ASTM A860 Grade 60 Buttweld Reducing Tee is made up of good quality alloy and is also known to be the best option for marine and seawater applications. This is because they offer high resistance to chloride stress cracking that might occur in marine environments. Due to the variety of sizes and dimensions that they are available in and the different applications that they are used in, these fittings are said to be versatile.
ASME SA860 WPHY 60 Seamless Long Stub End is also resistant to disintegration and is available in seamless, welded, and fabricated form. When oxygen is absorbed in these fittings a hard and brittle oxygen stabilized layer is formed on the fitting. This layer when heated in air is known as the alpha case. WPHY 60 Welded Fittings that are seamless are available in ½ inch to 24 inches in size. Whereas, the ones that are welded are available in the size range of ½ inch to 120 inches. We supply these fittings in different sizes and even customize them if required.
Fittings made up of WPHY standards are available in various grades. These grades are differentiated and have minute differences. One such fitting made up of grade 60 is the WPHY 60 Fittings. They provide sturdiness, with good durability and toughness. They have accurate dimensions and can be surface treated with transparent oil, anti corrosion black oil, or can also be hot dipped galvanized. According to MSS SP75 WPHY, 60 Elbow manufacturers In India Hot galvanization improves the resistance of these fittings towards corrosion. Hence most of the fittings under this grade are galvanized.
WPHY 60 Fittings : Carbon Steel WPHY 60 Fittings can be used in automobile, electrical, engineering and construction industries. They are also used in distilleries, sugar mills, petrochemical, pumps, and cement industries.
ASTM A234 WPB Fittings: ASTM A234 WPB Fittings that is used in moderate temperature and are made up of carbon and steel alloy.
Tensile Strength | |
---|---|
ksi | MPa |
75-100 | 515-690 |
Grade WPHY 60 Welded 45 Deg Bend
MSS SP75 WPHY 60 Stub End
SA860 WPHY 60 CS Cross
A860 WPHY GR 60 90 Deg Elbow
WPHY 60 Buttweld Elbow
A860 WPHY 60 Tee
WPHY 60 Carbon Steel Reducer
MSS SP75 WPHY 60 End Cap
NPS Of Equal Tee | Outside Daimeter (O.D.) at bevel | Center-to-End | |
---|---|---|---|
(C) Run | (M) Outlet | ||
