ASME B16.5 Class 150 IBR Flanges manufacturer In India And supplier In Mumbai, India


IBR Approved Flanges

Flanges made up of various standards and grades are available with us the ones manufactured as per Indian Boiling standards are known as IBR Approved Flanges. These flanges can be used in high temperature and high pressure environments. IBR Flanges manufacturer In India produces these flanges in various shapes such as socket weld, neck weld, and so on. AWWA C207 IBR Approved Blind Flanges can be made up of various materials such as stainless steel, carbon steel, alloy steel, and mild steel. Moreover, these EN 1092-1 IBR Pipe Flanges can be used under high wear and tear conditions. 

BS 4504 IBR Carbon Steel Slip On Flanges can easily be slid over the pipes and if required they can be welded as well. The ones that are forged are formed by the use of mechanical and thermal energy.  Schedule 40 IBR Plate Flange is commonly used in reducing connections. These flanges come in a pressure rating of 2000-6000. They can also be coated if required by the customer. Class 300 IBR Approved Lap Joint Flanges are available in the flat face or the raised face and are available in ½ inch to 24 inches. They are mostly available in 4, 8, 12, 16, 20, 24, bolts.

DIN 86029 PN10 IBR Stainless Steel Flanges offer flawless performance and long service life. Most of the time the lap joint flanges are used in tandem with the stud end this is because they are not produced with a raised face. EN 1092-2 PN16 IBR Approved Socket Weld Flanges and the stub ends that are used are held together due to the pressure of the bolt. They also have a good load bearing capacity. MSS SP-44 IBR Weld Neck Flange has the freedom to swivel around the pipe, which assists in alignment with the bolts. carbon steel can be used due to lack of contact between the flange and the fluid in the pipe. Furthermore, it can be salvaged for reuse.




India's Largest manufacturer Of AWWA C207 IBR Approved Blind Flanges According ANSI B16.5 Standards, Check EN 1092-1 IBR Pipe Flange Dimensional Format/ Schedule Chart/ Pressure Rating/ Wall Thickness


EN 1092-1 IBR Flange Dimensions


NPS(O.D.) For
Outside Diameter
Minimum (Wall Thickness)
(T)
Diameter Of Raised Face (RF)
(R)
Number of Bolts HolesDia. of HolesB.C. For
(Bolt Circle)
SORF Bore I.D.
(SB)
WNRF Bore I.D.
(WB)
Diameter Of Hub Base
(H.B.)
Diameter of Hub Top
(H.T.)
SORF Length
(S.L.)
WNRF Length
(W.L.)
123.500.381.3840.622.380.880.621.190.840.561.81
343.880.441.6940.622.751.090.821.501.050.562.00
14.250.502.0040.623.121.361.051.941.320.622.12
1144.620.562.5040.623.501.701.382.311.660.752.19
1125.000.622.8840.623.881.951.612.561.900.812.38
26.000.693.6240.754.752.442.073.062.380.942.44
2127.000.814.1240.755.502.942.473.562.881.062.69
37.500.885.0040.756.003.573.074.253.501.122.69
3128.500.885.5080.757.004.073.554.814.001.192.75
49.000.886.1980.757.504.574.035.314.501.252.94
510.000.887.3180.888.505.665.056.445.561.383.44
611.000.948.5080.889.506.726.077.566.631.503.44
813.501.0610.6280.8811.758.727.989.698.631.693.94
1016.001.1212.75121.0014.2510.8810.0212.0010.751.883.94
1219.001.1915.00121.0017.0012.8812.0014.3812.752.124.44
1421.001.3116.25121.1218.7514.1413.2515.7514.002.194.94
1623.501.3818.50161.1221.2516.1615.2518.0016.002.444.94
1825.001.5021.00161.2522.7518.1817.2519.8818.002.625.44
2027.501.6223.00201.2525.0020.2019.2522.0020.002.815.62
2229.501.7525.25201.3827.2522.2221.2524.2522.003.075.82
2432.001.8127.25201.3829.5024.2523.2526.1224.003.195.94

