Largest Independent ASME SA105N Carbon Steel Blind Flange manufacturer In Mumbai, India


ASTM A105N Flange

ASTM is an American standard that is divided into various grades to specify the dimensions and properties inherited by the products. One such type is ASTM A105N Flange. They offer excellent resistance to corrosion in different environments. It is heat treatable and offers excellent tensile and yield strength. ASME SA105N Carbon Steel Blind Flange offers mechanical strength that can be relied upon in critical environments. According to A105N Slip On Flange Manufacturer In India, these flanges can be used in high as well as low temperature services.

CS SA105N Weld Neck Flanges has a chemical composition that provides excellent forming and welding properties. They offer good machinability and less maintenance cost. ASTM A105N Forged Steel Flanges are widely used in chemical plants, food processing, power generation, oil and gas, petrochemical processing, and construction. A105N Galvanized Flange is also used in pulp and paper, and electric plants. These SA105N SWRF Flanges are compatible with services that work in low temperatures. They offer optimum finish, dimensional accuracy, and corrosion resistance. 

A105N Carbon Steel Flanges that are flat faced cannot be bolted with raised face flange. The ring type joint however has a raised gasket face with a different ring groove that is machined in the face. ASME SA 105N Threaded Flanges manufactured by us are as per the international standards. SA105N Lap Joint Flange manufactured by us has superior quality raw material and is passed through various tests. Carbon Steel A105N Plate Flange is supplied by us at affordable rates when compared to our competitors. Our team of experts ensures that they maintain the desired properties.




ASTM A105N Flange Tolerance Chart


ASTM A105N FlangeType Of DaimeterTolerance List
(A) (O.D.) For Outside Diameter
  • When Outside Diameter is 24 Inch or less: ±1/16" (1.6 mm)
  • When Outside Diameter is over 24": ±1/8" (3.2 mm)
(D) (I.D.) For Inside Diameter
  • 10 Inch and smaller: ±1/32" (0.8 in mm)
  • 12 Inch thru 18": +1/8" (3.2 in mm)
  • 20 Inch and larger: -1/16" (1.6 in mm)
(B) Contact Face
  • 1/16" (RF): ±1/32" (0.8 mm)
  • 1/4" (RF), Tongue & Groove (male & female): ±1/64" (0.4 mm)
(J) Hub At Base Daimeter
  • When hub base is 24 inch or smaller: ±1/16" (1.6 mm)
  • When hub base is over 24": ±1/8" (3.2 mm)
(H) Diameter of hub at point of welding
  • 5 inch and smaller: +3/32" (2.4 mm), -1/32" (0.8 mm)
  • 6 inch and larger: +5/32" (4.0 mm), -1/32 (0.8 mm)
(P) Drilling
  • Bolt circle (BC): ±1/16" (1.6 mill.)
  • Bolt hole (BH) spacing: ±1/32" (0.8 mill.)
  Eccentricity of bolt circle (bc) with respect to facing
  • 2 1/2" and smaller ±1/32" (0.8 mm) maximum
  • 3" and larger ±1/16" (1.6 mm) maximum
(C) Wall Thickness
  • 18 inch and smaller: ±1/8" (3.2 mill.), -0"
  • 20 inch and larger: ±3/16" (4.8 mill.), -0"
(K) hub Length
  • 10 Inch and smaller: ±1/16" (1.6 mm)
  • 12 Inch and larger: ±1/8" (3.2 mm)

Don't Spend Extra For Size, supplier And manufacturer Of A105N Slip On Flange And CS SA105N Weld Neck Flanges In Specific Dimensions/ Pressure Rating In India


