MSS SP-75 65 Welded Reducing Tee has the ability to perform well under load and tolerance to high pressure makes them suitable options for power generation and offshore industries. ASME SA860 WPHY 65 Seamless Fittings are also used in transferring fluids like water and oil along with gas under high pressure. The surface of these fittings is flawless and smooth. This is because WPHY 65 Stub End is surface treated with anti-corrosion oil, anti-rust oil, transparent oil, or black oil paint. The seamless fittings are available in the size range of ½ inch to 10 inches. Whereas, the welded fittings are available in the size range of ½ inch to 48 inches.
A860 WPHY 65 Concentric Reducer is generally used to connect 2 pipes of different diameters. They are used in bitumen upgraders and heavy oil refineries. The price range of these fittings varies between Rs. 15000 to Rs. 40000. They are supplied to various middle eastern, European, and South Asian countries. ASTM A860 WPHY 65 Pipe Fittings are tested on sight and in the laboratory for their properties and efficiency. A number of tests are performed on raw material as well as on the final product. Our assured quality and competitive prices have helped us in building up our reputation over the years.
Looking for fittings to be used in applications with high pressure and high strength? We might just have the right option for you. WPHY 65 Fittings are manufactured using WPHY standard and are resistant to corrosion with high tensile strength. They offer good toughness and high durability. They can withstand high pressure and are therefore used in applications that require high strength at increased pressure. According to Carbon Steel WPHY 65 Buttweld Elbow manufacturer In India, they are cost efficient due to enhanced durability and extended service life.
Normal Pipe Size For (NPS) | O.D. For (Outside Daimeter) of barrel | Length Of (F) | Radius Of(R) | Diameter Of (G) | ||
---|---|---|---|---|---|---|
(Min.) | (Max.) | ASME B16.9 Long Pattern | ASME B16.9 Short Pattern | |||
1/2″ | 20.5 | 22.8 | 76 | 51 | 3 | 35 |
3/4″ | 25.9 | 28.1 | 76 | 51 | 3 | 43 |
1″ | 32.6 | 35.0 | 102 | 51 | 3 | 51 |
1 1/4″ | 41.4 | 43.6 | 102 | 51 | 5 | 64 |
1 1/2″ | 47.5 | 49.9 | 102 | 51 | 6 | 74 |
2″ | 59.5 | 62.4 | 152 | 64 | 8 | 92 |
2 1/2″ | 72.2 | 75.3 | 152 | 64 | 8 | 105 |
3″ | 88.1 | 91.3 | 152 | 64 | 10 | 127 |
