density and resistance to acids and cracking. They are available in the size range of ½ inch to 24 inches. Solutions such as phosphoric, sulfuric, and nitric are also resisted by these alloys. 

Incoloy 20 End Cap has niobium added to it in trace amounts that help in stabilizing the fittings and minimizing carbide precipitation that might be caused during welding. ASME B366 Alloy 20 Seamless Fittings have high fabricability and machinability. They are therefore suitable for use in pharmaceutical and dye production. We have been supplying these fittings to our customers for a long time. The superior quality and affordable price of Alloy N08020 Forged Fittings manufactured by us has gained us the trust of our customers.



Alloy 20 Stainless Steel Equivalent


STANDARD EN AFNOR UNS WERKSTOFF NR.
Alloy 20 Pipe Fittings NiCr20CuMo Z2NCUD31-20AZ N08020 2.4660

Alloy 20 Chemical Composition


Niobium+tantalum 8*C-1.0
Managanese ≤2.00
Molybdenum 2.0-3.0
Iron Balance
Carbon ≤0.07
Nickel 32.0-38.0
Chromiun 19.0-21.0
Copper 3.0-4.0
Phosphorus ≤0.045
Sulfur ≤0.035
Silicon ≤1.00

Alloy 20 Pipe Fittings Mechanical Properties


Tensile Strength, (minimum) Yield Strength, (minimum) Elongation (minimum) Young's Modulus
Mpa ksi Mpa ksi % 103ksi Gpa
620 90 300 45 40 28 193

Incoloy 20 Fittings Physical Properties


Density Specific Heat Electrical Resistivity Thermal Conductivity
g/cm3 J/kg.°C µΩ·m W/m.°C
8.08 500 1.08 12.3

Check Price List Of MSS SP-75 Carpenter 20 Fittings And Standard Dimensions Of ANSI/ ASME B16.9 UNS N08020 Equal Tee With Weight Chart


Alloy 20 Stainless Steel Pipe Fittings Price List


Type Of Fitting Size SCH Material Price In INR (India) Per Piece
Alloy 20 Reducer 3/4 X 1/2 SCH 160 Alloy 20 634.00
Concentric Reducer 1 X 1/2" SCH 160 - 900.00
- 4 X 2" SCH 160 - 1182.00
- 5 X 4" SCH 40 - 1287.00
Concentric Reducer 6 X 4" SCH 80 Alloy 20 1378.00
Alloy 20 Elbow 3/4" SCH 40 Alloy 20 465.00
90 Deg Elbow 1" SCH 40 - 654.00
- 2" SCH 40 - 823.00
- 3" SCH 40 - 1023.00
- 4" SCH 40 - 1087.00
- 5" SCH 40 - 1235.00
90 Deg Elbow 6" SCH 40 - 1456.00
Alloy 20 Tee 1/2" Schedule 40 Alloy 20 623.00
- 3/4" Schedule 40 - 745.00
- 3/1" Schedule 40 - 987.00
- 2" Schedule 40 - 1179.00
- 3" Schedule 40 - 1402.00
Equal Tee 4" Schedule 40 - 1489.00
Alloy 20 Cap 1/2" Schedule 40 - 652.00
End Cap 3/4" Schedule 40 - 754.00
- 1" Schedule 40 - 800.00
- 1 1/4" Schedule 40 - 937.00
End Cap 2" Schedule 40 Alloy 20 1264.00

We are One Of The Top Alloy 20 Pipe Fittings Manufacturer In India. For final ASTM B366 UNS N08020 Alloy 20 Elbow Price List Please Call on +91-9987870874 or drop an Email to info@fastwell.in.

Alloy 20 Pipe Fittings Dimensions


Alloy 20 Pipe Fittings Dimensions
Normal Pipe Size For (NPS)Outside Daimeter For (O.D.)Buttweld 90 Deg ElbowButtweld 45 Deg ElbowButtweld Return 180 Deg Elbow
(In Inches)Buttweld LR ElbowButtweld SR ElbowButtweld LR ElbowButtweld LR Elbow
(MM/ millimeter)(Inches/ inch.)Center to Face
(In Inch)
Center to Face
(In Inch)
Center to Face
(In Inch)
Radius
(In Inch)
Center to Center
(In Inch)
Back to face
(In Inch)
1/221.30.8401 1/25/821 7/8
3/426.71.0501 1/87/162 1/41 11/16
133.41.3151 1/217/832 3/16
1 1/442.21.6601 7/81 1/413 3/42 3/4
1 1/248.31.9002 1/41 1/21 1/834 1/23 1/4
260.32.375321 3/8464 3/16
2 1/273.02.8753 3/42 1/21 3/457 1/25 3/16
388.93.5004 1/232696 1/4
3 1/2101.64.0005 1/43 1/22 1/4710 1/27 1/4
4114.34.500642 1/28128 1/4
5141.35.5637 1/253 1/8101510 5/16
6168.36.625963 3/4121812 5/16
8219.18.6251285122416 5/16
10273.110.75015106 1/4153020 3/8
12323.912.75018127 1/2183624 3/8