1/2" | 21.3 | 25 | 25 |
3/4" | 26.7 | 29 | 29 |
1" | 33.4 | 38 | 38 |
1 1/4" | 42.2 | 48 | 48 |
1 1/2" | 48.3 | 57 | 57 |
2" | 60.3 | 64 | 64 |
2 1/2" | 73.0 | 76 | 76 |
3" | 88.9 | 86 | 86 |
3 1/2" | 101.6 | 95 | 95 |
4" | 114.3 | 105 | 105 |
5" | 141.3 | 124 | 124 |
6" | 168.3 | 143 | 143 |
8" | 219.1 | 178 | 178 |
10" | 273.0 | 216 | 216 |
12" | 323.8 | 254 | 254 |
14" | 355.6 | 279 | 279 |
16" | 406.4 | 305 | 305 |
18" | 457.0 | 343 | 343 |
20" | 508.0 | 381 | 381 |
22" | 559.0 | 419 | 419 |
24" | 610.0 | 432 | 432 |
ASTM A860 WPHY 60 Fittings Marking includes ANSI Or ASME/ ASA Code
For all Buttweld Pipe fittings | ASTM A860 WPHY 60 Fittings | |||
NPS Of End Cap | O.D. For (Outside Daimeter) Ø at Bevel | I.D. For (Inside Daimeter) Ø at End | Wall Thick. t / t1 | Overall Length (E) |
1/2 a 2 1/2 | 1 | 0,8 | Not | 4 |
3 a 3 1/2 | 1 | 1,6 | less | 4 |
4 | +2 -1 | 1,6 | than | 4 |
5 a 6 | +3 -1 | 1,6 | 87,50% | 7 |
8 | 2 | 1,6 | of nominal | 7 |
10 | +4 -3 | 3,2 | tickness | 7 |
12 a 18 | +4 -3 | 3,2 | 7 | |
20 a 24 | +6 -5 | 4,8 | 7 | |
26 a 30 | +7 -5 | 4,8 | 10 | |
32 a 48 | +7 -5 | 4,8 | 10 |
RCD Reiso Code | BIG Ø | SMALL Ø | Hight (H) MM | Theoretical Weight In KG (Kilogram) | ||||
---|---|---|---|---|---|---|---|---|
(DN) | (D) MM | Thickness Of (S) In MM. | (DN) | (D) MM | Thickness Of (S) MM | |||
27 21 | 3/4 | 26.9 | 2.3 | 1/2 | 21.3 | 2.0 | 38 | 0.08 |
33 21 | 1 | 33.7 | 2.6 | 1/2 | 21.3 | 2.0 | 50 | 0.09 |
33 27 | 3/4 | 26.9 | 2.3 | 0.09 | ||||
42 21 | 1"1/4 | 42.4 | 2.6 | 1/2 | 21.3 | 2.0 | 50 | 0.12 |
42 27 | 3/4 | 26.9 | 2.3 | 0.13 | ||||
42 33 | 1 | 33.7 | 2.6 | 0.14 | ||||
*48 21 | 1"1/2 | 48.3 | 2.6 | 1/2 | 21.3 | 2.0 | 64 | 0.18 |
48 27 | 3/4 | 26.9 | 2.3 | 0.19 | ||||
48 33 | 1 | 33.7 | 2.6 | 0.20 | ||||
48 42 | 1"1/4 | 42.4 | 2.6 | 0.20 | ||||
60 27 | 2 | 60.3 | 2.9 | 3/4 | 26.9 | 2.3 | 76 | 0.30 |
60 33 | 1 | 33.7 | 2.6 | 0.31 | ||||
60 42 | 1"1/4 | 42.4 | 2.6 | 0.32 | ||||
60 48 | 1"1/2 | 48.3 | 2.6 | 0.33 | ||||
76 33 | 2"1/2 | 76.1 | 2.9 | 1 | 33.7 | 2.6 | 90 | 0.40 |
76 42 | 1"1/4 | 42.4 | 2.6 | 0.47 | ||||
76 48 | 1"1/2 | 48.3 | 2.6 | 0.48 | ||||
76 60 | 2 | 60.3 | 2.6 | 0.49 | ||||
89 42 | 3 | 88.9 | 3.2 | 1"1/4 | 42.4 | 2.6 | 90 | 0.55 |
89 48 | 1"1/2 | 48.3 | 2.6 | 0.61 | ||||
89 60 | 2 | 60.3 | 2.9 | 0.62 | ||||
89 76 | 2"1/2 | 76.1 | 2.9 | 0.63 | ||||