3 1/2″ | 100.8 | 104.0 | 152 | 76 | 10 | 140 |
4″ | 113.5 | 116.7 | 152 | 76 | 11 | 157 |
5″ | 140.5 | 144.3 | 203 | 76 | 11 | 186 |
6″ | 167.5 | 171.3 | 203 | 89 | 13 | 216 |
8″ | 218.3 | 222.1 | 203 | 102 | 13 | 270 |
10″ | 272.3 | 277.2 | 254 | 127 | 13 | 324 |
12″ | 323.1 | 328.0 | 254 | 152 | 13 | 381 |
14″ | 354.8 | 359.9 | 305 | 152 | 13 | 413 |
16″ | 405.6 | 411.0 | 305 | 152 | 13 | 470 |
18″ | 456.0 | 462.0 | 305 | 152 | 13 | 533 |
20″ | 507.0 | 514.0 | 305 | 152 | 13 | 584 |
22″ | 558.0 | 565.0 | 305 | 152 | 13 | 641 |
24″ | 609.0 | 616.0 | 305 | 152 | 13 | 692 |
Normal Pipe Size For (NPS) For ANSI/ASME B16.9 | 10S Schedule | 40S Schedule | 80S Schedule | ||||||
Buttweld 90 Degree Elbow | Buttweld 45 Degree Elbow | B16.9 Buttweld Equal Tee | Buttweld 90 Deg Elbows | Buttweld 45 Deg Elbows | B16.9 Buttweld Equal Tee | Buttweld 90 Degree Elbow | Buttweld 45 Degree Elbow | ASME B16.9 Buttweld Equal Tee | |
8 | 0.02 | 0.01 | 0.03 | 0.03 | 0.02 | 0.06 | 0.04 | 0.03 | 0.07 |
10 | 0.03 | 0.02 | 0.05 | 0.03 | 0.02 | 0.03 | 0.06 | 0.04 | 0.09 |
15 | 0.06 | 0.03 | 0.09 | 0.08 | 0.04 | 0.10 | 0.10 | 0.05 | 0.14 |
20 | 0.07 | 0.03 | 0.13 | 0.08 | 0.04 | 0.17 | 0.11 | 0.05 | 0.20 |
25 | 0.14 | 0.08 | 0.28 | 0.15 | 0.11 | 0.29 | 0.22 | 0.14 | 0.38 |
32 | 0.23 | 0.11 | 0.49 | 0.26 | 0.17 | 0.59 | 0.40 | 0.23 | 0.68 |
40 | 0.30 | 0.17 | 0.68 | 0.40 | 0.23 | 0.86 | 0.51 | 0.29 | 1.02 |
50 | 0.50 | 0.25 | 0.85 | 0.70 | 0.4 | 1.28 | 0.91 | 0.59 | 1.59 |
65 | 0.85 | 0.48 | 1.41 | 1.40 | 0.77 | 2.19 | 1.81 | 0.99 | 3.13 |
80 | 1.25 | 0.63 | 1.77 | 2.20 | 1.08 | 3.31 | 2.97 | 1.50 | 4.45 |
90 | 1.70 | 0.75 | 2.67 | 2.83 | 1.42 | 4.08 | 4.00 | 2.00 | 5.44 |
100 | 2.10 | 1.08 | 3.46 | 4.47 | 2.09 | 5.27 | 6.18 | 2.81 | 7.71 |
150 | 5.45 | 2.72 | 8.07 | 10.89 | 5.44 | 10.99 | 16.32 | 8.16 | 13.61 |
200 | 10.20 | 5.33 | 15.65 | 21.54 | 10.77 | 20.91 | 33.11 | 16.56 | 28.12 |
250 | 18.15 | 9.75 | 26.46 | 38.56 | 19.27 | 35.38 | 51.71 | 25.86 | 49.90 |
300 | 25.80 | 13.62 | 39.46 | 59.42 | 29.71 | 62.14 | 79.38 | 39.69 | 83.91 |
Normal Pipe Size For (NPS) For ANSI/ ASME B16.9 | 10S Schedule | 40S Schedule | 80S Schedule | ||||||
Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | |
40x.25 | 0.19 | 0.19 | 0.60 | 0.26 | 0.26 | 0.76 | 0.34 | 0.34 | 0.90 |
50x25 | 0.28 | 0.28 | 0.73 | 0.40 | 0.40 | 1.10 | 0.54 | 0.54 | 1.37 |
