ASTM A694 F65 Flanges and High Yield A694 F65 SORF/ BLRF/ WNRF Flange

ANSI / ASME B16.5 Carbon Steel SA 694 F65 Slip On And Weld Neck Flanges manufacturer And supplier In India

Flanges made from ASTM standards are bifurcated into various grades. These grades define the temperature, pressure, and various dimensions of a particular product. One such grade of flange belonging to ASTM specification is ASTM A694 F65 Flanges. They have good dimensional accuracy, long service life, and good durability. Due to this their maintenance and repair cost is also low thus making them cost efficient. As per SA 694 F65 F65 Blind Flange manufacturer In India, these flanges have rugged construction and they can easily withstand high heavy load.

Furthermore, these Carbon Steel SA 694 F65 Slip On Flange can withstand pitting, stress corrosion cracking as well as corrosion. These flanges are required to be passed through chemical heat analysis while checking their mechanical properties and chemistry. SA 694 F65 Weld Neck Flanges are said to be made up of an ideal ally due to their ability to withstand high stresses that occur during transmission service. High Yield A694 F65 Socket Weld Flanges tend to display superior metallurgic and mechanical properties including impact resistance and fatigue.

ASME CS Grade A694 F65 Plat Flanges are widely used in power generation, gas processing, pharmaceutical, petrochemical, and offshore oil drilling industry. These Grade A694 F65 RTJ Flanges can also be used in condensers, heat exchangers, seawater equipment, and chemical equipment. They are offered in ring type joints, flat faces, and raised face shapes. We even customize these Carbon Steel A694 F65 Lap Joint Flanges as per the requirement of the application and they can even be coated to enhance the corrosion resistance. We supply these flanges at affordable rates when compared to our competitors.

Table Of Content:

SA 694 F65 Blind Flange Dimensions In MM
Carbon Steel F65 Flange Price List
Types Of ASTM A694 F65 Flanges
ASTM A694 F65 Flanges Ring Gasket Chart
ASME SA694 F65 Flanges Dimensions In MM
Schedule 40 ASTM A694 F65 Carbon Steel Flanges Slip On Dimensions
ASTM A694 F65 Mechanical Properties
Measurement Of SA 694 F65 Plate Flange
A694 F65 Pipe Flanges Tolerance Chart
ASTM A694 F65 Yield Strength
Elongation Of ASME SA694 F65 Flanges
F65 Carbon Steel Forged Flange Size Range

ASTM A694 F65 Material Specification
SA694 F65 RF Flanges Weight Chart
Application Of ASME SA694 F65 RTJ Flange
Torque Chart Of 4 Inch ASTM A694 F65 Reducing Flange
Marking Of CS F65 Forged Flanges
F65 Carbon Steel Flange Bolt & Stud Chart
High Yield F65 Flange Face Types
A694 F65 Chemical Composition
Class 150 Carbon Steel A694 F65 Flanges Tensile Strength
A694 Gr F65 Weld Neck Flange Dimensions
ASTM A694 F65 Temperature
A694 F65 Flanges Packaging Wooden Boxes

Check Regular Updated Class 150 SA 694 F65 F65 Blind Flange Price List With Dimensions & Weight Chart

SA 694 F65 Blind Flange Dimensions In MM

NPS For (Normal Pipe Size)	Outside Daimeter Of (O.D.) (A)	Wall Thickness Of (B)	Daimeter Of Raised Face (C)	(D) (B.C.D.)	# Flanges Bolts Holes	Daimeter Of Bolt Holes	Approx. Weight In KG (Kilogram)
1/2"	3-1/2	7/16	1-3/8	2-3/8	4	5/8	2
3/4"	3-7/8	1/2	1-11/16	2-3/4	4	5/8	2
1"	4-1/4	9/16	2	3-1/8	4	5/8	2
1-1/4"	4-5/8	5/8	2-1/2	3-1/2	4	5/8	3
1-1/2"	5	11/16	2-7/8	3-7/8	4	5/8	3
2"	6	3/4	3-5/8	4-3/4	4	3/4	4
2-1/2"	7	7/8	4-1/8	5-1/2	4	3/4	7
3"	7-1/2	15/16	5	6	4	3/4	9
3-1/2"	8-1/2	15/16	5-1/2	7	8	3/4	13
4"	9	15/16	6-3/16	7-1/2	8	3/4	17
5"	10	15/16	7-5/16	8-1/2	8	7/8	20
6"	11	1	8-1/2	9-1/2	8	7/8	27
8"	13-1/2	1-1/8	10-5/8	11-3/4	8	7/8	47
10"	16	1-3/16	12-3/4	14-1/4	12	1	67
12"	19	1-1/4	15	17	12	1	123
14"	21	1-3/8	16-1/4	18-3/4	12	1-1/8	139
16"	23-1/2	1-7/16	18-1/2	21-1/4	16	1-1/8	187
18"	25	1-9/16	21	22-3/4	16	1-1/4	217
20"	27-1/2	1-11/16	23	25	20	1-1/4	283
24"	32	1-7/8	27-1/4	29-1/2	20	1-3/8	415

