Fastwell Fittings and Flanges Division
Call :

+91-9987870874

Mail :

info@fastwell.in

Fax :

+91-22-23855676

Titanium Grade 5 Flanges

ANSI/ ASME B16.5 Grade 5 Titanium Blind/ Weld Neck Flanges manufacturer And supplier In Mumbai, India


Titanium Grade 5 Flanges

Titanium fittings are used generally in a wide variety of applications and are divided into 2 grades. Titanium Grade 5 Flanges are one of these grades that display anti corrosive and rugged structures. They are flexible, have high tensile strength, and have high durability. DIN 3.7165 Plate Flange manufacturer In India recommends these fittings as they can withstand heavy load and high temperature application. Moreover, these Grade 5 Titanium Blind Flanges also offer stress corrosion cracking and oxidation resistance. Grade 5 Titanium Weld Neck Flanges are also resistant to localized corrosion such as pitting and crevice. 

Grade 5 Titanium Weld Neck Flanges are light in weight and have superior quality. They are also said to be leakproof and are used in many critical applications. ASTM B381 Ti Gr 5 Slip On Flanges are used in industries such as surgical implants, aircraft engines, hydraulic tubing, marine industry, airframe industry, and petrochemical industry. They also provide resistance to creep. UNS N56400 Socket Weld Flanges have a melting point of 1632 degrees C. they also display excellent weldability and formability. Since they have high strength the manufacturer can reduce the thickness of the wall which in turn makes them light in weight. 

Titanium Alloy Gr 5 Lap Joint Flanges can also be used in cement plants, sugar mills, architecture, power generation, hydrocarbon processing, and marine industry. Moreover, these ASME B381 Gr 5 Ti Pipe Flange can be used in fertilizer, chemical processing, cement, and petrochemical plants. They have higher mechanical strength and lower density. They also resist corrosion in watery media. When compared to the standard version this Gr 5 Titanium Raised Face Flanges has reduced the oxygen content. Furthermore, Titanium N56400 Threaded Flange is fully heat treatable with a solution heat treatment process.


Table Of Content:




Titanium Gr 5 Flanges Dimensions


NPS(O.D.) For
Outside Diameter		Minimum (Wall Thickness)
(T)		Diameter Of Raised Face (RF)
(R)		Number of Bolts HolesDia. of HolesB.C. For
(Bolt Circle)		SORF Bore I.D.
(SB)		WNRF Bore I.D.
(WB)		Diameter Of Hub Base
(H.B.)		Diameter of Hub Top
(H.T.)		SORF Length
(S.L.)		WNRF Length
(W.L.)
1⁄23.500.381.3840.622.380.880.621.190.840.561.81
3⁄43.880.441.6940.622.751.090.821.501.050.562.00
14.250.502.0040.623.121.361.051.941.320.622.12
11⁄44.620.562.5040.623.501.701.382.311.660.752.19
11⁄25.000.622.8840.623.881.951.612.561.900.812.38
26.000.693.6240.754.752.442.073.062.380.942.44
21⁄27.000.814.1240.755.502.942.473.562.881.062.69
37.500.885.0040.756.003.573.074.253.501.122.69
31⁄28.500.885.5080.757.004.073.554.814.001.192.75
49.000.886.1980.757.504.574.035.314.501.252.94
510.000.887.3180.888.505.665.056.445.561.383.44
611.000.948.5080.889.506.726.077.566.631.503.44
813.501.0610.6280.8811.758.727.989.698.631.693.94
1016.001.1212.75121.0014.2510.8810.0212.0010.751.883.94
1219.001.1915.00121.0017.0012.8812.0014.3812.752.124.44
1421.001.3116.25121.1218.7514.1413.2515.7514.002.194.94
1623.501.3818.50161.1221.2516.1615.2518.0016.002.444.94
1825.001.5021.00161.2522.7518.1817.2519.8818.002.625.44
2027.501.6223.00201.2525.0020.2019.2522.0020.002.815.62
2229.501.7525.25201.3827.2522.2221.2524.2522.003.075.82
2432.001.8127.25201.3829.5024.2523.2526.1224.003.195.94

Test Certificates

  • Raw Materials Certificate
  • EN 10204/3.1B,
  • Third Party Inspection Repor
  • 100% Radiography Test Report