50x40 | 0.31 | 0.31 | 0.76 | 0.45 | 0.45 | 1.15 | 0.59 | 0.59 | 1.43 |
80x.50 | 0.55 | 0.55 | 1.56 | 1.00 | 1.00 | 2.91 | 1.79 | 1.79 | 3.91 |
100x50 | 0.78 | 0.78 | 2.94 | 1.50 | 1.50 | 4.48 | 1.95 | 1.95 | 6.55 |
100x80 | 0.87 | 0.87 | 3.04 | 1.74 | 1.74 | 4.64 | 2.33 | 2.33 | 6.79 |
150x80 | 1.82 | 1.82 | 6.86 | 3.95 | 3.95 | 9.68 | 5.51 | 5.51 | 11.57 |
150x100 | 1.96 | 1.96 | 7.10 | 4.07 | 4.07 | 11.94 | 5.96 | 5.96 | 11.97 |
200x100 | 3.01 | 3.01 | 13.46 | 6.55 | 6.55 | 17.98 | 9.23 | 9.23 | 24.18 |
200x150 | 3.19 | 3.19 | 14.08 | 6.74 | 6.74 | 18.82 | 10.12 | 10.12 | 25.31 |
Specification Chart Of | ASTM A860 WPHY 65 Fittings |
---|---|
Chemical Compatibility | Carbon (≤0.20*A), Manganese (1.00-1.45), Nickel (≤0.50*C), Phosphorus (≤0.030), Sulfur (≤0.010), Chromium (≤0.30*C), Molybdenum (≤0.25*C), Silicon (0.15-0.40*B). |
Size | BW (1/2” TO 48”) SMLS (1” TO 36”) |
Standard Dimensions | ANSI B16.28/ IS B2313/ ASME B16.9/ MSS-SP-43 Type B/ MSS-SP-43 Type A/ JIS B2312 |
Thickness Calculation Online: | SCH80, SCH100 XS, SCH 5S, SCH40, SCH60, SCH140, SCH120, SCH160, SCH20, SCH30. |
Name Of Fittings Machine | Sand-blasting machine/ Bending machine/ Pushing Machine/ Press machine/ Electric bevelling machine etc |
Application: | Water Pipeline Industry Chemical Industry Natural Gas Industry Nuclear Power Plant |
Pipe Fittings Connection | Welding |
Available Type Of WPHY 65 | Reducer/ Stub End/ Pipe Bend/ End Cap/ Elbow/ Tee |
Manimum Pressure | Class 150 |
Normal Size Of Pipe | Outside Dai Of (D) | 90 degree (Long Radius) Center-to-End (A) | 45 degree (Long Radius) Center-to-End (B) | 90 degree (3D) Center-to-End (A) | 45 degree (3D) Center-to-End (B) |
1/2 | 21.3 | 38 | 16 | – | – |
3/4 | 26.7 | 38 | 19 | 57 | 24 |
1 | 33.4 | 38 | 22 | 76 | 31 |
1¼ | 42.2 | 48 | 25 | 95 | 39 |
1½ | 48.3 | 57 | 29 | 114 | 47 |
2 | 60.3 | 76 | 35 | 152 | 63 |
2½ | 73 | 95 | 44 | 190 | 79 |
3 | 88.9 | 114 | 51 | 229 | 95 |
3½ | 101.6 | 133 | 57 | 267 | 111 |
4 | 114.3 | 152 | 64 | 305 | 127 |
5 | 141.3 | 190 | 79 | 381 | 157 |
6 | 168.3 | 229 | 95 | 457 | 189 |
8 | 219.1 | 305 | 127 | 610 | 252 |
10 | 273 | 381 | 159 | 762 | 316 |
12 | 323.8 | 457 | 190 | 914 | 378 |
14 | 355.6 | 533 | 222 | 1067 | 441 |
16 | 406.4 | 610 | 254 | 1219 | 505 |
18 | 457 | 686 | 286 | 1372 | 568 |
20 | 508 | 762 | 318 | 1524 | 632 |
22 | 559 | 838 | 343 | 1676 | 694 |
24 | 610 | 914 | 381 | 1829 | 757 |