IBR Flanges Specification


Specification Format IBR Approved Flanges
We Manufacturer Most Selling Types Weld Neck Flange/ Lap Joint Flange/ Threaded Flange/ Socket Weld Flange/ Blind Flange/ Slip On Flange/ Reducing Flange
Pressure List Class 150, Class 300, Class 400, Class 600, Class 900, Class 1500 To Class 2500.
Dimensions DIN 2501 Flange/ DIN 2527 Flange/ JIS Flange/ ISO Flange/ DIN 2561 Flange/ EN 1092-1 Flange/ P235GH Flange/ API Flange/ EN 1092-2 Flange
Forging Methods Rolling And Cutting/ Forging & Casting
Manufacturer Size NPS 1⁄₂" To NPS 12”
Thickness SCH 5S/ SCH 10/ SCH 40/ SCH 80/ SCH 120/ SCH 160/ SCH 180 To XXS.
Face Type Raised Face/ Flat Face/ Ring Type Joint

IBR Flange HSN Code


HSN Code Description Of Product
84818030 Industrial valves And Pressure-Reducing Valves

AWWA C207 IBR Flange Size Chart


(NPS) For Nominal Pipe Size In
(inches)
As Per ASME B16.5 Class 150
Flange Diameter
In (inch)
Bolts Number
Bolt Diameter
In (inch)
Bolt Holes (B.H.) Diameter In
(inch)
Bolt Circle (B.C.)
In(inch)
1/43-3/841/20.622-1/4
1/23-1/241/20.622-3/8
3/43-7/841/20.622-3/4
14-1/441/20.623-1/8
1-1/44-5/841/20.623-1/2
1-1/2541/20.623-7/8
2645/80.754-3/4
2-1/2745/80.755-1/2
37-1/245/80.756
3-1/28-1/285/80.757
4985/80.757-1/2
51083/40.888-1/2
61183/40.889-1/2
813-1/283/40.8811-3/4
1016127/8114-1/4
1219127/8117
14211211.1218-3/4
1623-1/21611.1221-1/4
1825161-1/81.2522-3/4
2027-1/2201-1/81.2525
2432201-1/41.3829-1/2

Take The Reference Of Our Quality And Timely Delivery From Our Clients In Following Cities:


Malaysia, United Kingdom -UK, Europe, UAE

IBR Approved Flanges

Europe, Malaysia, United Kingdom -UK, UAE

Philippines, Indonesia, Dammam -KSA,

IBR Flanges

Philippines, Indonesia, Dammam -KSA

Qatar, Europe, Thailand, France

IBR Approved Blind Flanges

France, Qatar, Thailand, Europe

Bangladesh, Germany, Finland, USA

IBR Pipe Flange

USA, Germany, Bangladesh, Finland

South Africa, Brazil, Saudi Arabia (KSA), Kuwait

IBR Carbon Steel Slip On Flange

Saudi Arabia (KSA), Brazil, South Africa, Kuwait

Australia, Nigeria, Turkey, UK, Belgium, Egypt

IBR Weld Neck Flange

UK, Turkey, Nigeria, Egypt, Australia, Belgium

Hong Kong, Spain, Oman, Mexico, Poland, Japan

PN16 IBR Approved Socket Weld Flange

Spain, Poland, Mexico, Hong Kong, Oman, Japan

Iran, Italy, Chile, Singapore, Canada, China

IBR Stainless Steel Flange

Singapore, Iran, Canada, Italy, Chile, China


IBR Approved Flanges Pressure Rating


Temperature In °F150# According To ASME B16.5300# According To ASME B16.5400# According To ASME B16.5600# According To ASME B16.5900# According To ASME B16.51500# According To ASME B16.52500# According To ASME B16.5
-20 to 1002757209601440216036006000
2002306008001200180030005000
3002055407201080162027004500
400190495660995149024854140
500170465620930139523303880
600140435580875131021853640
650125430575860129021503580
700110425565850127521253540
75095415555830124520753460
80080405540805121020153360
85065395530790119019803300
90050390520780116519453240
95035380510765114519103180
10002032043064096516052675
10502031041061592515452570
11002025534551577012852145
1150202002654005959951655
1200201552053104657701285
125020115150225340565945
13002085115170255430715
1350206080125185310515
140020506595145240400
145015354570105170285
15001025355580135230

PN16 IBR Approved Pipe Flanges Weight Chart


Nominal Pipe Size For (NPS)Slip On Flange (SORF)Threaded Flange (NPT)Socket Weld Flange (SWRF)Lap Joint Flange (Loose)Blind Flange (BLRF)Weld Neck Flange (WNRF)
½112122
¾222222
1222223
333333
333344
2555556
8888710
39999911.5
111211111312
4131313131716.5
5151515152021
6191919192726
8303030304742
10434343437054
126464646412388
14909090105140114
161069898140180140
18130130130160220165
20165165165195285197
22185185185245355225
24220220220275430268