Value Added Services

  • Hardness Test
  • Chemical Equipment
  • Flattening Test
  • Mechanical Testing Such as Tensile of Area
  • Pitting Resistance Test
  • Positive Material Identification – PMI Testing
  • Micro and MacroTest
  • Chemical Analysis – Spectro Analysis
  • Intergranular Corrosion (IGC) Test

Types Of Titanium Grade 5 Flanges


Titanium Gr 5 Socket Weld Flanges

Titanium Gr 5 Socket Weld Flanges

UNS N56400 Plate Flanges

UNS N56400 Plate Flanges

Grade 5 Titanium Lap Joint Flanges

Grade 5 Titanium Lap Joint Flanges

Grade 5 Ti Blind Flanges

Grade 5 Ti Blind Flanges

ASTM B381 Ti Gr 5 Slip On Flanges

ASTM B381 Ti Gr 5 Slip On Flanges

DIN 3.7165 Weld Neck Flanges

DIN 3.7165 Weld Neck Flanges

Titanium Alloy Gr 5 Threaded Flanges

Titanium Alloy Gr 5 Threaded Flanges

ASME B381 Gr 5 Ti Raised Face Flanges

ASME B381 Gr 5 Ti Raised Face Flanges

Gr 5 Titanium RTJ Flanges

Gr 5 Titanium RTJ Flanges


Ti Grade 5 Mechanical Properties


Element Yield Strength (0.2%Offset) Elongation Density Melting Point Tensile Strength
Titanium Grade 5 Flanges Psi – 128000 , MPa – 880 14 % 4.43 g/cm3 1632 °C (2970 °F) Psi – 138000 , MPa – 950

ANSI B16.5 Class 150 Titanium Grade 5 Flanges Chemical Composition


Grade C N O H Ti Fe
Titanium Grade 5 Flanges 0.10 maximum 0.05 maximum 0.25 maximum 0.015 maximum Bal 0.40 maximum

Titanium Alloy Gr 5 Flanges Elongation


Elongation (min. %)
Grade 5*Class A 10
Grade 5*Class B 10

Titanium Grade 5 Yield Strength


Yield Strength, min.
Grade Ksi MPa
Titanium Grade 5*Class A Flange 120 828
Titanium Grade 5*Class B Flange 120 828

Titanium Grade 5 Tensile Strength


Tensile Strength, min.
Grade ksi MPa
Titanium Grade 5*Class A Flange 130 895
Titanium Grade 5*Class B Flange 130 895

Ti Gr 5 Threaded Flanges Hardness


Hardness
Grade 5 *Class A 30–39 HRC
Grade 5 *Class B 30–39 HRC

Application Of ASTM B381 Grade F2 Flanges


  • DIN 3.7165 Plate Flange For Dairy And Food Processing
  • Titanium Alloy Gr 5 Lap Joint Flange For Power Plants
  • Titanium Grade 5 Flange For Modern Architecture
  • Grade 5 Titanium Blind Flange For Oil And Gas Industry
  • Grade 5 Titanium Weld Neck Flange For Fluid Piping
  • UNS N56400 Socket Weld Flange For Pulp And Paper Industry
  • ASTM B381 Ti Gr 5 Slip On Flange For Heat Exchanger


Titanium® Grade 5 Blind Flange Dimensions


Titanium® Grade 5 Blind Flange Dimensions
NPS For (Normal Pipe Size)Outside Daimeter Of (O.D.)
(A)		Wall Thickness Of (B)
Daimeter Of Raised Face
(C)		(D)
(B.C.D.)		# Flanges Bolts
Holes		Daimeter Of Bolt Holes
Approx.
Weight In KG (Kilogram)
1/2"3-1/27/161-3/82-3/845/82
3/4"3-7/81/21-11/162-3/445/82
1"4-1/49/1623-1/845/82
1-1/4"4-5/85/82-1/23-1/245/83
1-1/2"511/162-7/83-7/845/83
2"63/43-5/84-3/443/44
2-1/2"77/84-1/85-1/243/47
3"7-1/215/165643/49
3-1/2"8-1/215/165-1/2783/413
4"915/166-3/167-1/283/417
5"1015/167-5/168-1/287/820
6"1118-1/29-1/287/827
8"13-1/21-1/810-5/811-3/487/847
10"161-3/1612-3/414-1/412167
12"191-1/41517121123
14"211-3/816-1/418-3/4121-1/8139
16"23-1/21-7/1618-1/221-1/4161-1/8187
18"251-9/162122-3/4161-1/4217
20"27-1/21-11/162325201-1/4283
24"321-7/827-1/429-1/2201-3/8415