26 | 660 | 991 | 406 | 1981 | 821 |
28 | 711 | 1067 | 438 | 2134 | 883 |
30 | 762 | 1143 | 470 | 2286 | 964 |
32 | 813 | 1219 | 502 | 2438 | 1010 |
34 | 864 | 1295 | 533 | 2591 | 1073 |
36 | 914 | 1372 | 565 | 2743 | 1135 |
38 | 965 | 1448 | 600 | 2896 | 1200 |
40 | 1016 | 1524 | 632 | 3048 | 1264 |
42 | 1067 | 1600 | 660 | 3200 | 1326 |
44 | 1118 | 1676 | 695 | 3353 | 1389 |
46 | 1168 | 1753 | 727 | 3505 | 1453 |
48 | 1219 | 1829 | 759 | 3658 | 1516 |
Yield Strength, minimum | |
---|---|
ksi | MPa |
65 | 450 |
ASTM A860 WPHY 65 Fittings Marking includes ANSI Or ASME/ ASA Code
Elongation, minimum | |
---|---|
% | 20 |
O.D. (Outside Daimeter) And I.D. (Inside Daimeter) | Equivalent List | Diameter Of Nominal Pipe | Threads Size In Inches |
5/16 | 0.313 | 1/16 | 27 |
13/32 | 0.405 | 1/8 | 27 |
35/64 | 0.540 | 1/4 | 18 |
43/64 | 0.675 | 3/8 | 18 |
27/32 | 0.840 | 1/2 | 14 |
1-3/64 | 1.050 | 3/4 | 14 |
1-5/16 | 1.315 | 1 | 11-1/2 |
1-21/32 | 1.660 | 1-1/4 | 11-1/2 |
1-29/32 | 1.900 | 1-1/2 | 11-1/2 |
2-3/8 | 2.375 | 2 | 11-1/2 |
2-7/8 | 2.875 | 2-1/2 | 8 |
3-1/2 | 3.500 | 3 | 8 |
4 | 4.000 | 3-1/2 | 8 |
4-1/2 | 4.500 | 4 | 8 |
ASTM A860/ 860M | Yield Strength, (minimum) | Tensile Strength | Elongation, (minimum) | Cv, avg./(minimum) | |||
---|---|---|---|---|---|---|---|
Grade | ksi | MPa | ksi | MPa | % | ft*lbs | J |
WPHY 65 Fittings | 65 | 450 | 77-102 | 530-705 | 20 | 30/25 | 40/34 |
Type Of Fittings | Size | SCH | Material | Price In INR (India) Per Piece |
---|---|---|---|---|
ASTM A860 WPHY 65 Tee | 1/2" | Sch 40 | - | 124.00 |
Equal Tee | 3/4" | Sch 40 | - | 203.00 |
Equal Tee | 1" | Sch 40 | - | 297.00 |
Equal Tee | 1 1/4" | Sch 40 | - | 409.00 |
Equal Tee | 2" | Sch 40 | - | 584.00 |
90 Deg Elbow | 1/2" | Sch 40 | - | 238.00 |
90 Deg Elbow | 3/4" | Sch 40 | - | 399.00 |
90 Deg Elbow | 1" | Sch 40 | - | 468.00 |
90 Deg Elbow | 1 1/4" | Sch 40 | - | 678.00 |
90 Deg Elbow | 2" | Sch 40 | - | 790.00 |
90 Deg Elbow | 4" | Sch 40 | - | 890.00 |
ASTM A860 WPHY 65 Reducer | 3/4 X 1/2" | Sch 40 | - | 250.00 |
Concentric Reducer | 1 X 1/2" | Sch 40 | - | 357.00 |
Concentric Reducer | 1 X 3/4" | Sch 40 | - | 458.00 |
Concentric Reducer | 3 X 2" | Sch 40 | ASTM A860 WPHY 65 | 587.00 |
We Are Renowned Wphy 65 Fittings Manufacturer In India. For final ASTM A860 WPHY 65 Fittings Price List Please Call on +91-9987870874 or drop an Email to info@fastwell.in.