ASTM A105N Flanges Dimensions


NPS(O.D.) For
Outside Diameter
Minimum (Wall Thickness)
(T)
Diameter Of Raised Face (RF)
(R)
Number of Bolts HolesDia. of HolesB.C. For
(Bolt Circle)
SORF Bore I.D.
(SB)
WNRF Bore I.D.
(WB)
Diameter Of Hub Base
(H.B.)
Diameter of Hub Top
(H.T.)
SORF Length
(S.L.)
WNRF Length
(W.L.)
123.500.381.3840.622.380.880.621.190.840.561.81
343.880.441.6940.622.751.090.821.501.050.562.00
14.250.502.0040.623.121.361.051.941.320.622.12
1144.620.562.5040.623.501.701.382.311.660.752.19
1125.000.622.8840.623.881.951.612.561.900.812.38
26.000.693.6240.754.752.442.073.062.380.942.44
2127.000.814.1240.755.502.942.473.562.881.062.69
37.500.885.0040.756.003.573.074.253.501.122.69
3128.500.885.5080.757.004.073.554.814.001.192.75
49.000.886.1980.757.504.574.035.314.501.252.94
510.000.887.3180.888.505.665.056.445.561.383.44
611.000.948.5080.889.506.726.077.566.631.503.44
813.501.0610.6280.8811.758.727.989.698.631.693.94
1016.001.1212.75121.0014.2510.8810.0212.0010.751.883.94
1219.001.1915.00121.0017.0012.8812.0014.3812.752.124.44
1421.001.3116.25121.1218.7514.1413.2515.7514.002.194.94
1623.501.3818.50161.1221.2516.1615.2518.0016.002.444.94
1825.001.5021.00161.2522.7518.1817.2519.8818.002.625.44
2027.501.6223.00201.2525.0020.2019.2522.0020.002.815.62
2229.501.7525.25201.3827.2522.2221.2524.2522.003.075.82
2432.001.8127.25201.3829.5024.2523.2526.1224.003.195.94

ASTM A105N Pipe Flanges Melting Point


Melting Point (Deg F) 2740

ASME A105N Flange Specific Gravity


Specific Gravity 7.9

3 Inch A105N Flange Pressure Rating


Temperature In °F150# According To ASME B16.5300# According To ASME B16.5400# According To ASME B16.5600# According To ASME B16.5900# According To ASME B16.51500# According To ASME B16.52500# According To ASME B16.5
-20 to 1002757209601440216036006000
2002306008001200180030005000
3002055407201080162027004500
400190495660995149024854140
500170465620930139523303880
600140435580875131021853640
650125430575860129021503580
700110425565850127521253540
75095415555830124520753460
80080405540805121020153360
85065395530790119019803300
90050390520780116519453240
95035380510765114519103180
10002032043064096516052675
10502031041061592515452570
11002025534551577012852145
1150202002654005959951655
1200201552053104657701285
125020115150225340565945
13002085115170255430715
1350206080125185310515
140020506595145240400
145015354570105170285
15001025355580135230

Stockist Of A105N Galvanized Flange In Different Schedule Or Cut To Size At Distributor Price, Check Diffrence Between ASTM A105N Vs A105. View ASTM A105N Standard PDF


ASTM A105N Blind Flange Face Types


Types of Flanges FacesDIN And EN 1092-1
Without (RF) Raised FaceForm A
DIN 2512 Groove FlangeForm D
DIN 2513 Male FlangeForm E
(RF) For Raised FacForm B2
DIN2512 Tongue FlangeForm C
DIN 2513 Female FlangeForm F
(RF) For Raised FaceForm B1
(RF) For Raised FaceForm B1


A105N Flanges Tensile Properties


Tensile Strength minimum
MPa 485
ksi 70

A105N Flange Material Measurement


  • Q For (Minimum) diameter of bolt circle
  • O For Outside Diameter of flange
  • T For (Minimum) thread length
  • C For Thickness of flange
  • X For Hub Diameter at base
  • Y For Length through hub
  • R For Diameter of raised face

Chemical Analysis Of A105N Flanges


ASTM A105N Flanges Chemical Composition
Elements Composition, %
Chromium [Cr] ≤0.30
Vanadium [V] ≤0.08
Copper [Cu] ≤0.40
Nickel [Ni] ≤0.40
Manganese [Mn] 0.60-1.05
Phosphorus [P] ≤0.35
Sulfur [S] ≤0.40
Carbon [C] ≤0.35
Silicon [Si] 0.10-0.35
Molybdenum [Mo] ≤0.12