Normal Pipe Size For (NPS)Outside Daimeter For (O.D.)ASME/ANSI B16.9 BW End CapASME/ANSI B16.9 BW Straight TeeASME/ANSI B16.9 BW Straight CrossASME B16.9 BW Stub Ends
(Inches/ inch.)(MM/ millimeter)(Inch.)Length
(Inch.)
Center to End
(Inch.)
Center to End
(Inch.)
Lap Diameter
(Inch.)
Long Length
(Inch.)
Short Length
(Inch.)
1/221.30.840111 3/832
3/426.71.05011 1/81 11/1632
133.41.3151 1/21 1/21 1/2242
1 1/442.21.6601 1/21 7/81 7/82 1/242
1 1/248.31.9001 1/22 1/42 1/42 7/842
260.32.3751 1/22 1/22 1/23 5/862 1/2
2 1/273.02.8751 1/2334 1/862 1/2
388.93.50023 3/83 3/8562 1/2
3 1/2101.64.0002 1/23 3/43 3/45 1/263
4114.34.5002 1/24 1/84 1/86 3/1663
5141.35.56334 7/84 7/87 5/1683
6168.36.6253 1/25 5/85 5/88 1/283 1/2
8219.18.62547710 5/884
10273.110.75058 1/28 1/212 3/4105
12323.912.7506101015106

ASME B16.9 Alloy 20 Tee Dimension


ASME B16.9 Alloy 20 Tee Dimension
NPS Of Equal TeeOutside Daimeter (O.D.)
at bevel
Center-to-End
(C) Run(M) Outlet
1/2"21.32525
3/4"26.72929
1"33.43838
1 1/4"42.24848
1 1/2"48.35757
2"60.36464
2 1/2"73.07676
3"88.98686
3 1/2"101.69595
4"114.3105105
5"141.3124124
6"168.3143143
8"219.1178178
10"273.0216216
12"323.8254254
14"355.6279279
16"406.4305305
18"457.0343343
20"508.0381381
22"559.0419419
24"610.0432432

Test Certificates

  • Raw Materials Certificate
  • EN 10204/3.1B,
  • Third Party Inspection Repor
  • 100% Radiography Test Report

Fastwell Can Supply Express Delivery To Here:


South Africa, Brazil, Saudi Arabia (KSA), Kuwait

Alloy 20 Fittings

Kuwait, Brazil, South Africa, Saudi Arabia (KSA)

Australia, Nigeria, Turkey, UK, Belgium, Egypt

Alloy 20 Pipe Fittings

Australia, Nigeria, Egypt, Turkey, UK, Belgium

Hong Kong, Spain, Oman, Mexico, Poland, Japan

Alloy 20 Stainless Steel Pipe Fittings

Hong Kong, Spain, Oman, Mexico, Poland, Japan

Iran, Italy, Chile, Singapore, Canada, China

Alloy 20 Forged Fittings

Italy, Singapore, Canada, Chile, Iran, China

Malaysia, United Kingdom -UK, Europe, UAE

Alloy 20 Socket Weld Fittings

Malaysia, Europe, United Kingdom -UK, UAE

Philippines, Indonesia, Dammam -KSA,

UNS N08020 Buttweld Fitting

Philippines, Dammam -KSA, Indonesia

Qatar, Europe, Thailand, France

Carpenter 20 Fittings

Thailand, Qatar, France, Europe

Bangladesh, Germany, Finland, USA

Werkstoff Nr. 2.4660 Elbow

Bangladesh, Germany, USA, Finland


How To Make Alloy 20 (N08020) Concentric Reducer From Plate?


How To Make Alloy 20 (N08020) Concentric Reducer From Plate?