EN 1092-1 Titanium Grade 5 Forged Flanges Bolting Length


Size in (Inches)Size in (Millimeter)Number of BoltsBolt (UNC) SizeRF (Raised Face) Stud Length Stud (ISO) SizeMachine Flange Bolt Length
1/21541/255M1450
3/42041/265M1450
12541/265M1455
1 1/43241/270M1455
1 1/24041/270M1465
25045/885M1670
2 1/26545/890M1675
38045/890M1675
3 1/29085/890M1675
410085/890M1675
512583/495M2085
615083/4100M2085
820083/4110M2090
10250127/8115M24100
12300127/8120M24100
14350121135M27115
16400161135M27115
18450161 1/8145M30125
20500201 1/8160M30140
24600201 1/4170M33150

Face Types Of Titanium Gr 5 Flanges


Types of Flange Faces DIN And EN 1092-1
(RF) For Raised Fac Form B2
Without (RF) Raised Face Form A
DIN2512 Tongue Flange Form C
(RF) For Raised Face Form B1
(RF) For Raised Face Form B1
DIN 2513 Female Flange Form F
DIN 2512 Groove Flange Form D
DIN 2513 Male Flange Form E


Documentation

  • Fumigation Certificates
  • Guarantee Letter
  • Raw Material Test Reports
  • Fumigation Certificates
  • Heat Treatment Charts
  • Commercial Invoice which includes HS Code
  • QAP (Quality Assurance Plan)
  • NABL approved Laboratory Test Reports

List Of Machineries

  • Tee Beveling Machine
  • CNC Lath
  • Oil Fired Heat Treatment Furnace
  • Hydraulic Press 300 Tons Capacity
  • Radial Driling Machine
  • Elbow Beveling Machine
  • Conventional Machine
  • Tee Cold Forming Machines
  • Elbow Cold Forming Machines
  • Heat Treatment For Forged Fittings
  • Hydraulic Press 150 Tons Capacity
  • Portable Temperature Indicator

EN 1092-2 PN16 ASTM B381 UNS N56400 Flanges Tolerance Formula


Titanium Grade 5 FlangesType Of DaimeterTolerance List
(A) (O.D.) For Outside Diameter
  • When Outside Diameter is 24 Inch or less: ±1/16" (1.6 mm)
  • When Outside Diameter is over 24": ±1/8" (3.2 mm)
(D) (I.D.) For Inside Diameter
  • 10 Inch and smaller: ±1/32" (0.8 in mm)
  • 12 Inch thru 18": +1/8" (3.2 in mm)
  • 20 Inch and larger: -1/16" (1.6 in mm)
(B) Contact Face
  • 1/16" (RF): ±1/32" (0.8 mm)
  • 1/4" (RF), Tongue & Groove (male & female): ±1/64" (0.4 mm)
(J) Hub At Base Daimeter
  • When hub base is 24 inch or smaller: ±1/16" (1.6 mm)
  • When hub base is over 24": ±1/8" (3.2 mm)
(H) Diameter of hub at point of welding
  • 5 inch and smaller: +3/32" (2.4 mm), -1/32" (0.8 mm)
  • 6 inch and larger: +5/32" (4.0 mm), -1/32 (0.8 mm)
(P) Drilling
  • Bolt circle (BC): ±1/16" (1.6 mill.)
  • Bolt hole (BH) spacing: ±1/32" (0.8 mill.)
  Eccentricity of bolt circle (bc) with respect to facing
  • 2 1/2" and smaller ±1/32" (0.8 mm) maximum
  • 3" and larger ±1/16" (1.6 mm) maximum
(C) Wall Thickness
  • 18 inch and smaller: ±1/8" (3.2 mill.), -0"
  • 20 inch and larger: ±3/16" (4.8 mill.), -0"
(K) hub Length
  • 10 Inch and smaller: ±1/16" (1.6 mm)
  • 12 Inch and larger: ±1/8" (3.2 mm)

Know More About EN 1092-1 ASTM B381 Ti Gr 5 Slip On Flanges Dimensions/ Weight & Thickness Chart/ Pressure Rating And Price List Ex Mumbai