SA105N SWRF Flange manufacturer And exporter, We Have A Huge Stock Of Class 150 A105N Carbon Steel Flanges ASME B16.5, Check SA105N Lap Joint Flange Specification/ Weight & Wall Thickness Chart

ANSI/ ASME B16.5 ASTM A105N Flange Manufacturer Specifications


Specification Format ASTM A105N Flange
Pressure Test 150#/ 300#/ 400#/ 600#/ 900#/ 1500# To 2500#.
Chemical Equation Silicon [Si] (0.10-0.35), Phosphorus [P] (≤0.35), Sulfur [S] (≤0.40), Carbon [C] (≤0.35), Manganese [Mn] (0.60-1.05) etc.
Accept all small/ Large Order Types: Weld Neck/ Lap Joint/ Threaded/ Socket Weld/ Reducing/ Blind/ Slip On
Modulus of Elasticity Tension 30
Size Chart NPS (Normal Pipe Size) 1⁄₂" To NPS (Normal Pipe Size) 48”
Forging Face Type Raised Face (RF)/ Ring Type Joint (RTJ)/ Flat Face (FF)
Schedule SCH 5S, SCH 10, SCH 40, SCH 180 SCH 80, SCH 120, SCH 160, To XXS.
Dimensions And Standard EN 1092-1/ P235GH/ API/ EN 1092-2/ DIN 2561/ DIN 2501/ DIN 2527
Melting Point 360
Specific Gravity 7.9
Thermal Conductivity 360

Size Chart Of Steel SA 105N Flange


(NPS) For Nominal Pipe Size In
(inches)
As Per ASME B16.5 Class 150
Flange Diameter
In (inch)
Bolts Number
Bolt Diameter
In (inch)
Bolt Holes (B.H.) Diameter In
(inch)
Bolt Circle (B.C.)
In(inch)
1/43-3/841/20.622-1/4
1/23-1/241/20.622-3/8
3/43-7/841/20.622-3/4
14-1/441/20.623-1/8
1-1/44-5/841/20.623-1/2
1-1/2541/20.623-7/8
2645/80.754-3/4
2-1/2745/80.755-1/2
37-1/245/80.756
3-1/28-1/285/80.757
4985/80.757-1/2
51083/40.888-1/2
61183/40.889-1/2
813-1/283/40.8811-3/4
1016127/8114-1/4
1219127/8117
14211211.1218-3/4
1623-1/21611.1221-1/4
1825161-1/81.2522-3/4
2027-1/2201-1/81.2525
2432201-1/41.3829-1/2

ASME B16.5 Flange ASTM A105N Specific Heat


Specific Heat (Btu/lb/Deg F - [32-212 Deg F]) 0.107

Thermal Conductivity Of A105N Pipe Flange


Thermal Conductivity 360

Types Of ASTM A105N Flange


ASTM A105N Carbon Steel Threaded Flanges

ASTM A105N Carbon Steel Threaded Flanges

ASTM A105N Carbon Steel Raised Face Flanges

ASTM A105N Carbon Steel Raised Face Flanges

A105N Carbon Steel RTJ Flanges

A105N Carbon Steel RTJ Flanges

SA105N Carbon Steel Socket Weld Flanges

SA105N Carbon Steel Socket Weld Flanges

Carbon Steel A105N Plate Flanges

Carbon Steel A105N Plate Flanges

 ASME SA105N Lap Joint Flanges

ASME SA105N Lap Joint Flanges

SA 105 Blind Flanges

SA 105N Blind Flanges

ASTM A105N Slip On Flanges

ASTM A105N Slip On Flange

ASME SA105N Weld Neck Flanges

ASME SA105N Weld Neck Flange


No Matter Where The Location, Recently We Have Successfully Supplied ASTM A105N Flange To The Following Countires:


Malaysia, United Kingdom -UK, Europe, UAE

ASME SA105N Carbon Steel Blind Flange

United Kingdom -UK, Europe, Malaysia, UAE

Philippines, Indonesia, Dammam -KSA,

A105N Slip On Flange

Indonesia, Dammam -KSA, Philippines

Qatar, Europe, Thailand, France

CS SA105N Weld Neck Flange

France, Qatar, Thailand, Europe

Bangladesh, Germany, Finland, USA

ASTM A105N Forged Steel Flange

USA, Germany, Bangladesh, Finland

South Africa, Brazil, Saudi Arabia (KSA), Kuwait

SA105N SWRF Flange

South Africa, Brazil, Saudi Arabia (KSA), Kuwait

Australia, Nigeria, Turkey, UK, Belgium, Egypt

A105N Carbon Steel Flange

Egypt, UK, Nigeria, Australia, Turkey, Belgium

Hong Kong, Spain, Oman, Mexico, Poland, Japan

ASME SA 105N Threaded Flange

Hong Kong, Poland, Mexico, Spain, Oman, Japan

Iran, Italy, Chile, Singapore, Canada, China

Carbon Steel A105N Plate Flange

Italy, Singapore, Iran, Canada, Chile, China


Yield Properties Of A105N Threaded Flange


Yield Strength min.
MPa 250
ksi 36

ASME SA 105N Threaded Flanges Available For Online Order, Buy Carbon Steel A105N Plate Flange At Dealer Price In India.

ASTM A105N Flanges Price List In India


Type Of Flanges Size SCH Class Material Price In INR (India) Per Piece
Socket Weld Flange 3/4" SCH XS 300 ASTM A105N 123.00
Socket Weld Flange 1” SCH XS 300 - 177.00
Socket Weld Flange 1-1/2" SCH XS 300 - 289.00
Socket Weld Flange 2" SCH XS 300 - 456.00
Socket Weld Flange 3" SCH XS 300 - 578.00
Socket Weld Flange 4" SCH XS 300 - 757.00
Blind Flange 3/4" Sch 40 150 - 134.00
Blind Flange 3/4" Sch 40 150 - 188.00
Blind Flange 1" Sch 40 150 - 278.00
Blind Flange 1-1/2" Sch 40 150 - 290.00
Blind Flange 2" Sch 40 150 - 456.00
Blind Flange 3" Sch 40 150 - 568.00
Blind Flange 4" Sch 40 150 - 688.00
Weld Neck Flange 2" SCH STD 150 - 300.00
Weld Neck Flange 3" SCH STD 150 - 398.00
Weld Neck Flange 4" SCH STD 150 - 535.00
Weld Neck Flange 6" SCH STD 150 - 746.00
Weld Neck Flange 8" SCH STD 150 - 1078.00
Weld Neck Flange 10" SCH STD 150 - 1499.00
Slip On Flange 1 /1/2" 80 150 - 254.00
Slip On Flange 2" 80 150 - 400.00
Slip On Flange 3" 80 150 - 503.00
Slip On Flange 4" 80 150 - 745.00
Slip On Flange 6" 80 150 ASTM A105N 967.00

Fastwell is trusted A105N Flanges Manufacturer In India. For final ASTM A105N Flange Price List Please Call on +91-9987870874 or drop an Email to info@fastwell.in.

Marking Of Cl.150 A105N Flange


ASTM A105N Flange Marking includes ANSI Or ASME/ ASA Code

  1. Name of Manufacturer = (Fastwell Engineering)
  2. NPS = (4 Inch)
  3. Flanges Type = (Weld Neck)
  4. Schedule = (SCH 80)
  5. Material Designation = (ASTM A105N)
  6. Class = (300#)
  7. Country Name = (Made In India)
Marking Of Cl.150 A105N Flange


Schedule 40 SA105N Flange Bolt Size Chart


Size in (Inches)Size in (Millimeter)Number of BoltsBolt (UNC) SizeRF (Raised Face) Stud Length Stud (ISO) SizeMachine Flange Bolt Length
1/21541/255M1450
3/42041/265M1450
12541/265M1455
1 1/43241/270M1455
1 1/24041/270M1465
25045/885M1670
2 1/26545/890M1675
38045/890M1675
3 1/29085/890M1675
410085/890M1675
512583/495M2085
615083/4100M2085
820083/4110M2090
10250127/8115M24100
12300127/8120M24100
14350121135M27115
16400161135M27115
18450161 1/8145M30125
20500201 1/8160M30140
24600201 1/4170M33150