Carbon Steel F65 Flange Price List

Type Of Flanges	Size	SCH	Class	Material	Price In INR (India) Per Piece
Blind Flange	3/4"	Sch 40	150	ASTM A694 F65	145.00
-	3/4"	Sch 40	150	-	304.00
-	1"	Sch 40	150	-	498.00
-	1-1/2"	Sch 40	150	-	512.00
-	2"	Sch 40	150	-	654.00
-	3"	Sch 40	150	-	876.00
-	4"	Sch 40	150	-	1155.00
Weld Neck Flange	2"	SCH STD	150	-	435.00
-	3"	SCH STD	150	-	677.00
-	4"	SCH STD	150	-	765.00
-	6"	SCH STD	150	-	897.00
-	8"	SCH STD	150	-	1028.00
-	10"	SCH STD	150	-	1124.00
Socket Weld Flange	3/4"	SCH XS	300	-	324.00
-	1”	SCH XS	300	-	463.00
-	1-1/2"	SCH XS	300	-	657.00
-	2"	SCH XS	300	-	876.00
-	3"	SCH XS	300	-	987.00
-	4"	SCH XS	300	ASTM A694 F65	1234.00
Slip On Flange	1 /1/2"	80	150	-	300.00
-	2"	80	150	-	454.00
-	3"	80	150	-	546.00
-	4"	80	150	-	763.00
-	6"	80	150	ASTM A694 F65	893.00

ISO Approved Manufacturer Of ASTM A694 F65 Flanges In India. For final Carbon Steel F65 Slip On Flanges Price List Please Call on +91-9987870874 or drop an Email to info@fastwell.in.

Types Of ASTM A694 F65 Flanges

ASME SA694 F65 Weld Neck Flanges

ASTM A694 F65 Slip On Flanges

SA694 F65 Threaded Flanges

Carbon Steel F65 RF Flanges

SA 694 F65 Blind Flanges

Grade A694 F65 RTJ Flanges

SA694 F65 Plate Flanges

F65 CS Spectacle Blind Flanges

ASTM A694 F65 Flanges Ring Gasket Chart

NPS For (Normal Pipe Size)	Gasket (I.D.) Inside Daimeter	Gasket (O.D.) Outside Daimeter
NPS For (Normal Pipe Size)	Gasket (I.D.) Inside Daimeter	#150LB	#300LB	#400LB	#600LB	#900LB
1/2"	0.84	1.875	2.125	2.125	2.125	2.50
3/4"	1.06	2.25	2.625	2.625	2.625	2.75
1"	1.31	2.625	2.875	2.875	2.875	3.125
1 1/4"	1.66	3	3.25	3.25	3.25	3.50
1 1/2"	1.91	3.375	3.75	3.75	3.75	3.875
2"	2.38	4.125	4.375	4.375	4.375	5.625
2 1/2"	2.88	4.875	5.125	5.125	5.125	6.50
3"	3.50	5.375	5.875	5.875	5.875	6.625
4"	4.50	6.875	7.125	7.00	7.625	8.125
5"	5.56	7.75	8.50	8.375	9.50	9.75
6"	6.62	8.75	9.875	9.75	10.50	11.375
8"	8.62	11	12.125	12.00	12.625	14.125
10"	10.75	13.375	14.25	14.125	15.75	17.125
12"	12.75	16.125	16.625	16.50	18.00	19.625