Carpenter 20 Elbow Dimensions


Carpenter 20 Elbow Dimensions
Normal Size Of PipeOutside Dai Of (D)90 degree
(Long Radius)
Center-to-End
(A)
45 degree
(Long Radius)
Center-to-End
(B)
90 degree
(3D)
Center-to-End
(A)
45 degree
(3D)
Center-to-End
(B)
1/221.33816
3/426.738195724
133.438227631
42.248259539
48.3572911447
260.3763515263
73954419079
388.91145122995
101.613357267111
4114.315264305127
5141.319079381157
6168.322995457189
8219.1305127610252
10273381159762316
12323.8457190914378
14355.65332221067441
16406.46102541219505
184576862861372568
205087623181524632
225598383431676694
246109143811829757
266609914061981821
2871110674382134883
3076211434702286964
32813121950224381010
34864129553325911073
36914137256527431135
38965144860028961200
401016152463230481264
421067160066032001326
441118167669533531389
461168175372735051453
481219182975936581516

Alloy 20 Tube Fittings Specification Format


Specification Chart Alloy 20 Pipe Fittings
Buy Alloy 20 Fittings Types Reducer/ Pipe Bend/ Stub End/ Tee/ Elbow/ End Cap
Pressure Rating Class 150/ Class 300/ Class 600
Wall Thickness Schedule 10/ Schedule 20/ Schedule 40/ Schedule 80/ Schedule 120/ Schedule 140 To Schedule 180
Length 1/2" To 32"
Chemical Chart Phosphorus(≤0.045), Iron (Balance), Copper (3.0-4.0), Manganese (≤2.00), Silicon (≤1.00), Carbon (≤0.07), Nickel (32.0-38.0) Etc.
UNS Number UNS N08020
Werkstoff Nummer Werkstoff Nr. 2.4660
Dimensions with Tolerances EN/ MSS-SP-43/ ASME/ANSI B16.11/ ASME B16.28/ NPT/ BS/ JIS/ DIN/ ASME/ANSI B16.9/ ISO

Value Added Services

  • Hardness Test
  • Chemical Equipment
  • Flattening Test
  • Mechanical Testing Such as Tensile of Area
  • Pitting Resistance Test
  • Positive Material Identification – PMI Testing
  • Micro and MacroTest
  • Chemical Analysis – Spectro Analysis
  • Intergranular Corrosion (IGC) Test

Alloy 20 Stainless Steel End Cap Dimensions


Alloy 20 Stainless Steel End Cap Dimensions
NPS Of Pipe CapO.D. (Outside Daimeter) Of
D
Length Of
(H)
Length Of
(H1)
1/221.32525
3/426.72525
133.43838
1.1/442.23838
1.1/248.33838
260.33844
2.1/2733851
388.95164
3.1/2101.66476
4114.36476
5141.37689
6168.389102
8219.1102127
10273127152
12323.8152178
14355.6165191
16406.4178203
18457203229
20508229254
22559254254
24610267305
26660267
28711267
30762267
32813267
34864237
36914267
38965305
401016305
421067305
441118343
461168343
481219343

Alloy 20 Concentric Reducer Dimensions


Alloy 20 Concentric Reducer Dimensions
RCD Reiso CodeBIG ØSMALL ØHight (H) MMTheoretical Weight In KG (Kilogram)
(DN)(D) MMThickness Of (S) In MM.(DN)(D) MMThickness Of (S) MM
27 213/426.92.31/221.32.0380.08
33 21133.72.61/221.32.0500.09
33 273/426.92.30.09
42 211"1/442.42.61/221.32.0500.12
42 273/426.92.30.13
42 33133.72.60.14
*48 211"1/248.32.61/221.32.0640.18
48 273/426.92.30.19
48 33133.72.60.20
48 421"1/442.42.60.20
60 27260.32.93/426.92.3760.30
60 33133.72.60.31
60 421"1/442.42.60.32
60 481"1/248.32.60.33
76 332"1/276.12.9133.72.6900.40
76 421"1/442.42.60.47
76 481"1/248.32.60.48
76 60260.32.60.49
89 42388.93.21"1/442.42.6900.55
89 481"1/248.32.60.61
89 60260.32.90.62
89 762"1/276.12.90.63
114 484114.33.61"1/248.32.61000.85
114 60260.32.90.98
114 762"1/276.12.91.00
114 89388.93.21.02
139 605139.74.0260.32.91271.60
139 762"1/276.12.91.70
139 89388.93.21.74
139 1144114.33.61.76
*168 766168.34.52"1/276.12.91402.60
168 89388.93.22.70
168 1144114.33.62.82
168 1395139.74.02.94
219 1148219.16.34114.33.61525.03
219 1395139.74.05.12
219 1686168.34.55.18
*273 11410273.06.34114.33.61787.00
*273 1395139.74.07.20
273 1686168.34.57.40
273 2198219.16.37.55
323 16812323.97.16168.34.520311.00
323 2198219.16.311.10
323 273102736.311.20