114 48 | 4 | 114.3 | 3.6 | 1"1/2 | 48.3 | 2.6 | 100 | 0.85 |
114 60 | 2 | 60.3 | 2.9 | 0.98 | ||||
114 76 | 2"1/2 | 76.1 | 2.9 | 1.00 | ||||
114 89 | 3 | 88.9 | 3.2 | 1.02 | ||||
139 60 | 5 | 139.7 | 4.0 | 2 | 60.3 | 2.9 | 127 | 1.60 |
139 76 | 2"1/2 | 76.1 | 2.9 | 1.70 | ||||
139 89 | 3 | 88.9 | 3.2 | 1.74 | ||||
139 114 | 4 | 114.3 | 3.6 | 1.76 | ||||
*168 76 | 6 | 168.3 | 4.5 | 2"1/2 | 76.1 | 2.9 | 140 | 2.60 |
168 89 | 3 | 88.9 | 3.2 | 2.70 | ||||
168 114 | 4 | 114.3 | 3.6 | 2.82 | ||||
168 139 | 5 | 139.7 | 4.0 | 2.94 | ||||
219 114 | 8 | 219.1 | 6.3 | 4 | 114.3 | 3.6 | 152 | 5.03 |
219 139 | 5 | 139.7 | 4.0 | 5.12 | ||||
219 168 | 6 | 168.3 | 4.5 | 5.18 | ||||
*273 114 | 10 | 273.0 | 6.3 | 4 | 114.3 | 3.6 | 178 | 7.00 |
*273 139 | 5 | 139.7 | 4.0 | 7.20 | ||||
273 168 | 6 | 168.3 | 4.5 | 7.40 | ||||
273 219 | 8 | 219.1 | 6.3 | 7.55 | ||||
323 168 | 12 | 323.9 | 7.1 | 6 | 168.3 | 4.5 | 203 | 11.00 |
323 219 | 8 | 219.1 | 6.3 | 11.10 | ||||
323 273 | 10 | 273 | 6.3 | 11.20 |
Material Specification | ASTM A860 WPHY 60 Fittings |
---|---|
Dimension And Standard | MSS-SP-43 Type A/ JIS B2312/ ANSI B16.28/ IS B2313/ ASME B16.9/ MSS-SP-43 Type B |
Type Of Connection | Welding |
Famous Type Of WPHY 60 Buttweld Fittings | Stub End/ Pipe Bend/ End Cap/ Elbow/ Tee/ Reducer |
Maximum Pressure | Class 900 |
Wall Thickness: | SCH160, SCH20, SCH30, SCH80, SCH100 XS, SCH 5S, SCH40, SCH60, SCH120, SCH140. |
Application Types: | Chemical Industry Water Pipeline Industry Nuclear Power Plant Natural Gas Industry |
Equipment Of Making Fittings | Sand-blasting machine/ Bending machine/ Pushing Machine/ Press machine/ Electric bevelling machine etc |
Chemical Chart | Molybdenum (≤0.25*C), Silicon (0.15-0.40*B), Carbon (≤0.20*A), Manganese (1.00-1.45), Nickel (≤0.50*C), Phosphorus (≤0.030), Sulfur (≤0.010), Chromium (≤0.30*C). |
available Size | BW (1/2” TO 36” Inch) SMLS (1” TO 48” Inch) |
Elongation, minimum | |
---|---|
% | 20 |
WPHY 60 Fittings
Europe, Malaysia, UAE, United Kingdom -UK
MSS SP75 WPHY 60 Elbow
Philippines, Indonesia, Dammam -KSA
ASTM A860 Grade 60 Reducing Tee
France, Qatar, Thailand, Europe
Carbon Steel WPHY 60 Eccentric Reducer
USA, Germany, Bangladesh, Finland
ASME SA860 WPHY 60 Seamless Stub End
South Africa, Brazil, Saudi Arabia (KSA), Kuwait
WPHY 60 Welded Fittings
Nigeria, Egypt, UK, Turkey, Australia, Belgium