ASME SA694 F65 Flanges Dimensions In MM

NPS	(O.D.) For Outside Diameter	Minimum (Wall Thickness) (T)	Diameter Of Raised Face (RF) (R)	Number of Bolts Holes	Dia. of Holes	B.C. For (Bolt Circle)	SORF Bore I.D. (SB)	WNRF Bore I.D. (WB)	Diameter Of Hub Base (H.B.)	Diameter of Hub Top (H.T.)	SORF Length (S.L.)	WNRF Length (W.L.)
¹⁄₂	3.50	0.38	1.38	4	0.62	2.38	0.88	0.62	1.19	0.84	0.56	1.81
³⁄₄	3.88	0.44	1.69	4	0.62	2.75	1.09	0.82	1.50	1.05	0.56	2.00
1	4.25	0.50	2.00	4	0.62	3.12	1.36	1.05	1.94	1.32	0.62	2.12
1¹⁄₄	4.62	0.56	2.50	4	0.62	3.50	1.70	1.38	2.31	1.66	0.75	2.19
1¹⁄₂	5.00	0.62	2.88	4	0.62	3.88	1.95	1.61	2.56	1.90	0.81	2.38
2	6.00	0.69	3.62	4	0.75	4.75	2.44	2.07	3.06	2.38	0.94	2.44
2¹⁄₂	7.00	0.81	4.12	4	0.75	5.50	2.94	2.47	3.56	2.88	1.06	2.69
3	7.50	0.88	5.00	4	0.75	6.00	3.57	3.07	4.25	3.50	1.12	2.69
3¹⁄₂	8.50	0.88	5.50	8	0.75	7.00	4.07	3.55	4.81	4.00	1.19	2.75
4	9.00	0.88	6.19	8	0.75	7.50	4.57	4.03	5.31	4.50	1.25	2.94
5	10.00	0.88	7.31	8	0.88	8.50	5.66	5.05	6.44	5.56	1.38	3.44
6	11.00	0.94	8.50	8	0.88	9.50	6.72	6.07	7.56	6.63	1.50	3.44
8	13.50	1.06	10.62	8	0.88	11.75	8.72	7.98	9.69	8.63	1.69	3.94
10	16.00	1.12	12.75	12	1.00	14.25	10.88	10.02	12.00	10.75	1.88	3.94
12	19.00	1.19	15.00	12	1.00	17.00	12.88	12.00	14.38	12.75	2.12	4.44
14	21.00	1.31	16.25	12	1.12	18.75	14.14	13.25	15.75	14.00	2.19	4.94
16	23.50	1.38	18.50	16	1.12	21.25	16.16	15.25	18.00	16.00	2.44	4.94
18	25.00	1.50	21.00	16	1.25	22.75	18.18	17.25	19.88	18.00	2.62	5.44
20	27.50	1.62	23.00	20	1.25	25.00	20.20	19.25	22.00	20.00	2.81	5.62
22	29.50	1.75	25.25	20	1.38	27.25	22.22	21.25	24.25	22.00	3.07	5.82
24	32.00	1.81	27.25	20	1.38	29.50	24.25	23.25	26.12	24.00	3.19	5.94