Alloy 20 Threaded Fittings Dimensions


Alloy 20 Threaded Fittings Dimensions

Incoloy 20 Stub End Dimensions


Incoloy 20 Stub End Dimensions
Normal Pipe Size For (NPS)O.D. For (Outside Daimeter)
of barrel
Length Of (F)Radius Of(R)Diameter Of (G)
(Min.)(Max.)ASME B16.9 Long
Pattern
ASME B16.9 Short
Pattern
1/2″20.522.87651335
3/4″25.928.17651343
1″32.635.010251351
1 1/4″41.443.610251564
1 1/2″47.549.910251674
2″59.562.415264892
2 1/2″72.275.3152648105
3″88.191.31526410127
3 1/2″100.8104.01527610140
4″113.5116.71527611157
5″140.5144.32037611186
6″167.5171.32038913216
8″218.3222.120310213270
10″272.3277.225412713324
12″323.1328.025415213381
14″354.8359.930515213413
16″405.6411.030515213470
18″456.0462.030515213533
20″507.0514.030515213584
22″558.0565.030515213641
24″609.0616.030515213692

Documentation

  • Fumigation Certificates
  • Guarantee Letter
  • Raw Material Test Reports
  • Fumigation Certificates
  • Heat Treatment Charts
  • Commercial Invoice which includes HS Code
  • QAP (Quality Assurance Plan)
  • NABL approved Laboratory Test Reports

How To Make An Alloy 20 Equal Tee Pattern?


How To Make An Alloy 20 Equal Tee Pattern?

Alloy 20 Compression Fittings Tolerance


Tolerance Of Alloy 20 Pipe Fittings
All Type Of Buttweld Fitting45 deg & 90 deg elbows180 Degree Returns
Normal Size Of Pipe (NPS)Outside Daimeter (O.D.)
at Bevel
I.D. (Inside Daimeter)
at End
Thickness Of Wall (WT)
t / t1
Center to End Daimeter A-B-C-MCenter to Center Daimeter
(O)
Back to Face Daimeter
(K)
Align- ment of Ends
(U)
1/2 a 2 1/210,8Not2771
3 a 3 1/211,6less2771
4+2 -11,6than2771
5 a 6+3 -11,687,50%2771
821,6of nominal2771
10+4 -33,2tickness2772
12 a 18+4 -33,231072
20 a 24+6 -54,831072
26 a 30+7 -54,83----
32 a 48+7 -54,85----

How To Find Take Off Of Alloy 20 45 Degree Elbow?


How To Find Take Off Of Alloy 20 45 Degree Elbow?

ASME B366 Alloy 20 Socket Weld Fittings Dimensions


ASME B366 Alloy 20 Socket Weld Fittings Dimensions
SizeNPSDaimeter Of Socket Weld Bore
(B)
Bore Diameter of Socket Weld
Fitting(2)
D
Socket Wall (Thickness1)
C
Body
Thickness
G
Depth of
Socket Weld Fitting
(Minimum)
(J)
Class Fitting DesignationClass Fitting Designation
DesignationClass 3000#Class 6000#Class 3000#Class 6000#
Class 3000Class 6000Available(Min.)Available(Min.)(Min.)(Min.)
61/811.2
10.8
7.6
6.1
7.6
6.1
3.183.183.963.432.413.159.5
81/414.6
14.2
10.0
8.5
10.0
8.5
3.783.304.604.013.023.68 9.5
103/818
17.6
13.3
11.8
13.3
11.8
4.013.505.034.373.204.01 9.5
151/222.2
21.8
16.6
15.0
16.6
15.0
4.674.095.975.183.734.78 9.5
203/427.6
27.2
21.7
20.2
21.7
20.2
4.904.276.966.043.915.5612.5
25134.3
33.9
27.4
25.9
27.4
25.9
5.694.987.926.934.556.3512.5
321-1/443.1
42.7
35.8
34.3
35.8
34.3
6.075.287.926.934.856.3512.5
401-1/249.2
48.8
41.6
40.1
41.6
40.1
6.355.548.927.805.087.1412.5
50261.7
61.2
53.3
51.7
53.3
51.7
6.936.0410.929.505.548.7416.0
652-1/274.4
73.9
64.2
61.2
64.2
61.2
8.767.677.0116.0
80390.3
89.8
79.4
76.4
79.4
76.4
9.528.307.6216.0
1004115.7
115.2
103.8
100.7
103.8
100.7
10.699.358.5616.0