Titanium Grade 5 Plate Flanges Pressure Rating


Temperature In °F150# According To ASME B16.5300# According To ASME B16.5400# According To ASME B16.5600# According To ASME B16.5900# According To ASME B16.51500# According To ASME B16.52500# According To ASME B16.5
-20 to 1002757209601440216036006000
2002306008001200180030005000
3002055407201080162027004500
400190495660995149024854140
500170465620930139523303880
600140435580875131021853640
650125430575860129021503580
700110425565850127521253540
75095415555830124520753460
80080405540805121020153360
85065395530790119019803300
90050390520780116519453240
95035380510765114519103180
10002032043064096516052675
10502031041061592515452570
11002025534551577012852145
1150202002654005959951655
1200201552053104657701285
125020115150225340565945
13002085115170255430715
1350206080125185310515
140020506595145240400
145015354570105170285
15001025355580135230

AISI Titanium Gr 5 Flanges Length Chart


(NPS) For Nominal Pipe Size In
(inches)		As Per ASME B16.5 Class 150
Flange Diameter
In (inch)		Bolts Number
Bolt Diameter
In (inch)		Bolt Holes (B.H.) Diameter In
(inch)		Bolt Circle (B.C.)
In(inch)
1/43-3/841/20.622-1/4
1/23-1/241/20.622-3/8
3/43-7/841/20.622-3/4
14-1/441/20.623-1/8
1-1/44-5/841/20.623-1/2
1-1/2541/20.623-7/8
2645/80.754-3/4
2-1/2745/80.755-1/2
37-1/245/80.756
3-1/28-1/285/80.757
4985/80.757-1/2
51083/40.888-1/2
61183/40.889-1/2
813-1/283/40.8811-3/4
1016127/8114-1/4
1219127/8117
14211211.1218-3/4
1623-1/21611.1221-1/4
1825161-1/81.2522-3/4
2027-1/2201-1/81.2525
2432201-1/41.3829-1/2

AWWA C207 UNS N56400 Socket Weld Flanges manufacturer According To EN, DIN, BS Standard, Check Specification List Of BS 4504 DIN 3.7165 Plate Flange


DIN 86029 PN10 Grade 5 Titanium Flanges Material Specification


Specification Checklist Titanium Grade 5 Flanges
Pressure Class 150 LB To 2500 LB.
Standard And Dimensions DIN 2501/ DIN 2527/ JIS/ ISO/ P235GH/ API/ DIN 2561/ EN 1092-1/ EN 1092-2
Contact us today for Types Of Ti 5 Flanges Threaded/ Socket Weld/ Blind/ Slip On/ Reducing/ Weld Neck/ Lap Joint
Flange Face Type Flat Face (FF)
Raised Face (RF)
Ring Type Joint (RTJ)
Size List NPS 1⁄₂"/ 1/3"/ 1"/ 2"/ 3"/ 4"/ 5"/ 6"/ 7"/ 8"/ 9" 10" To NPS 12”
Wall Thickness Schedule 40 & Schedule 80

SB381 Ti Grade 5 WN Flange Dimensions


SB381 Ti Grade 5 WN Flange Dimensions
Size (NPS) in Inches NPS (Normal Pipe Size) Size in MillimeterOuter Diameter For (O.D.) Thickness Of Weld Neck FlangeHub Outer DiameterWeld Neck Outer DiameterLength Of ASME B16.5 Welding NeckDaimeter Of WN BoreDiameter Of RF (Raised Face) Raised Face (RF) HeightPCDFace Of Weld
ABCDEFGHIJ
1/215909.63021.346-34.9260.31.6
3/42010011.23826.75142.9269.91.6
12511012.74933.45450.8279.41.6
1 1/43211514.35942.25663.5288.91.6
1 1/24012515.96548.36073298.41.6
25015017.57860.36292.12120.71.6
2 1/26518020.7907368104.82139.71.6
38019022.310888.9681272152.41.6
3 1/29021522.3122101.670139.72177.81.6
410023022.3135114.375157.22190.51.6
512525522.3164141.387185.72215.91.6
615028023.9192168.387215.92241.31.6
820034527246219.1100269.92298.51.6
1025040528.6305273100323.823621.6
1230048530.2365323.81133812431.81.6
1435053533.4400355.6125412.82476.31.6
1640059535457406.4125469.92539.81.6
1845063538.1505457.2138533.42577.91.6
2050070041.3559508143584.226351.6
2460081546.1663610151692.22749.31.6