Standard Of Pipe | Specification | . Bauart 5 | 2,5D | |
---|---|---|---|---|
Size | Dia. [Outside Daimeter] | CLR | CLR | CLR |
20 | 26,9 | 110 | 67 | |
25 | 33,7 | 110 | 84 | |
32 | 42,4 | 110 | 106 | |
40 | 48,3 | 110 | 212 | |
50 | 60,3 | 125 | 151 | |
65 | 76,1 | 175 | 190 | |
80 | 88,9 | 205 | 222 | |
100 | 114,3 | 270 | 286 | |
125 | 139,7 | 330 | 350 | |
150 | 168,3 | 390 | 421 | |
200 | 219,1 | 510 | ||
250 | 273 | 650 | ||
300 | 323,9 | 775 | ||
350 | 355,6 | 850 | ||
400 | 406,4 | 970 | ||
500 | 508 | 1245 |
For all Buttweld Pipe fittings | ASTM A860 WPHY 65 Fittings | |||
NPS Of End Cap | O.D. For (Outside Daimeter) Ø at Bevel | I.D. For (Inside Daimeter) Ø at End | Wall Thick. t / t1 |
Overall Length (E) |
1/2 a 2 1/2 | 1 | 0,8 | Not | 4 |
3 a 3 1/2 | 1 | 1,6 | less | 4 |
4 | +2 -1 | 1,6 | than | 4 |
5 a 6 | +3 -1 | 1,6 | 87,50% | 7 |
8 | 2 | 1,6 | of nominal | 7 |
10 | +4 -3 | 3,2 | tickness | 7 |
12 a 18 | +4 -3 | 3,2 | 7 | |
20 a 24 | +6 -5 | 4,8 | 7 | |
26 a 30 | +7 -5 | 4,8 | 10 | |
32 a 48 | +7 -5 | 4,8 | 10 |
Tensile Strength | |
---|---|
ksi | MPa |
77-102 | 530-705 |
RCD Reiso Code | BIG Ø | SMALL Ø | Hight (H) MM | Theoretical Weight In KG (Kilogram) | ||||
---|---|---|---|---|---|---|---|---|
(DN) | (D) MM | Thickness Of (S) In MM. | (DN) | (D) MM | Thickness Of (S) MM | |||
27 21 | 3/4 | 26.9 | 2.3 | 1/2 | 21.3 | 2.0 | 38 | 0.08 |
33 21 | 1 | 33.7 | 2.6 | 1/2 | 21.3 | 2.0 | 50 | 0.09 |
33 27 | 3/4 | 26.9 | 2.3 | 0.09 | ||||
42 21 | 1"1/4 | 42.4 | 2.6 | 1/2 | 21.3 | 2.0 | 50 | 0.12 |
42 27 | 3/4 | 26.9 | 2.3 | 0.13 | ||||
42 33 | 1 | 33.7 | 2.6 | 0.14 | ||||
*48 21 | 1"1/2 | 48.3 | 2.6 | 1/2 | 21.3 | 2.0 | 64 | 0.18 |
48 27 | 3/4 | 26.9 | 2.3 | 0.19 | ||||
48 33 | 1 | 33.7 | 2.6 | 0.20 | ||||
48 42 | 1"1/4 | 42.4 | 2.6 | 0.20 | ||||
60 27 | 2 | 60.3 | 2.9 | 3/4 | 26.9 | 2.3 | 76 | 0.30 |
60 33 | 1 | 33.7 | 2.6 | 0.31 | ||||
60 42 | 1"1/4 | 42.4 | 2.6 | 0.32 | ||||
60 48 | 1"1/2 | 48.3 | 2.6 | 0.33 | ||||
76 33 | 2"1/2 | 76.1 | 2.9 | 1 | 33.7 | 2.6 | 90 | 0.40 |
76 42 | 1"1/4 | 42.4 | 2.6 | 0.47 | ||||
76 48 | 1"1/2 | 48.3 | 2.6 | 0.48 | ||||
76 60 | 2 | 60.3 | 2.6 | 0.49 | ||||
89 42 | 3 | 88.9 | 3.2 | 1"1/4 | 42.4 | 2.6 | 90 | 0.55 |
89 48 | 1"1/2 | 48.3 | 2.6 | 0.61 | ||||