Searching BS1640 Alloy 20 Socket Weld Fittings manufacturer & exporter In India? Check 1/2 to 48 Inch Werkstoff Nr. 2.4660 Pipe Reducer Dimensions/ Weight Chart, Buy Different Size And Pressure Class


Types Of Alloy 20 Forged Fittings


Alloy 20 Steel Swage Nipple

Alloy 20 Steel Swage Nipple

Alloy 20 Plug

Alloy 20 Plug

Nickel Alloy 20 Bushing

Nickel Alloy 20 Bushing

Werkstoff Nr. 2.4660 Union

Werkstoff Nr. 2.4660 Union

 Incoloy 20 Coupling

Incoloy 20 Coupling

UNS N08020 Pipe Nipples

UNS N08020 Pipe Nipples


View MSS SP-43 ASTM B366 Alloy 20 Tube Fittings Price Per Kilogram In India And EN 10253 Incoloy 20 End Cap Chemical & Mechanical Composition

Alloy 20 End Cap Tensile Strength


Tensile Strength, min.
Mpa 620
ksi 90

UNS N08020 Yield Strength


Yield Strength, min.
Mpa 300
ksi 45

Alloy 20 Pipe Nipple Elongation


Elongation, min. % 40

Alloy 20 Fittings Young's Modulus


Young's Modulus
103ksi Gpa
28 193

Size Chart Of Nickel Alloy 20 Fittings


O.D. (Outside Daimeter) And I.D. (Inside Daimeter)Equivalent ListDiameter Of Nominal PipeThreads Size In Inches
5/160.3131/1627
13/320.4051/827
35/64

0.540

1/418
43/640.6753/818
27/320.8401/214
1-3/641.0503/414
1-5/161.315111-1/2

1-21/32

1.6601-1/411-1/2
1-29/321.9001-1/211-1/2
2-3/82.375211-1/2
2-7/82.8752-1/28
3-1/23.50038
44.0003-1/28
4-1/24.50048

Buy Online ASME B366 Alloy 20 Seamless Fittings Or DIN 2605 Alloy N08020 Forged Fittings In All Sizes And Schedule At Low Price In Mumbai, India.

Application Of Alloy 20 Reducing Tee


  • Alloy 20 Fittings For Heat Exchanger
  • Alloy 20 Pipe Fittings For Pharmaceutical Processing Industry
  • Alloy 20 Stainless Steel Pipe Fittings For Pulp And Paper Industry
  • Alloy 20 Forged Fittings For Fluid Piping
  • Alloy 20 Socket Weld Fitting For Oil And Gas Industry
  • UNS N08020 Buttweld Fitting For Dairy And Food Processing
  • Carpenter 20 Fittings For Power Plants
  • Werkstoff Nr. 2.4660 Elbow For Modern Architecture

Alloy 20 Buttweld Fittings Density


Density g/cm3 8.08

Alloy® 20 Fittings Specific Heat


Specific Heat J/kg.°C 500

Werkstoff Nr. 2.4660 Plug Electrical Resistivity


Electrical Resistivity µΩ·m 1.08

ASTM B366 Alloy 20 Coupling Thermal Conductivity


Thermal Conductivity W/m.°C 12.3

Types Of Alloy 20 Pipe Fittings


Alloy® 20 Reducer

Alloy® 20 Reducer

Alloy 20 N08020 End Cap

Alloy 20 N08020 End Cap

Alloy 20 Buttweld Pipe Bend

Alloy 20 Buttweld Pipe Bend

ASTM B366 N08020 Alloy 20 Elbow

ASTM B366 N08020 Alloy 20 Elbow

Alloy 20 Stainless Steel Tee

Alloy 20 Stainless Steel Tee

Incoloy 20 Stub End

Incoloy 20 Stub End

Alloy 20 Long Radius Elbow

Alloy 20 Long Radius Elbow

UNS N08020 Alloy 20 Equal Tee

UNS N08020 Alloy 20 Equal Tee

Alloy 20 SS Concentric Reducer

Alloy 20 SS Concentric Reducer

DIN 2.4660 Reducing Tee

DIN 2.4660 Reducing Tee

ASME B366 Alloy 20 90 Degree Elbow

ASME B366 Alloy 20 90 Degree Elbow

Alloy N08020 Eccentric Reducer

Alloy N08020 Eccentric Reducer