We Stock And exporter Of MSS SP-44 Titanium Alloy Gr 5 Lap Joint Flanges, Buy DIN 86029 PN10 ASME B381 Gr 5 Ti Pipe Flange In Your Sizes And Save Cost

Titanium Grade 5 Flanges Price List India


Type Of Flanges Size SCH Class Material Price In INR (India) Per Piece
Blind Flange 3/4" Sch 40 150 Titanium Grade 5 298.00
- 3/4" Sch 40 150 - 435.00
- 1" Sch 40 150 - 576.00
- 1-1/2" Sch 40 150 - 762.00
- 2" Sch 40 150 - 987.00
- 3" Sch 40 150 - 1123.00
- 4" Sch 40 150 - 1263.00
Blind Flange 6" Sch 40 150 - 1646.00
Blind Flange 8" Sch 40 150 - 1872.00
Slip On Flange 1 /1/2" 80 150 Titanium Grade 5 434.00
- 2" 80 150 - 653.00
- 3" 80 150 - 873.00
- 4" 80 150 - 983.00
- 6" 80 150 - 1346.00
Slip On Flange 8" 80 150 - 1675.00
Socket Weld Flange 3/4" SCH XS 300 Titanium Grade 5 453.00
- 1” SCH XS 300 - 567.00
- 1-1/2" SCH XS 300 - 764.00
- 2" SCH XS 300 - 874.00
- 3" SCH XS 300 - 987.00
- 4" SCH XS 300 - 1243.00
Socket Weld Flange 6" SCH XS 300 - 1453.00
Weld Neck Flange 2" SCH STD 150 Titanium Grade 5 1764.00
- 3" SCH STD 150 - 1872.00
- 4" SCH STD 150 - 2182.00
- 6" SCH STD 150 - 2463.00
- 8" SCH STD 150 - 2832.00
- 10" SCH STD 150 - 3218.00
Weld Neck Flange 12" SCH STD 150 Titanium Grade 5 3849.00

One Of India’s Largest Manufacturer Of Titanium Grade 5 Flanges. For final Ti Gr 5 Blind Flanges Price List Please Call on +91-9987870874 or drop an Email to info@fastwell.in.

Weight Formula Of Gr. 5 Ti Flanges


Nominal Pipe Size For (NPS)Slip On Flange (SORF)Threaded Flange (NPT)Socket Weld Flange (SWRF)Lap Joint Flange (Loose)Blind Flange (BLRF)Weld Neck Flange (WNRF)
½112122
¾222222
1222223
1¼333333
1½333344
2555556
2½8888710
39999911.5
3½111211111312
4131313131716.5
5151515152021
6191919192726
8303030304742
10434343437054
126464646412388
14909090105140114
161069898140180140
18130130130160220165
20165165165195285197
22185185185245355225
24220220220275430268

supplier Of Schedule 40 Gr 5 Titanium Raised Face Flanges As Per Class 150 Of Renowned manufacturer With ISO Test Certificate, Refer Bolting Length Of Class 300 Titanium N56400 Threaded Flange.

ASME SB564 Titanium Gr 5 Flanges Torque


Flanges Size in (Inches)Flanges Size in (Millimeter)Radial Projection (Maximum)
No Deeper Than the Bottom In MMDeeper Than the Bottom In MM
1/2153.01.5
3/4203.01.5
1253.01.5
1 1/4323.01.5
1 1/2403.01.5
2503.01.5
2 1/2653.01.5
3804.51.5
3 1/2906.03.0
41006.03.0
51256.03.0
61506.03.0
82008.04.5
102508.04.5
123008.04.5
143508.04.5
1640010.04.5
1845012.06.0
2050012.06.0
2460012.06.0

ANSI/ ASME B16.5 Class 300 Titanium Grade 5 Screwed Flange Gasket Chart


NPS For (Normal Pipe Size)Gasket (I.D.) Inside Daimeter
Gasket (O.D.) Outside Daimeter
#150LB #300LB #400LB #600LB #900LB
1/2"0.841.8752.1252.1252.1252.50
3/4"1.062.252.6252.6252.6252.75
1"1.312.6252.8752.8752.8753.125
1 1/4"1.6633.253.253.253.50
1 1/2"1.913.3753.753.753.753.875
2"2.384.1254.3754.3754.3755.625
2 1/2"2.884.8755.1255.1255.1256.50
3"3.505.3755.8755.8755.8756.625
4"4.506.8757.1257.007.6258.125
5"5.567.758.508.3759.509.75
6"6.628.759.8759.7510.5011.375
8"8.621112.12512.0012.62514.125
10"10.7513.37514.2514.12515.7517.125
12"12.7516.12516.62516.5018.0019.625