A105N WNRF Flange Packaging Wooden Boxes


a105n wnrf flange packaging
a105n flange packaging


B16.5 A105N Flange Application


  • ASTM A105N Forged Steel Flange For Dairy And Food Processing
  • A105N Galvanized Flange For Power Plants
  • A105N Carbon Steel Flange For Heat Exchanger
  • ASTM A105N Flange For Oil And Gas Industry
  • A105N Slip On Flange For Pulp And Paper Industry
  • SA105N Weld Neck Flange For Fluid Piping
  • ASME SA105N Carbon Steel Blind Flange For Modern Architecture


Mechanical Structure Of ASME SA105N Flange


Tensile Strength minimum Yield Strength minimum Elongation minimum Reduction of Area, minimum Hardness
MPa ksi MPa ksi % % HBW
485 70 250 36 22 30 137-187

Dimension Table Of A105N Slip On Flange


Dimension Table Of A105N Slip On Flange
Normal Pipe Size For (NPS)(Inside Diameter) For I.D.O.D. For (Outside Daimeter)B.C. For (Circle Bolt)Raised
(R)
RF For (Raised Face)H For (Hight)Raised Face Wall ThicknessThickness1Flat Face (FF)
(Thickness2)
Bolts Holes For
(B.C.)
Number Of Bolt Hole
(B.H.)
1/20.883.502.381.38.0631.19.62.38.56.624
3/41.093.882.751.69.0631.50.62.44.56.624
11.364.253.122.00.0631.94.69.50.63.624
1-1/41.704.623.502.50.0632.31.81.56.75.624
1-1/21.975.003.882.88.0632.56.88.62.82.624
22.446.004.753.62.0633.061.00.69.94.754
2-1/22.947.005.504.12.0633.561.12.821.06.754
33.577.506.005.00.0634.251.19.881.13.754
3-1/24.078.507.005.50.0634.811.25.881.19.758
44.579.007.506.19.0635.311.31.881.25.758
55.6610.008.507.31.0636.441.44.881.38.888
66.7211.009.508.50.0637.561.56.941.50.888
88.7213.5011.7510.62.0639.691.751.061.69.888
1010.8816.0014.2512.75.06312.001.941.131.881.0012
1212.8819.0017.0015.00.06314.382.191.192.131.0012
1414.1421.0018.7516.25.06315.752.251.322.191.1212
1616.1623.5021.2518.50.06318.002.501.382.441.1216
1818.1825.0022.7521.00.06319.882.691.502.631.2516
2020.2027.5025.0023.00.06322.002.881.632.831.2520
2222.2229.5027.2525.25.06324.253.131.753.071.3820
2424.2532.0029.5027.25.06326.123.251.823.191.3820

ASTM A105N Flange Schedule Chart


Nominal Pipe Size For (NPS)Slip On Flanges (SORF)Threaded Flanges (NPT)Socket Weld Flanges (SWRF)Lap Joint Flanges (Loose)Blind Flanges (BLRF)Weld Neck Flanges (WNRF)
½112122
¾222222
1222223
333333
333344
2555556
8888710
39999911.5
111211111312
4131313131716.5
5151515152021
6191919192726
8303030304742
10434343437054
126464646412388
14909090105140114
161069898140180140
18130130130160220165
20165165165195285197
22185185185245355225
24220220220275430268

ASTM A105N Forged Steel Flanges Gasket


NPS For (Normal Pipe Size)Gasket (I.D.) Inside Daimeter
Gasket (O.D.) Outside Daimeter
#150LB #300LB #400LB #600LB #900LB
1/2"0.841.8752.1252.1252.1252.50
3/4"1.062.252.6252.6252.6252.75
1"1.312.6252.8752.8752.8753.125
1 1/4"1.6633.253.253.253.50
1 1/2"1.913.3753.753.753.753.875
2"2.384.1254.3754.3754.3755.625
2 1/2"2.884.8755.1255.1255.1256.50
3"3.505.3755.8755.8755.8756.625
4"4.506.8757.1257.007.6258.125
5"5.567.758.508.3759.509.75
6"6.628.759.8759.7510.5011.375
8"8.621112.12512.0012.62514.125
10"10.7513.37514.2514.12515.7517.125
12"12.7516.12516.62516.5018.0019.625