Carbon Steel WPHY 60 Fittings
Poland, Hong Kong, Spain, Mexico, Oman, Japan
CS A860 Wrought Pipe High Yield 60 Pipe Bend
Iran, Canada, Italy, Singapore, Chile, China
Normal Pipe Size For (NPS) For ANSI/ASME B16.9 | 10S Schedule | 40S Schedule | 80S Schedule | ||||||
Buttweld 90 Degree Elbow | Buttweld 45 Degree Elbow | B16.9 Buttweld Equal Tee | Buttweld 90 Deg Elbows | Buttweld 45 Deg Elbows | B16.9 Buttweld Equal Tee | Buttweld 90 Degree Elbow | Buttweld 45 Degree Elbow | ASME B16.9 Buttweld Equal Tee | |
8 | 0.02 | 0.01 | 0.03 | 0.03 | 0.02 | 0.06 | 0.04 | 0.03 | 0.07 |
10 | 0.03 | 0.02 | 0.05 | 0.03 | 0.02 | 0.03 | 0.06 | 0.04 | 0.09 |
15 | 0.06 | 0.03 | 0.09 | 0.08 | 0.04 | 0.10 | 0.10 | 0.05 | 0.14 |
20 | 0.07 | 0.03 | 0.13 | 0.08 | 0.04 | 0.17 | 0.11 | 0.05 | 0.20 |
25 | 0.14 | 0.08 | 0.28 | 0.15 | 0.11 | 0.29 | 0.22 | 0.14 | 0.38 |
32 | 0.23 | 0.11 | 0.49 | 0.26 | 0.17 | 0.59 | 0.40 | 0.23 | 0.68 |
40 | 0.30 | 0.17 | 0.68 | 0.40 | 0.23 | 0.86 | 0.51 | 0.29 | 1.02 |
50 | 0.50 | 0.25 | 0.85 | 0.70 | 0.4 | 1.28 | 0.91 | 0.59 | 1.59 |
65 | 0.85 | 0.48 | 1.41 | 1.40 | 0.77 | 2.19 | 1.81 | 0.99 | 3.13 |
80 | 1.25 | 0.63 | 1.77 | 2.20 | 1.08 | 3.31 | 2.97 | 1.50 | 4.45 |
90 | 1.70 | 0.75 | 2.67 | 2.83 | 1.42 | 4.08 | 4.00 | 2.00 | 5.44 |
100 | 2.10 | 1.08 | 3.46 | 4.47 | 2.09 | 5.27 | 6.18 | 2.81 | 7.71 |
150 | 5.45 | 2.72 | 8.07 | 10.89 | 5.44 | 10.99 | 16.32 | 8.16 | 13.61 |
200 | 10.20 | 5.33 | 15.65 | 21.54 | 10.77 | 20.91 | 33.11 | 16.56 | 28.12 |
250 | 18.15 | 9.75 | 26.46 | 38.56 | 19.27 | 35.38 | 51.71 | 25.86 | 49.90 |
300 | 25.80 | 13.62 | 39.46 | 59.42 | 29.71 | 62.14 | 79.38 | 39.69 | 83.91 |
Normal Pipe Size For (NPS) For ANSI/ ASME B16.9 | 10S Schedule | 40S Schedule | 80S Schedule | ||||||
Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | |
40x.25 | 0.19 | 0.19 | 0.60 | 0.26 | 0.26 | 0.76 | 0.34 | 0.34 | 0.90 |
50x25 | 0.28 | 0.28 | 0.73 | 0.40 | 0.40 | 1.10 | 0.54 | 0.54 | 1.37 |
50x40 | 0.31 | 0.31 | 0.76 | 0.45 | 0.45 | 1.15 | 0.59 | 0.59 | 1.43 |
80x.50 | 0.55 | 0.55 | 1.56 | 1.00 | 1.00 | 2.91 | 1.79 | 1.79 | 3.91 |
100x50 | 0.78 | 0.78 | 2.94 | 1.50 | 1.50 | 4.48 | 1.95 | 1.95 | 6.55 |
100x80 | 0.87 | 0.87 | 3.04 | 1.74 | 1.74 | 4.64 | 2.33 | 2.33 | 6.79 |
150x80 | 1.82 | 1.82 | 6.86 | 3.95 | 3.95 | 9.68 | 5.51 | 5.51 | 11.57 |