89 60 | 2 | 60.3 | 2.9 | 0.62 | ||||
89 76 | 2"1/2 | 76.1 | 2.9 | 0.63 | ||||
114 48 | 4 | 114.3 | 3.6 | 1"1/2 | 48.3 | 2.6 | 100 | 0.85 |
114 60 | 2 | 60.3 | 2.9 | 0.98 | ||||
114 76 | 2"1/2 | 76.1 | 2.9 | 1.00 | ||||
114 89 | 3 | 88.9 | 3.2 | 1.02 | ||||
139 60 | 5 | 139.7 | 4.0 | 2 | 60.3 | 2.9 | 127 | 1.60 |
139 76 | 2"1/2 | 76.1 | 2.9 | 1.70 | ||||
139 89 | 3 | 88.9 | 3.2 | 1.74 | ||||
139 114 | 4 | 114.3 | 3.6 | 1.76 | ||||
*168 76 | 6 | 168.3 | 4.5 | 2"1/2 | 76.1 | 2.9 | 140 | 2.60 |
168 89 | 3 | 88.9 | 3.2 | 2.70 | ||||
168 114 | 4 | 114.3 | 3.6 | 2.82 | ||||
168 139 | 5 | 139.7 | 4.0 | 2.94 | ||||
219 114 | 8 | 219.1 | 6.3 | 4 | 114.3 | 3.6 | 152 | 5.03 |
219 139 | 5 | 139.7 | 4.0 | 5.12 | ||||
219 168 | 6 | 168.3 | 4.5 | 5.18 | ||||
*273 114 | 10 | 273.0 | 6.3 | 4 | 114.3 | 3.6 | 178 | 7.00 |
*273 139 | 5 | 139.7 | 4.0 | 7.20 | ||||
273 168 | 6 | 168.3 | 4.5 | 7.40 | ||||
273 219 | 8 | 219.1 | 6.3 | 7.55 | ||||
323 168 | 12 | 323.9 | 7.1 | 6 | 168.3 | 4.5 | 203 | 11.00 |
323 219 | 8 | 219.1 | 6.3 | 11.10 | ||||
323 273 | 10 | 273 | 6.3 | 11.20 |
WPHY 65 Fittings
United Kingdom -UK, Europe, Malaysia, UAE
Carbon Steel WPHY 65 Buttweld Elbow
Indonesia, Dammam -KSA, Philippines
MSS SP-75 65 Welded Reducing Tee
Qatar, Thailand, France, Europe
ASME SA860 WPHY 65 Seamless Fittings
Germany, Bangladesh, USA, Finland
WPHY 65 Stub End
Brazil, Saudi Arabia (KSA), South Africa, Kuwait
A860 WPHY 65 Concentric Reducer
Egypt, UK, Turkey, Nigeria, Australia, Belgium
ASTM A860 WPHY 65 Pipe Fitting
Spain, Mexico, Poland, Hong Kong, Oman, Japan
Carbon Steel WPHY 65 Fitting
Italy, Singapore, Iran, Canada, Chile, China
ASTM A860 WPHY 65 Fittings Chemical Composition | |
---|---|
Aluminum | ≤0.06 |
Titanium | ≤0.05 |
Nickel | ≤0.50*C |
Molybdenum | ≤0.25*C |
Copper | ≤0.35*C |
Chromium | ≤0.30*C |
Carbon | ≤0.20*A |
Manganese | 1.00-1.45 |
Vanadium plus Columnium | ≤0.12 |
Silicon | 0.15-0.40*B |
Vanadium | ≤0.10 |
Columbium | ≤0.04 |
Phosphorus | ≤0.030 |
Sulfur | ≤0.010 |
Pressure ratings (psig) | |||||
---|---|---|---|---|---|
WPHY 65 Fittings Temperature Ratings | Type Of Pressure Class | ||||
150 LBS | 300 LBS | ||||
1/4 - 1 Inches | 1 1/4 - 2 Inches | 2 1/2 - 3 Inches | |||
(oF) | (oC) | ||||