Dimensions Formula Of ANSI B16.5 Class 150 ASTM A105N Weld Neck Flanges


Dimensions Formula Of ANSI B16.5 Class 150 ASTM A105N Weld Neck Flanges
Size (NPS) in Inches NPS (Normal Pipe Size) Size in MillimeterOuter Diameter For (O.D.) Thickness Of Weld Neck FlangeHub Outer DiameterWeld Neck Outer DiameterLength Of ASME B16.5 Welding NeckDaimeter Of WN BoreDiameter Of RF (Raised Face) Raised Face (RF) HeightPCDFace Of Weld
ABCDEFGHIJ
1/215909.63021.346-34.9260.31.6
3/42010011.23826.75142.9269.91.6
12511012.74933.45450.8279.41.6
1 1/43211514.35942.25663.5288.91.6
1 1/24012515.96548.36073298.41.6
25015017.57860.36292.12120.71.6
2 1/26518020.7907368104.82139.71.6
38019022.310888.9681272152.41.6
3 1/29021522.3122101.670139.72177.81.6
410023022.3135114.375157.22190.51.6
512525522.3164141.387185.72215.91.6
615028023.9192168.387215.92241.31.6
820034527246219.1100269.92298.51.6
1025040528.6305273100323.823621.6
1230048530.2365323.81133812431.81.6
1435053533.4400355.6125412.82476.31.6
1640059535457406.4125469.92539.81.6
1845063538.1505457.2138533.42577.91.6
2050070041.3559508143584.226351.6
2460081546.1663610151692.22749.31.6

4 Inch A105N Carbon Steel Flanges Density


Density (lb / cu. in.) 0.284

SCH 80 A105N Steel Flanges Torque Specs


Flanges Size in (Inches)Flanges Size in (Millimeter)Radial Projection (Maximum)
No Deeper Than the Bottom In MMDeeper Than the Bottom In MM
1/2153.01.5
3/4203.01.5
1253.01.5
1 1/4323.01.5
1 1/2403.01.5
2503.01.5
2 1/2653.01.5
3804.51.5
3 1/2906.03.0
41006.03.0
51256.03.0
61506.03.0
82008.04.5
102508.04.5
123008.04.5
143508.04.5
1640010.04.5
1845012.06.0
2050012.06.0
2460012.06.0

A105N Blind Flanges Dimensions


A105N Blind Flanges Dimensions
NPS For (Normal Pipe Size)Outside Daimeter Of (O.D.)
(A)
Wall Thickness Of (B)
Daimeter Of Raised Face
(C)
(D)
(B.C.D.)
# Flanges Bolts
Holes
Daimeter Of Bolt Holes
Approx.
Weight In KG (Kilogram)
1/2"3-1/27/161-3/82-3/845/82
3/4"3-7/81/21-11/162-3/445/82
1"4-1/49/1623-1/845/82
1-1/4"4-5/85/82-1/23-1/245/83
1-1/2"511/162-7/83-7/845/83
2"63/43-5/84-3/443/44
2-1/2"77/84-1/85-1/243/47
3"7-1/215/165643/49
3-1/2"8-1/215/165-1/2783/413
4"915/166-3/167-1/283/417
5"1015/167-5/168-1/287/820
6"1118-1/29-1/287/827
8"13-1/21-1/810-5/811-3/487/847
10"161-3/1612-3/414-1/412167
12"191-1/41517121123
14"211-3/816-1/418-3/4121-1/8139
16"23-1/21-7/1618-1/221-1/4161-1/8187
18"251-9/162122-3/4161-1/4217
20"27-1/21-11/162325201-1/4283
24"321-7/827-1/429-1/2201-3/8415