Select Your Size And Schedule In Our Online Inventory Of BS 4504 IBR Carbon Steel Slip On Flanges, Buy MSS SP-44 IBR Weld Neck Flange In Mumbai At Factory Price


IBR Approved Forged Flanges Price List


Type Of FlangesSize SCHClassMaterialPrice In INR (India) Per Piece
IBR Approved Blind Flange3/4"Sch 40150IBR Approved234.00
-3/4"Sch 40150-346.00
-1"Sch 40150-453.00
-1-1/2"Sch 40150-653.00
-2"Sch 40150-873.00
-3"Sch 40150-984.00
-4"Sch 40150-1263.00
-6"Sch 40150-1453.00
Blind Flange8"Sch 40150IBR Approved1674.00
IBR Approved Socket Weld Flange3/4"SCH XS300IBR Approved323.00
-1”SCH XS300-454.00
-1-1/2"SCH XS300-554.00
-2"SCH XS300-654.00
-3"SCH XS300-794.00
-4"SCH XS300-983.00
Socket Weld Flange6"SCH XS300-1243.00
IBR Approved Slip On Flange1 /1/2"80150IBR Approved342.00
-2"80150-532.00
-3"80150-762.00
-4"80150-872.00
-6"80150-1242.00
Slip On Flange8"80150-1566.00
IBR Approved Weld Neck Flange2"SCH STD150IBR Approved453.00
-3"SCH STD150-542.00
-4"SCH STD150-763.00
-6"SCH STD150-872.00
-8"SCH STD150-1342.00
-10"SCH STD150-1674.00
Weld Neck Flange12"SCH STD150IBR Approved1982.00

India's Renowned Manufacturer Of IBR Approved Flanges. For final IBR Approved Pipe Flanges Price List Please Call on +91-9987870874 or drop an Email to info@fastwell.in.

We Are Famed As The Most Trusted manufacturer Of EN 1092-2 PN16 IBR Approved Socket Weld Flanges, Refer DIN 86029 PN10 IBR Stainless Steel Flanges Bolt Chart

IBR Flange Table H Bolt Chart


Size in (Inches)Size in (Millimeter)Number of BoltsBolt (UNC) SizeRF (Raised Face) Stud Length Stud (ISO) SizeMachine Flange Bolt Length
1/21541/255M1450
3/42041/265M1450
12541/265M1455
1 1/43241/270M1455
1 1/24041/270M1465
25045/885M1670
2 1/26545/890M1675
38045/890M1675
3 1/29085/890M1675
410085/890M1675
512583/495M2085
615083/4100M2085
820083/4110M2090
10250127/8115M24100
12300127/8120M24100
14350121135M27115
16400161135M27115
18450161 1/8145M30125
20500201 1/8160M30140
24600201 1/4170M33150

EN 1092-2 IBR RTJ Flange Gasket Chart


NPS For (Normal Pipe Size)Gasket (I.D.) Inside Daimeter
Gasket (O.D.) Outside Daimeter
#150LB #300LB #400LB #600LB #900LB
1/2"0.841.8752.1252.1252.1252.50
3/4"1.062.252.6252.6252.6252.75
1"1.312.6252.8752.8752.8753.125
1 1/4"1.6633.253.253.253.50
1 1/2"1.913.3753.753.753.753.875
2"2.384.1254.3754.3754.3755.625
2 1/2"2.884.8755.1255.1255.1256.50
3"3.505.3755.8755.8755.8756.625
4"4.506.8757.1257.007.6258.125
5"5.567.758.508.3759.509.75
6"6.628.759.8759.7510.5011.375
8"8.621112.12512.0012.62514.125
10"10.7513.37514.2514.12515.7517.125
12"12.7516.12516.62516.5018.0019.625