150x100 | 1.96 | 1.96 | 7.10 | 4.07 | 4.07 | 11.94 | 5.96 | 5.96 | 11.97 |
200x100 | 3.01 | 3.01 | 13.46 | 6.55 | 6.55 | 17.98 | 9.23 | 9.23 | 24.18 |
200x150 | 3.19 | 3.19 | 14.08 | 6.74 | 6.74 | 18.82 | 10.12 | 10.12 | 25.31 |
Type Of Fittings | Size | SCH | Material | Price In INR (India) Per Piece |
---|---|---|---|---|
ASTM A860 WPHY 60 Reducer | 3/4 X 1/2" | Sch 40 | - | 234.00 |
Concentric Reducer | 1 X 1/2" | Sch 40 | - | 300.00 |
Concentric Reducer | 1 X 3/4" | Sch 40 | - | 367.00 |
Concentric Reducer | 3 X 2" | Sch 40 | - | 563.00 |
ASTM A860 WPHY 60 Tee | 1/2" | Sch 40 | - | 100.00 |
Equal Tee | 3/4" | Sch 40 | - | 165.00 |
Equal Tee | 1" | Sch 40 | - | 245.00 |
Equal Tee | 1 1/4" | Sch 40 | - | 348.00 |
Equal Tee | 2" | Sch 40 | - | 457.00 |
90 Deg Elbow | 1/2" | Sch 40 | - | 158.00 |
90 Deg Elbow | 3/4" | Sch 40 | - | 336.00 |
90 Deg Elbow | 1" | Sch 40 | - | 426.00 |
90 Deg Elbow | 1 1/4" | Sch 40 | - | 536.00 |
90 Deg Elbow | 2" | Sch 40 | - | 658.00 |
90 Deg Elbow | 4" | Sch 40 | ASTM A860 WPHY 60 | 758.00 |
High-Quality Wphy 60 Fittings Manufacturer In India. For final ASTM A860 WPHY 60 Fittings Price List Please Call on +91-9987870874 or drop an Email to info@fastwell.in.
Normal Pipe Size For (NPS) | O.D. For (Outside Daimeter) of barrel | Length Of (F) | Radius Of(R) | Diameter Of (G) | ||
---|---|---|---|---|---|---|
(Min.) | (Max.) | ASME B16.9 Long Pattern | ASME B16.9 Short Pattern | |||
1/2″ | 20.5 | 22.8 | 76 | 51 | 3 | 35 |
3/4″ | 25.9 | 28.1 | 76 | 51 | 3 | 43 |
1″ | 32.6 | 35.0 | 102 | 51 | 3 | 51 |
1 1/4″ | 41.4 | 43.6 | 102 | 51 | 5 | 64 |
1 1/2″ | 47.5 | 49.9 | 102 | 51 | 6 | 74 |
2″ | 59.5 | 62.4 | 152 | 64 | 8 | 92 |
2 1/2″ | 72.2 | 75.3 | 152 | 64 | 8 | 105 |
3″ | 88.1 | 91.3 | 152 | 64 | 10 | 127 |
3 1/2″ | 100.8 | 104.0 | 152 | 76 | 10 | 140 |
4″ | 113.5 | 116.7 | 152 | 76 | 11 | 157 |
5″ | 140.5 | 144.3 | 203 | 76 | 11 | 186 |
6″ | 167.5 | 171.3 | 203 | 89 | 13 | 216 |
8″ | 218.3 | 222.1 | 203 | 102 | 13 | 270 |
10″ | 272.3 | 277.2 | 254 | 127 | 13 | 324 |
12″ | 323.1 | 328.0 | 254 | 152 | 13 | 381 |
14″ | 354.8 | 359.9 | 305 | 152 | 13 | 413 |
16″ | 405.6 | 411.0 | 305 | 152 | 13 | 470 |
18″ | 456.0 | 462.0 | 305 | 152 | 13 | 533 |
20″ | 507.0 | 514.0 | 305 | 152 | 13 | 584 |
22″ | 558.0 | 565.0 | 305 | 152 | 13 | 641 |
24″ | 609.0 | 616.0 | 305 | 152 | 13 | 692 |