Schedule 40 ASTM A694 F65 Carbon Steel Flanges Slip On Dimensions

Normal Pipe Size For (NPS)	(Inside Diameter) For I.D.	O.D. For (Outside Daimeter)	B.C. For (Circle Bolt)	Raised (R)	RF For (Raised Face)	H For (Hight)	Raised Face Wall Thickness	Thickness1	Flat Face (FF) (Thickness2)	Bolts Holes For (B.C.)	Number Of Bolt Hole (B.H.)
1/2	0.88	3.50	2.38	1.38	.063	1.19	.62	.38	.56	.62	4
3/4	1.09	3.88	2.75	1.69	.063	1.50	.62	.44	.56	.62	4
1	1.36	4.25	3.12	2.00	.063	1.94	.69	.50	.63	.62	4
1-1/4	1.70	4.62	3.50	2.50	.063	2.31	.81	.56	.75	.62	4
1-1/2	1.97	5.00	3.88	2.88	.063	2.56	.88	.62	.82	.62	4
2	2.44	6.00	4.75	3.62	.063	3.06	1.00	.69	.94	.75	4
2-1/2	2.94	7.00	5.50	4.12	.063	3.56	1.12	.82	1.06	.75	4
3	3.57	7.50	6.00	5.00	.063	4.25	1.19	.88	1.13	.75	4
3-1/2	4.07	8.50	7.00	5.50	.063	4.81	1.25	.88	1.19	.75	8
4	4.57	9.00	7.50	6.19	.063	5.31	1.31	.88	1.25	.75	8
5	5.66	10.00	8.50	7.31	.063	6.44	1.44	.88	1.38	.88	8
6	6.72	11.00	9.50	8.50	.063	7.56	1.56	.94	1.50	.88	8
8	8.72	13.50	11.75	10.62	.063	9.69	1.75	1.06	1.69	.88	8
10	10.88	16.00	14.25	12.75	.063	12.00	1.94	1.13	1.88	1.00	12
12	12.88	19.00	17.00	15.00	.063	14.38	2.19	1.19	2.13	1.00	12
14	14.14	21.00	18.75	16.25	.063	15.75	2.25	1.32	2.19	1.12	12
16	16.16	23.50	21.25	18.50	.063	18.00	2.50	1.38	2.44	1.12	16
18	18.18	25.00	22.75	21.00	.063	19.88	2.69	1.50	2.63	1.25	16
20	20.20	27.50	25.00	23.00	.063	22.00	2.88	1.63	2.83	1.25	20
22	22.22	29.50	27.25	25.25	.063	24.25	3.13	1.75	3.07	1.38	20
24	24.25	32.00	29.50	27.25	.063	26.12	3.25	1.82	3.19	1.38	20

Get Mechanical Properties Of EN 1092-2 PN16 High Yield A694 F65 Socket Weld Flanges and Pressure Rating

ASTM A694 F65 Mechanical Properties

ASTM A694 Grade	Yield Strength (minimum)		Tensile Strength (minimum)		Elongation (minimum)
ASTM A694 Grade	MPa	ksi	MPa	ksi	%
F65	450	65	530	77	20

Measurement Of SA 694 F65 Plate Flange

T For (Minimum) thread length
Y For Length through hub
O For Outside Diameter of flange
X For Hub Diameter at base
R For Diameter of raised face
C For Thickness of flange
Q For (Minimum) diameter of bolt circle

A694 F65 Pipe Flanges Tolerance Chart

ASTM A694 F65 Flanges	Type Of Daimeter	Tolerance List
(A)	(O.D.) For Outside Diameter	When Outside Diameter is 24 Inch or less: ±1/16" (1.6 mm) When Outside Diameter is over 24": ±1/8" (3.2 mm)
(D)	(I.D.) For Inside Diameter	10 Inch and smaller: ±1/32" (0.8 in mm) 12 Inch thru 18": +1/8" (3.2 in mm) 20 Inch and larger: -1/16" (1.6 in mm)
(B)	Contact Face	1/16" (RF): ±1/32" (0.8 mm) 1/4" (RF), Tongue & Groove (male & female): ±1/64" (0.4 mm)
(J)	Hub At Base Daimeter	When hub base is 24 inch or smaller: ±1/16" (1.6 mm) When hub base is over 24": ±1/8" (3.2 mm)
(H)	Diameter of hub at point of welding	5 inch and smaller: +3/32" (2.4 mm), -1/32" (0.8 mm) 6 inch and larger: +5/32" (4.0 mm), -1/32 (0.8 mm)
(P)	Drilling	Bolt circle (BC): ±1/16" (1.6 mill.) Bolt hole (BH) spacing: ±1/32" (0.8 mill.)
	Eccentricity of bolt circle (bc) with respect to facing	2 1/2" and smaller ±1/32" (0.8 mm) maximum 3" and larger ±1/16" (1.6 mm) maximum
(C)	Wall Thickness	18 inch and smaller: ±1/8" (3.2 mill.), -0" 20 inch and larger: ±3/16" (4.8 mill.), -0"
(K)	hub Length	10 Inch and smaller: ±1/16" (1.6 mm) 12 Inch and larger: ±1/8" (3.2 mm)