IBR Approved Socket Weld Flange Dimensions


IBR Approved Socket Weld Flange Dimensions
NPSID (Inside Daimeter)OD (Outside Daimeter)B.C. (Bolt Circle)Raised Face For (R)RF (Raised Face)HDInside Daimeter 2*Thickness Of Raised Face (T)Thickness (1)Flat Face (Thickness2)Bolt Hole (B.H.)Number of Bolt Holes
1/2"0.88"3.50"2.38"1.38".063"1.19".38"0.62".62".38".56".62"4
3/4"1.09"3.88"2.75"1.69".063"1.50".44"0.82".62".44".56".62"4
1"1.36"4.25"3.12"2.00".063"1.94".50"1.05".69".50".63".62"4
1-1/4"1.70"4.62"3.50"2.50".063"2.31".56"1.38".81".56".75".62"4
1-1/2"1.97"5.00"3.88"2.88".063"2.56".62"1.61".88".62".82".62"4
2"2.44"6.00"4.75"3.62".063"3.06".69"2.07"1.00".69".94".75"4
2-1/2"2.94"7.00"5.50"4.12".063"3.56".75"2.47"1.12".82"1.06".75"4
3"3.57"7.50"6.00"5.00".063"4.25".81"3.07"1.19".88"1.13".75"4
3-1/2"4.07"8.50"7.00"5.50".063"4.81".88"3.55"1.25".88"1.19".75"8
4"4.57"9.00"7.50"6.19".063"5.31".94"4.03"1.31".88"1.25".75"8
5"5.66"10.00"8.50"7.31".063"6.44".94"5.05"1.44".88"1.38".88"8
6"6.72"11.00"9.50"8.50".063"7.56"1.06"6.07"1.56".94"1.50".88"8
8"8.72"13.50"11.75"10.62".063"9.69"1.25"7.98"1.75"1.06"1.69".88"8
10"10.88"16.00"14.25"12.75".063"12.00"1.31"10.02"1.94"1.13"1.88"1.00"12
12"12.88"19.00"17.00"15.00".063"14.38"1.56"12.00"2.19"1.19"2.13"1.00"12
14"14.14"21.00"18.75"16.25".063"15.75"1.63"13.25"2.25"1.32"2.19"1.12"12
16"16.16"23.50"21.25"18.50".063"18.00"1.75"15.25"2.50"1.38"2.44"1.12"16
18"18.18"25.00"22.75"21.00".063"19.88"1.94"17.25"2.69"1.50"2.63"1.25"16
20"20.20"27.50"25.00"23.00".063"22.00"2.13"19.25"2.88"1.63"2.83"1.25"20
22"22.22"29.50"27.25"25.25".063"24.25"2.38"21.25"3.13"1.75"3.07"1.38"20
24"24.25"32.00"29.50"27.25".063"26.12"2.50"23.25"3.25"1.82"3.19"1.38"20

Schedule 40 IBR Pipe Flange Thickness Chart


NPS For Normal Pipe SizeO.D. For (Outside Daimeter)10 SCH20 SCH30 SCHSTD Wall40 SCH60 SCHEXT Hvy80 SCH100 SCH120 SCH140 SCH160 SCHXX Hvy
½0.840.083......0.1090.109...0.1470.147.........0.1880.294
¾1.050.083......0.1130.113...0.1540.154.........0.2190.308
11.3150.109......0.1330.133...0.1790.179.........0.250.358
1 ¼1.660.109......0.140.14...0.1910.191.........0.250.382
1 ½1.90.109......0.1450.145...0.20.2.........0.2810.4
22.3750.109......0.1540.154...0.2180.218.........0.3440.436
2 ½2.8750.12......0.2030.203...0.2760.276.........0.3750.552
33.50.12--0.2160.216-0.30.3---0.4380.6
3 ½40.12--0.2260.226-0.3180.318----0.636
44.50.12--0.2370.237-0.3370.337-0.438-0.5310.674
55.5630.134--0.2580.258-0.3750.375-0.5-0.6250.75
66.6250.134--0.280.28-0.4320.432-0.562-0.7190.864
88.6250.1480.250.2770.3220.3220.4060.50.50.5940.7190.8120.9060.875
1010.750.1650.250.3070.3650.3650.50.50.5940.7190.84411.1251
1212.750.180.250.330.3750.4060.5620.50.6880.84411.1251.3121
14140.250.3120.3750.3750.4380.5940.50.750.9381.0941.251.406-
16160.250.3120.3750.3750.50.6560.50.8441.0311.2191.4381.594-
18180.250.3120.4380.3750.5620.750.50.9381.1561.3751.5621.781-
20200.250.3750.50.3750.5940.8120.51.0311.2811.51.751.969-
22220.25--0.375--0.5------
24240.250.3750.5620.3750.6880.9690.51.2191.5311.8122.0622.344-
2626---0.375--0.5------
30300.3120.50.6250.375--0.5------
36360.3120.50.6250.3750.75-0.5------
4040---0.375--0.5------
4242……..……..……..0.375……..……..0.5……..……..……..……..……..……..
4848……..……..……..0.375……..……..0.5……..……..……..……..……..……..