ASTM A860/ 860M | Yield Strength, (minimum) | Tensile Strength | Elongation, (minimum) | Cv, avg./(minimum) | |||
---|---|---|---|---|---|---|---|
Grade | ksi | MPa | ksi | MPa | % | ft*lbs | J |
ASTM A860 WPHY 60 Fittings | 60 | 415 | 75-100 | 515-690 | 20 | 30/25 | 40/34 |
Standard Of Pipe | Specification | . Bauart 5 | 2,5D | |
---|---|---|---|---|
Size | Dia. [Outside Daimeter] | CLR | CLR | CLR |
20 | 26,9 | 110 | 67 | |
25 | 33,7 | 110 | 84 | |
32 | 42,4 | 110 | 106 | |
40 | 48,3 | 110 | 212 | |
50 | 60,3 | 125 | 151 | |
65 | 76,1 | 175 | 190 | |
80 | 88,9 | 205 | 222 | |
100 | 114,3 | 270 | 286 | |
125 | 139,7 | 330 | 350 | |
150 | 168,3 | 390 | 421 | |
200 | 219,1 | 510 | ||
250 | 273 | 650 | ||
300 | 323,9 | 775 | ||
350 | 355,6 | 850 | ||
400 | 406,4 | 970 | ||
500 | 508 | 1245 |
ASTM A860 WPHY 60 Fittings Chemical Composition | |
---|---|
Chromium | ≤0.30*C |
Carbon | ≤0.20*A |
Manganese | 1.00-1.45 |
Vanadium plus Columnium | ≤0.12 |
Aluminum | ≤0.06 |
Titanium | ≤0.05 |
Nickel | ≤0.50*C |
Molybdenum | ≤0.25*C |
Copper | ≤0.35*C |
Vanadium | ≤0.10 |
Columbium | ≤0.04 |
Phosphorus | ≤0.030 |
Sulfur | ≤0.010 |
Silicon | 0.15-0.40*B |
Pressure ratings (psig) | |||||
---|---|---|---|---|---|
WPHY 60 Fittings Temperature Ratings | Type Of Pressure Class | ||||
150 LBS | 300 LBS | ||||
1/4 - 1 Inches | 1 1/4 - 2 Inches | 2 1/2 - 3 Inches | |||
(oF) | (oC) | ||||
-20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
200 | 93 | 265 | 1785 | 1350 | 910 |
250 | 121 | 225 | 1575 | 1200 | 825 |
300 | 149 | 185 | 1360 | 1050 | 735 |
350 | 177 | 150 | 1150 | 900 | 650 |
400 | 204 | - | 935 | 750 | 560 |
450 | 232 | - | 725 | 600 | 475 |
500 | 260 | - | 510 | 450 | 385 |
550 | 288 | - | 300 | 300 | 300 |
Normal Size Of Pipe | Outside Dai Of (D) | 90 degree (Long Radius) Center-to-End (A) | 45 degree (Long Radius) Center-to-End (B) | 90 degree (3D) Center-to-End (A) | 45 degree (3D) Center-to-End (B) |
1/2 | 21.3 | 38 | 16 | – | – |
3/4 | 26.7 | 38 | 19 | 57 | 24 |
1 | 33.4 | 38 | 22 | 76 | 31 |
1¼ | 42.2 | 48 | 25 | 95 | 39 |
1½ | 48.3 | 57 | 29 | 114 | 47 |
2 | 60.3 | 76 | 35 | 152 | 63 |
2½ | 73 | 95 | 44 | 190 | 79 |
3 | 88.9 | 114 | 51 | 229 | 95 |
3½ | 101.6 | 133 | 57 | 267 | 111 |
4 | 114.3 | 152 | 64 | 305 | 127 |
5 | 141.3 | 190 | 79 | 381 | 157 |
6 | 168.3 | 229 | 95 | 457 | 189 |