ASTM A694 F65 Yield Strength

Yield Strength min.
MPa	450
ksi	65

Elongation Of ASME SA694 F65 Flanges

Elongation (min)
%	20

F65 Carbon Steel Forged Flange Size Range

(NPS) For Nominal Pipe Size In (inches)	As Per ASME B16.5 Class 150
(NPS) For Nominal Pipe Size In (inches)	Flange Diameter In (inch)	Bolts Number	Bolt Diameter In (inch)	Bolt Holes (B.H.) Diameter In (inch)	Bolt Circle (B.C.) In(inch)
1/4	3-3/8	4	1/2	0.62	2-1/4
1/2	3-1/2	4	1/2	0.62	2-3/8
3/4	3-7/8	4	1/2	0.62	2-3/4
1	4-1/4	4	1/2	0.62	3-1/8
1-1/4	4-5/8	4	1/2	0.62	3-1/2
1-1/2	5	4	1/2	0.62	3-7/8
2	6	4	5/8	0.75	4-3/4
2-1/2	7	4	5/8	0.75	5-1/2
3	7-1/2	4	5/8	0.75	6
3-1/2	8-1/2	8	5/8	0.75	7
4	9	8	5/8	0.75	7-1/2
5	10	8	3/4	0.88	8-1/2
6	11	8	3/4	0.88	9-1/2
8	13-1/2	8	3/4	0.88	11-3/4
10	16	12	7/8	1	14-1/4
12	19	12	7/8	1	17
14	21	12	1	1.12	18-3/4
16	23-1/2	16	1	1.12	21-1/4
18	25	16	1-1/8	1.25	22-3/4
20	27-1/2	20	1-1/8	1.25	25
24	32	20	1-1/4	1.38	29-1/2

exporter Of ANSI B16.5 Class 300 ASME CS Grade A694 F65 Plate/ RTJ Flange In Mumbai At Dealer Price Ex Mumbai

ASTM A694 F65 Material Specification

Specification List	ASTM A694 F65 Flanges
Types	Lap Joint/ Threaded/ Socket Weld/ Reducing/ Blind/ Slip On/ Weld Neck
Size	NPS 1⁄₂" To NPS 48” Inch
Face Type	(RF)/ (RTJ)/ (FF)
Pressure Range	150LB/ 300LB/ 400LB/ 600LB/ 900LB/ 1500LB To 2500LB.
Standard	API/ EN 1092-2/ DIN 2561/ DIN 2501/ DIN 2527/ EN 1092-1/ P235GH
Thickness	SCH 180, SCH 80, SCH 40, SCH 160, SCH 120, SCH 5S, SCH 10, XXS etc.

SA694 F65 RF Flanges Weight Chart

Nominal Pipe Size For (NPS)	Slip On Flange (SORF)	Threaded Flange (NPT)	Socket Weld Flange (SWRF)	Lap Joint Flange (Loose)	Blind Flange (BLRF)	Weld Neck Flange (WNRF)
½	1	1	2	1	2	2
¾	2	2	2	2	2	2
1	2	2	2	2	2	3
1¼	3	3	3	3	3	3
1½	3	3	3	3	4	4
2	5	5	5	5	5	6
2½	8	8	8	8	7	10
3	9	9	9	9	9	11.5
3½	11	12	11	11	13	12
4	13	13	13	13	17	16.5
5	15	15	15	15	20	21
6	19	19	19	19	27	26
8	30	30	30	30	47	42
10	43	43	43	43	70	54
12	64	64	64	64	123	88
14	90	90	90	105	140	114
16	106	98	98	140	180	140
18	130	130	130	160	220	165
20	165	165	165	195	285	197
22	185	185	185	245	355	225
24	220	220	220	275	430	268

Application Of ASME SA694 F65 RTJ Flange

ASTM A694 F65 Flanges For Heat Exchanger
SA 694 F65 Slip On Flange For Pulp And Paper Industry
SA 694 F65 Weld Neck Flange For Fluid Piping
SA 694 F65 F65 Blind Flange For Dairy And Food Processing
A694 F65 Socket Weld Flange For Oil And Gas Industry
ASME CS Grade A694 F65 Plat Flangese For Power Plants
Grade A694 F65 RTJ Flange For Modern Architecture