-20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
200 | 93 | 265 | 1785 | 1350 | 910 |
250 | 121 | 225 | 1575 | 1200 | 825 |
300 | 149 | 185 | 1360 | 1050 | 735 |
350 | 177 | 150 | 1150 | 900 | 650 |
400 | 204 | - | 935 | 750 | 560 |
450 | 232 | - | 725 | 600 | 475 |
500 | 260 | - | 510 | 450 | 385 |
550 | 288 | - | 300 | 300 | 300 |
NPS Of Pipe Cap | O.D. (Outside Daimeter) Of D |
Length Of (H) |
Length Of (H1) |
1/2 | 21.3 | 25 | 25 |
3/4 | 26.7 | 25 | 25 |
1 | 33.4 | 38 | 38 |
1.1/4 | 42.2 | 38 | 38 |
1.1/2 | 48.3 | 38 | 38 |
2 | 60.3 | 38 | 44 |
2.1/2 | 73 | 38 | 51 |
3 | 88.9 | 51 | 64 |
3.1/2 | 101.6 | 64 | 76 |
4 | 114.3 | 64 | 76 |
5 | 141.3 | 76 | 89 |
6 | 168.3 | 89 | 102 |
8 | 219.1 | 102 | 127 |
10 | 273 | 127 | 152 |
12 | 323.8 | 152 | 178 |
14 | 355.6 | 165 | 191 |
16 | 406.4 | 178 | 203 |
18 | 457 | 203 | 229 |
20 | 508 | 229 | 254 |
22 | 559 | 254 | 254 |
24 | 610 | 267 | 305 |
26 | 660 | 267 | … |
28 | 711 | 267 | … |
30 | 762 | 267 | … |
32 | 813 | 267 | … |
34 | 864 | 237 | … |
36 | 914 | 267 | … |
38 | 965 | 305 | … |
40 | 1016 | 305 | … |
42 | 1067 | 305 | … |
44 | 1118 | 343 | … |
46 | 1168 | 343 | … |
48 | 1219 | 343 | … |
Carbon Steel WPHY 65 Elbow
Grade WPHY 65 Tee
MSS SP 75 wphy 65 Reducer
ASME SA860 WPHY 65 End Cap
Wrought Pipe High Yield 65 Seamless Equal Tee
WPHY 65 Eccentric Reducer
SA860 WPHY 65 Reducing Cross
Wrought Pipe High Yield 65 Buttweld 90 Deg Bend
NPS Of Equal Tee | Outside Daimeter (O.D.) at bevel |
Center-to-End | |
---|---|---|---|
(C) Run | (M) Outlet | ||
1/2" | 21.3 | 25 | 25 |
3/4" | 26.7 | 29 | 29 |
1" | 33.4 | 38 | 38 |
1 1/4" | 42.2 | 48 | 48 |
1 1/2" | 48.3 | 57 | 57 |
2" | 60.3 | 64 | 64 |
2 1/2" | 73.0 | 76 | 76 |
3" | 88.9 | 86 | 86 |
3 1/2" | 101.6 | 95 | 95 |
4" | 114.3 | 105 | 105 |
5" | 141.3 | 124 | 124 |
6" | 168.3 | 143 | 143 |
8" | 219.1 | 178 | 178 |
10" | 273.0 | 216 | 216 |
12" | 323.8 | 254 | 254 |
14" | 355.6 | 279 | 279 |
16" | 406.4 | 305 | 305 |
18" | 457.0 | 343 | 343 |
20" | 508.0 | 381 | 381 |
22" | 559.0 | 419 | 419 |
24" | 610.0 | 432 | 432 |
+91-9987870874
info@fastwell.in
Shop No. 17/B1, Ground Floor Abbas Bldg. Wing A, Jalbhai Street, Near Cama Baug Khetwadi, Grant Road (E) Mumbai – 400004. India