8 | 219.1 | 305 | 127 | 610 | 252 |
10 | 273 | 381 | 159 | 762 | 316 |
12 | 323.8 | 457 | 190 | 914 | 378 |
14 | 355.6 | 533 | 222 | 1067 | 441 |
16 | 406.4 | 610 | 254 | 1219 | 505 |
18 | 457 | 686 | 286 | 1372 | 568 |
20 | 508 | 762 | 318 | 1524 | 632 |
22 | 559 | 838 | 343 | 1676 | 694 |
24 | 610 | 914 | 381 | 1829 | 757 |
26 | 660 | 991 | 406 | 1981 | 821 |
28 | 711 | 1067 | 438 | 2134 | 883 |
30 | 762 | 1143 | 470 | 2286 | 964 |
32 | 813 | 1219 | 502 | 2438 | 1010 |
34 | 864 | 1295 | 533 | 2591 | 1073 |
36 | 914 | 1372 | 565 | 2743 | 1135 |
38 | 965 | 1448 | 600 | 2896 | 1200 |
40 | 1016 | 1524 | 632 | 3048 | 1264 |
42 | 1067 | 1600 | 660 | 3200 | 1326 |
44 | 1118 | 1676 | 695 | 3353 | 1389 |
46 | 1168 | 1753 | 727 | 3505 | 1453 |
48 | 1219 | 1829 | 759 | 3658 | 1516 |
Yield Strength, minimum | |
---|---|
ksi | MPa |
60 | 415 |
O.D. (Outside Daimeter) And I.D. (Inside Daimeter) | Equivalent List | Diameter Of Nominal Pipe | Threads Size In Inches |
5/16 | 0.313 | 1/16 | 27 |
13/32 | 0.405 | 1/8 | 27 |
35/64 | 0.540 | 1/4 | 18 |
43/64 | 0.675 | 3/8 | 18 |
27/32 | 0.840 | 1/2 | 14 |
1-3/64 | 1.050 | 3/4 | 14 |
1-5/16 | 1.315 | 1 | 11-1/2 |
1-21/32 | 1.660 | 1-1/4 | 11-1/2 |
1-29/32 | 1.900 | 1-1/2 | 11-1/2 |
2-3/8 | 2.375 | 2 | 11-1/2 |
2-7/8 | 2.875 | 2-1/2 | 8 |
3-1/2 | 3.500 | 3 | 8 |
4 | 4.000 | 3-1/2 | 8 |
4-1/2 | 4.500 | 4 | 8 |
NPS Of Pipe Cap | O.D. (Outside Daimeter) Of D | Length Of (H) | Length Of (H1) |
1/2 | 21.3 | 25 | 25 |
3/4 | 26.7 | 25 | 25 |
1 | 33.4 | 38 | 38 |
1.1/4 | 42.2 | 38 | 38 |
1.1/2 | 48.3 | 38 | 38 |
2 | 60.3 | 38 | 44 |
2.1/2 | 73 | 38 | 51 |
3 | 88.9 | 51 | 64 |
3.1/2 | 101.6 | 64 | 76 |
4 | 114.3 | 64 | 76 |
5 | 141.3 | 76 | 89 |
6 | 168.3 | 89 | 102 |
8 | 219.1 | 102 | 127 |
10 | 273 | 127 | 152 |
12 | 323.8 | 152 | 178 |
14 | 355.6 | 165 | 191 |
16 | 406.4 | 178 | 203 |
18 | 457 | 203 | 229 |
20 | 508 | 229 | 254 |
22 | 559 | 254 | 254 |
24 | 610 | 267 | 305 |
26 | 660 | 267 | … |
28 | 711 | 267 | … |
30 | 762 | 267 | … |
32 | 813 | 267 | … |
34 | 864 | 237 | … |
36 | 914 | 267 | … |
38 | 965 | 305 | … |
40 | 1016 | 305 | … |
42 | 1067 | 305 | … |
44 | 1118 | 343 | … |
46 | 1168 | 343 | … |
48 | 1219 | 343 | … |
+91-9987870874
info@fastwell.in
Shop No. 17/B1, Ground Floor Abbas Bldg. Wing A, Jalbhai Street, Near Cama Baug Khetwadi, Grant Road (E) Mumbai – 400004. India