Torque Chart Of 4 Inch ASTM A694 F65 Reducing Flange

Flange Size in (Inches)	Flange Size in (Millimeter)	Radial Projection (Maximum)
Flange Size in (Inches)	Flange Size in (Millimeter)	No Deeper Than the Bottom In MM	Deeper Than the Bottom In MM
1/2	15	3.0	1.5
3/4	20	3.0	1.5
1	25	3.0	1.5
1 1/4	32	3.0	1.5
1 1/2	40	3.0	1.5
2	50	3.0	1.5
2 1/2	65	3.0	1.5
3	80	4.5	1.5
3 1/2	90	6.0	3.0
4	100	6.0	3.0
5	125	6.0	3.0
6	150	6.0	3.0
8	200	8.0	4.5
10	250	8.0	4.5
12	300	8.0	4.5
14	350	8.0	4.5
16	400	10.0	4.5
18	450	12.0	6.0
20	500	12.0	6.0
24	600	12.0	6.0

Marking Of CS F65 Forged Flanges

ASTM A694 F65 Flanges Marking includes ANSI Or ASME/ ASA Code

Name of Manufacturer = (Fastwell Engineering)
NPS = (20" Inch)
Flanges Type = (Slip On)
Schedule = (SCH 180)
Material Designation = (ASTM A182 F347)
Class = (2500#)
Country Name = (Made In India)

F65 Carbon Steel Flange Bolt & Stud Chart

Size in (Inches)	Size in (Millimeter)	Number of Bolts	Bolt (UNC) Size	RF (Raised Face) Stud Length	Stud (ISO) Size	Machine Flange Bolt Length
1/2	15	4	1/2	55	M14	50
3/4	20	4	1/2	65	M14	50
1	25	4	1/2	65	M14	55
1 1/4	32	4	1/2	70	M14	55
1 1/2	40	4	1/2	70	M14	65
2	50	4	5/8	85	M16	70
2 1/2	65	4	5/8	90	M16	75
3	80	4	5/8	90	M16	75
3 1/2	90	8	5/8	90	M16	75
4	100	8	5/8	90	M16	75
5	125	8	3/4	95	M20	85
6	150	8	3/4	100	M20	85
8	200	8	3/4	110	M20	90
10	250	12	7/8	115	M24	100
12	300	12	7/8	120	M24	100
14	350	12	1	135	M27	115
16	400	16	1	135	M27	115
18	450	16	1 1/8	145	M30	125
20	500	20	1 1/8	160	M30	140
24	600	20	1 1/4	170	M33	150

Supply DIN 86029 PN10 Carbon Steel F65 Lap Joint/ Raised Face Flanges According To EN 1092/ AWWA C207/ BS 4504/ DIN Standard.

High Yield F65 Flange Face Types

Types of Flange Faces	DIN And EN 1092-1
(RF) For Raised Fac	Form B2
DIN2512 Tongue Flange	Form C
DIN 2513 Female Flange	Form F
(RF) For Raised Face	Form B1
(RF) For Raised Face	Form B1
Without (RF) Raised Face	Form A
DIN 2512 Groove Flange	Form D
DIN 2513 Male Flange	Form E

A694 F65 Chemical Composition

ASTM A694 F65 Flanges Chemical Composition
Silicon [Si]	0.15-0.35
Carbon [C]	≤0.30
Sulfur [S]	≤0.025
Manganese [Mn]	≤1.60
Phosphorus [P]	≤0.025