Werkstoff Nr. 3.7165 Slip On Flanges Dimensions With Size


Werkstoff Nr. 3.7165 Slip On Flanges Dimensions With Size
Normal Pipe Size For (NPS) (Inside Diameter) For I.D. O.D. For (Outside Daimeter) B.C. For (Circle Bolt) Raised
(R)		 RF For (Raised Face) H For (Hight) Raised Face Wall Thickness Thickness1 Flat Face (FF)
(Thickness2)		 Bolts Holes For
(B.C.)		 Number Of Bolt Hole
(B.H.)
1/2 0.88 3.50 2.38 1.38 .063 1.19 .62 .38 .56 .62 4
3/4 1.09 3.88 2.75 1.69 .063 1.50 .62 .44 .56 .62 4
1 1.36 4.25 3.12 2.00 .063 1.94 .69 .50 .63 .62 4
1-1/4 1.70 4.62 3.50 2.50 .063 2.31 .81 .56 .75 .62 4
1-1/2 1.97 5.00 3.88 2.88 .063 2.56 .88 .62 .82 .62 4
2 2.44 6.00 4.75 3.62 .063 3.06 1.00 .69 .94 .75 4
2-1/2 2.94 7.00 5.50 4.12 .063 3.56 1.12 .82 1.06 .75 4
3 3.57 7.50 6.00 5.00 .063 4.25 1.19 .88 1.13 .75 4
3-1/2 4.07 8.50 7.00 5.50 .063 4.81 1.25 .88 1.19 .75 8
4 4.57 9.00 7.50 6.19 .063 5.31 1.31 .88 1.25 .75 8
5 5.66 10.00 8.50 7.31 .063 6.44 1.44 .88 1.38 .88 8
6 6.72 11.00 9.50 8.50 .063 7.56 1.56 .94 1.50 .88 8
8 8.72 13.50 11.75 10.62 .063 9.69 1.75 1.06 1.69 .88 8
10 10.88 16.00 14.25 12.75 .063 12.00 1.94 1.13 1.88 1.00 12
12 12.88 19.00 17.00 15.00 .063 14.38 2.19 1.19 2.13 1.00 12
14 14.14 21.00 18.75 16.25 .063 15.75 2.25 1.32 2.19 1.12 12
16 16.16 23.50 21.25 18.50 .063 18.00 2.50 1.38 2.44 1.12 16
18 18.18 25.00 22.75 21.00 .063 19.88 2.69 1.50 2.63 1.25 16
20 20.20 27.50 25.00 23.00 .063 22.00 2.88 1.63 2.83 1.25 20
22 22.22 29.50 27.25 25.25 .063 24.25 3.13 1.75 3.07 1.38 20
24 24.25 32.00 29.50 27.25 .063 26.12 3.25 1.82 3.19 1.38 20

Look What We Supply And Where ?:


Malaysia, United Kingdom -UK, Europe, UAE

Titanium Grade 5 Flanges

United Kingdom -UK, Europe, Malaysia, UAE

Philippines, Indonesia, Dammam -KSA,

Grade 5 Titanium Blind Flanges

Indonesia, Dammam -KSA, Philippines

Qatar, Europe, Thailand, France

Grade 5 Titanium Weld Neck Flanges

Qatar, Thailand, France, Europe

Bangladesh, Germany, Finland, USA

ASTM B381 Ti Gr 5 Slip On Flanges

Bangladesh, USA, Germany, Finland

South Africa, Brazil, Saudi Arabia (KSA), Kuwait

UNS N56400 Socket Weld Flanges

Saudi Arabia (KSA), South Africa, Brazil, Kuwait

Australia, Nigeria, Turkey, UK, Belgium, Egypt

DIN 3.7165 Plate Flange

Nigeria, Turkey, Egypt, UK, Australia, Belgium

Hong Kong, Spain, Oman, Mexico, Poland, Japan

Titanium Alloy Gr 5 Lap Joint Flanges

Mexico, Hong Kong, Poland, Oman, Spain, Japan

Iran, Italy, Chile, Singapore, Canada, China

ASME B381 Gr 5 Ti Pipe Flange

Canada, Iran, Italy, Singapore, Chile, China


Material


Our Products