Best Price Guarantee With ISO Test Report Of Schedule 40 IBR Plate Flange, Class 300 IBR Approved Lap Joint Flanges exporter & supplier In Mumbai, India.

IBR Pipe Reducing Flange Tolerance Chart


IBR Approved FlangesType Of DaimeterTolerance List
(A)(O.D.) For Outside Diameter
  • When Outside Diameter is 24 Inch or less: ±1/16" (1.6 mm)
  • When Outside Diameter is over 24": ±1/8" (3.2 mm)
(D)(I.D.) For Inside Diameter
  • 10 Inch and smaller: ±1/32" (0.8 in mm)
  • 12 Inch thru 18": +1/8" (3.2 in mm)
  • 20 Inch and larger: -1/16" (1.6 in mm)
(B) Contact Face
  • 1/16" (RF): ±1/32" (0.8 mm)
  • 1/4" (RF), Tongue & Groove (male & female): ±1/64" (0.4 mm)
(J)Hub At Base Daimeter
  • When hub base is 24 inch or smaller: ±1/16" (1.6 mm)
  • When hub base is over 24": ±1/8" (3.2 mm)
(H)Diameter of hub at point of welding
  • 5 inch and smaller: +3/32" (2.4 mm), -1/32" (0.8 mm)
  • 6 inch and larger: +5/32" (4.0 mm), -1/32 (0.8 mm)
(P)Drilling
  • Bolt circle (BC): ±1/16" (1.6 mill.)
  • Bolt hole (BH) spacing: ±1/32" (0.8 mill.)
 Eccentricity of bolt circle (bc) with respect to facing
  • 2 1/2" and smaller ±1/32" (0.8 mm) maximum
  • 3" and larger ±1/16" (1.6 mm) maximum
(C)Wall Thickness
  • 18 inch and smaller: ±1/8" (3.2 mill.), -0"
  • 20 inch and larger: ±3/16" (4.8 mill.), -0"
(K)hub Length
  • 10 Inch and smaller: ±1/16" (1.6 mm)
  • 12 Inch and larger: ±1/8" (3.2 mm)

IBR Approved Stainless Steel Flanges Torque Values


Flanges Size in (Inches)Flanges Size in (Millimeter)Radial Projection (Maximum)
No Deeper Than the Bottom In MMDeeper Than the Bottom In MM
1/2153.01.5
3/4203.01.5
1253.01.5
1 1/4323.01.5
1 1/2403.01.5
2503.01.5
2 1/2653.01.5
3804.51.5
3 1/2906.03.0
41006.03.0
51256.03.0
61506.03.0
82008.04.5
102508.04.5
123008.04.5
143508.04.5
1640010.04.5
1845012.06.0
2050012.06.0
2460012.06.0

Class 150 IBR Approved Slip On Flanges Dimensions


Class 150 IBR Approved Slip On Flanges Dimensions
Normal Pipe Size For (NPS)(Inside Diameter) For I.D.O.D. For (Outside Daimeter)B.C. For (Circle Bolt)Raised
(R)
RF For (Raised Face)H For (Hight)Raised Face Wall ThicknessThickness1Flat Face (FF)
(Thickness2)
Bolts Holes For
(B.C.)
Number Of Bolt Hole
(B.H.)
1/20.883.502.381.38.0631.19.62.38.56.624
3/41.093.882.751.69.0631.50.62.44.56.624
11.364.253.122.00.0631.94.69.50.63.624
1-1/41.704.623.502.50.0632.31.81.56.75.624
1-1/21.975.003.882.88.0632.56.88.62.82.624
22.446.004.753.62.0633.061.00.69.94.754
2-1/22.947.005.504.12.0633.561.12.821.06.754
33.577.506.005.00.0634.251.19.881.13.754
3-1/24.078.507.005.50.0634.811.25.881.19.758
44.579.007.506.19.0635.311.31.881.25.758
55.6610.008.507.31.0636.441.44.881.38.888
66.7211.009.508.50.0637.561.56.941.50.888
88.7213.5011.7510.62.0639.691.751.061.69.888
1010.8816.0014.2512.75.06312.001.941.131.881.0012
1212.8819.0017.0015.00.06314.382.191.192.131.0012
1414.1421.0018.7516.25.06315.752.251.322.191.1212
1616.1623.5021.2518.50.06318.002.501.382.441.1216
1818.1825.0022.7521.00.06319.882.691.502.631.2516
2020.2027.5025.0023.00.06322.002.881.632.831.2520
2222.2229.5027.2525.25.06324.253.131.753.071.3820
2424.2532.0029.5027.25.06326.123.251.823.191.3820