Class 150 Carbon Steel A694 F65 Flanges Tensile Strength

Tensile Strength min.
MPa	530
ksi	77

A694 Gr F65 Weld Neck Flange Dimensions

Size (NPS) in Inches	NPS (Normal Pipe Size) Size in Millimeter	Outer Diameter For (O.D.)	Thickness Of Weld Neck Flange	Hub Outer Diameter	Weld Neck Outer Diameter	Length Of ASME B16.5 Welding Neck	Daimeter Of WN Bore	Diameter Of RF (Raised Face)	Raised Face (RF) Height	PCD	Face Of Weld
		A	B	C	D	E	F	G	H	I	J
1/2	15	90	9.6	30	21.3	46	-	34.9	2	60.3	1.6
3/4	20	100	11.2	38	26.7	51		42.9	2	69.9	1.6
1	25	110	12.7	49	33.4	54		50.8	2	79.4	1.6
1 1/4	32	115	14.3	59	42.2	56		63.5	2	88.9	1.6
1 1/2	40	125	15.9	65	48.3	60		73	2	98.4	1.6
2	50	150	17.5	78	60.3	62		92.1	2	120.7	1.6
2 1/2	65	180	20.7	90	73	68		104.8	2	139.7	1.6
3	80	190	22.3	108	88.9	68		127	2	152.4	1.6
3 1/2	90	215	22.3	122	101.6	70		139.7	2	177.8	1.6
4	100	230	22.3	135	114.3	75		157.2	2	190.5	1.6
5	125	255	22.3	164	141.3	87		185.7	2	215.9	1.6
6	150	280	23.9	192	168.3	87		215.9	2	241.3	1.6
8	200	345	27	246	219.1	100		269.9	2	298.5	1.6
10	250	405	28.6	305	273	100		323.8	2	362	1.6
12	300	485	30.2	365	323.8	113		381	2	431.8	1.6
14	350	535	33.4	400	355.6	125		412.8	2	476.3	1.6
16	400	595	35	457	406.4	125		469.9	2	539.8	1.6
18	450	635	38.1	505	457.2	138		533.4	2	577.9	1.6
20	500	700	41.3	559	508	143		584.2	2	635	1.6
24	600	815	46.1	663	610	151		692.2	2	749.3	1.6

We Supplied A Comprehensive Range Of ASTM A694 F65 Flanges To The Following Countries:

Malaysia, United Kingdom -UK, Europe, UAE

ASTM A694 F65 Flanges

United Kingdom -UK, Europe, Malaysia, UAE

SA 694 F65 Slip On Flange

Indonesia, Dammam -KSA, Philippines

ASME SA 694 F65 Weld Neck Flanges

France, Qatar, Thailand, Europe

Carbon Steel F65 F65 Blind Flange

USA, Germany, Bangladesh, Finland

South Africa, Brazil, Saudi Arabia (KSA), Kuwait

A694 F65 Plat Flange

Saudi Arabia (KSA), South Africa, Brazil, Kuwait

Australia, Nigeria, Turkey, UK, Belgium, Egypt

A694 Grade F65 RTJ Flanges

Nigeria, Turkey, UK, Australia, Egypt, Belgium

Hong Kong, Spain, Oman, Mexico, Poland, Japan

High Yield A694 F65 Socket Weld Flanges

Spain, Hong Kong, Poland, Oman, Mexico, Japan

Iran, Italy, Chile, Singapore, Canada, China

Carbon Steel A694 F65 Lap Joint Flanges

Canada, Singapore, Italy, Iran, Chile, China

ASTM A694 F65 Temperature

Temperature In °F	150# According To ASME B16.5	300# According To ASME B16.5	400# According To ASME B16.5	600# According To ASME B16.5	900# According To ASME B16.5	1500# According To ASME B16.5	2500# According To ASME B16.5
-20 to 100	275	720	960	1440	2160	3600	6000
200	230	600	800	1200	1800	3000	5000
300	205	540	720	1080	1620	2700	4500
400	190	495	660	995	1490	2485	4140
500	170	465	620	930	1395	2330	3880
600	140	435	580	875	1310	2185	3640
650	125	430	575	860	1290	2150	3580
700	110	425	565	850	1275	2125	3540
750	95	415	555	830	1245	2075	3460
800	80	405	540	805	1210	2015	3360
850	65	395	530	790	1190	1980	3300
900	50	390	520	780	1165	1945	3240
950	35	380	510	765	1145	1910	3180
1000	20	320	430	640	965	1605	2675
1050	20	310	410	615	925	1545	2570
1100	20	255	345	515	770	1285	2145
1150	20	200	265	400	595	995	1655
1200	20	155	205	310	465	770	1285
1250	20	115	150	225	340	565	945
1300	20	85	115	170	255	430	715
1350	20	60	80	125	185	310	515
1400	20	50	65	95	145	240	400
1450	15	35	45	70	105	170	285
1500	10	25	35	55	80	135	230

A694 F65 Flanges Packaging Wooden Boxes