ASME B16.5 IBR Approved Weld Neck Flange Dimensions


ASME B16.5 IBR Approved Weld Neck Flange Dimensions
Size (NPS) in Inches NPS (Normal Pipe Size) Size in MillimeterOuter Diameter For (O.D.) Thickness Of Weld Neck FlangeHub Outer DiameterWeld Neck Outer DiameterLength Of ASME B16.5 Welding NeckDaimeter Of WN BoreDiameter Of RF (Raised Face) Raised Face (RF) HeightPCDFace Of Weld
ABCDEFGHIJ
1/215909.63021.346-34.9260.31.6
3/42010011.23826.75142.9269.91.6
12511012.74933.45450.8279.41.6
1 1/43211514.35942.25663.5288.91.6
1 1/24012515.96548.36073298.41.6
25015017.57860.36292.12120.71.6
2 1/26518020.7907368104.82139.71.6
38019022.310888.9681272152.41.6
3 1/29021522.3122101.670139.72177.81.6
410023022.3135114.375157.22190.51.6
512525522.3164141.387185.72215.91.6
615028023.9192168.387215.92241.31.6
820034527246219.1100269.92298.51.6
1025040528.6305273100323.823621.6
1230048530.2365323.81133812431.81.6
1435053533.4400355.6125412.82476.31.6
1640059535457406.4125469.92539.81.6
1845063538.1505457.2138533.42577.91.6
2050070041.3559508143584.226351.6
2460081546.1663610151692.22749.31.6

Types Of IBR Approved Flanges


IBR Approved Blind Flanges

IBR Approved Blind Flanges

IBR Approved Slip On Flanges

IBR Approved Slip On Flanges

IBR Approved Weld Neck Flanges

IBR Approved Weld Neck Flanges

IBR Socket Weld Flanges

IBR Socket Weld Flanges

IBR Plate Flanges

IBR Plate Flanges

IBR Lap Joint Flanges

IBR Lap Joint Flanges


IBR Approved Blind Flange Dimensions


IBR Approved Blind Flange Dimensions
NPS For (Normal Pipe Size)Outside Daimeter Of (O.D.)
(A)
Wall Thickness Of (B)
Daimeter Of Raised Face
(C)
(D)
(B.C.D.)
# Flanges Bolts
Holes
Daimeter Of Bolt Holes
Approx.
Weight In KG (Kilogram)
1/2"3-1/27/161-3/82-3/845/82
3/4"3-7/81/21-11/162-3/445/82
1"4-1/49/1623-1/845/82
1-1/4"4-5/85/82-1/23-1/245/83
1-1/2"511/162-7/83-7/845/83
2"63/43-5/84-3/443/44
2-1/2"77/84-1/85-1/243/47
3"7-1/215/165643/49
3-1/2"8-1/215/165-1/2783/413
4"915/166-3/167-1/283/417
5"1015/167-5/168-1/287/820
6"1118-1/29-1/287/827
8"13-1/21-1/810-5/811-3/487/847
10"161-3/1612-3/414-1/412167
12"191-1/41517121123
14"211-3/816-1/418-3/4121-1/8139
16"23-1/21-7/1618-1/221-1/4161-1/8187
18"251-9/162122-3/4161-1/4217
20"27-1/21-11/162325201-1/4283
24"321-7/827-1/429-1/2201-3/8415

Class 300 Approved Flange Table Face Types


Types of Flanges FacesDIN And EN 1092-1
(RF) For Raised FaceForm B1
(RF) For Raised FaceForm B1
DIN 2513 Female FlangesForm F
DIN 2512 Groove FlangesForm D
DIN 2513 Male FlangesForm E
(RF) For Raised FacForm B2
Without (RF) Raised FaceForm A
DIN2512 Tongue FlangesForm C


IBR Certificate For Flanges Application


  • IBR Approved Blind Flanges For Power Plants
  • IBR Pipe Flange For Fluid Piping
  • IBR Approved Flanges For Pulp And Paper Industry
  • IBR Flanges For Dairy And Food Processing
  • IBR Weld Neck Flange For Modern Architecture
  • PN16 IBR Approved Socket Weld Flanges For Oil And Gas Industry
  • IBR Carbon Steel Slip On Flanges For Heat Exchanger