Titanium fittings are used in various applications. These fittings are divided into different grades. Grade 2 and grade 5. Titanium Grade 2 Pipe Fittings offer high tensile strength and a good load bearing facility. According to Titanium Gr 2 Elbow manufacturer In India, they offer excellent weldability and versatility. It is used in applications that are prone to corrosion as they resist corrosion. Grade 2 Ti Buttweld Fittings offer good electrical conductivity and ductility. These fittings are used in aerospace engineering and surgical implants. It has a melting point of 1665 degrees C.
UNS R50400 Reducing Tee is used in the air frame structure, chemical industry, marine industry, desalination, and medical industry. They are also used in high performing automotive parts and chlorate manufacturing. ASTM B381 Titanium Gr 2 Stub End can withstand high temperatures and can be used in boilers, heaters, and superheaters. Since they are forged from a single piece of heated material these fittings are strong. Titanium R50400 End Cap is made up of high quality raw material and is resistant to corrosion as well as abrasion. These pipe fittings also change the rate of flow along with changing the direction if required.
These Titanium 3.7035 Pipe Reducer also offer resistance properties in aqueous media. They are used in reaction vessels, oil and gas components, tubing and piping system heat exchangers, flue gas, and liners. ASME B381 Ti Gr 2 Welded Fittings are however less scratch resistant when compared to stainless steel. We manufacture these ASTM Titanium Grade 2 Pipe Bend as per international standards. Our products can be customized if required. Ti R50400 BW Pipe Fittings are therefore passed through various tests before supplying them to our customers to confirm the mechanical as well as chemical properties inherited by them.
Table Of Content:
Titanium Grade 2 Chemical Composition
| Titanium Grade 2 Pipe Fittings | (w.t %:) (≤0.10), Fe (≤0.30), (Ti): balance, (H) ≤0.0125, N (≤0.05), O≤0.25, (Residuals): (each) ≤0.10, (total) ≤0.40. |
|---|
Titanium Grade 2 Mechanical Properties
| Titanium And Ti Alloy | Tensile Strength, (minimum) | Yield Strength, (minimum) | Hardness | Elongation | ||
|---|---|---|---|---|---|---|
| Titanium Grade | ksi | MPa | ksi | MPa | - | min. % |
| Titanium Grade 2 Pipe Fittings | 50 | 345 | 40 | 275 | 160–180 HV | 20 |
ANSI/ ASME B16.9 Titanium Grade 2 High Temperature Reducer Dimensions
| RCD Reiso Code | BIG Ø | SMALL Ø | Hight (H) MM | Theoretical Weight In KG (Kilogram) | ||||
|---|---|---|---|---|---|---|---|---|
| (DN) | (D) MM | Thickness Of (S) In MM. | (DN) | (D) MM | Thickness Of (S) MM | |||
| 27 21 | 3/4 | 26.9 | 2.3 | 1/2 | 21.3 | 2.0 | 38 | 0.08 |
| 33 21 | 1 | 33.7 | 2.6 | 1/2 | 21.3 | 2.0 | 50 | 0.09 |
| 33 27 | 3/4 | 26.9 | 2.3 | 0.09 | ||||
| 42 21 | 1"1/4 | 42.4 | 2.6 | 1/2 | 21.3 | 2.0 | 50 | 0.12 |
| 42 27 | 3/4 | 26.9 | 2.3 | 0.13 | ||||
| 42 33 | 1 | 33.7 | 2.6 | 0.14 | ||||
| *48 21 | 1"1/2 | 48.3 | 2.6 | 1/2 | 21.3 | 2.0 | 64 | 0.18 |
| 48 27 | 3/4 | 26.9 | 2.3 | 0.19 | ||||
| 48 33 | 1 | 33.7 | 2.6 | 0.20 | ||||
| 48 42 | 1"1/4 | 42.4 | 2.6 | 0.20 | ||||
| 60 27 | 2 | 60.3 | 2.9 | 3/4 | 26.9 | 2.3 | 76 | 0.30 |
| 60 33 | 1 | 33.7 | 2.6 | 0.31 | ||||
| 60 42 | 1"1/4 | 42.4 | 2.6 | 0.32 | ||||
| 60 48 | 1"1/2 | 48.3 | 2.6 | 0.33 | ||||
| 76 33 | 2"1/2 | 76.1 | 2.9 | 1 | 33.7 | 2.6 | 90 | 0.40 |
| 76 42 | 1"1/4 | 42.4 | 2.6 | 0.47 | ||||
| 76 48 | 1"1/2 | 48.3 | 2.6 | 0.48 | ||||
| 76 60 | 2 | 60.3 | 2.6 | 0.49 | ||||
| 89 42 | 3 | 88.9 | 3.2 | 1"1/4 | 42.4 | 2.6 | 90 | 0.55 |
| 89 48 | 1"1/2 | 48.3 | 2.6 | 0.61 | ||||
| 89 60 | 2 | 60.3 | 2.9 | 0.62 | ||||
| 89 76 | 2"1/2 | 76.1 | 2.9 | 0.63 | ||||
| 114 48 | 4 | 114.3 | 3.6 | 1"1/2 | 48.3 | 2.6 | 100 | 0.85 |
| 114 60 | 2 | 60.3 | 2.9 | 0.98 | ||||
| 114 76 | 2"1/2 | 76.1 | 2.9 | 1.00 | ||||
| 114 89 | 3 | 88.9 | 3.2 | 1.02 | ||||
| 139 60 | 5 | 139.7 | 4.0 | 2 | 60.3 | 2.9 | 127 | 1.60 |
| 139 76 | 2"1/2 | 76.1 | 2.9 | 1.70 | ||||
| 139 89 | 3 | 88.9 | 3.2 | 1.74 | ||||
| 139 114 | 4 | 114.3 | 3.6 | 1.76 | ||||
| *168 76 | 6 | 168.3 | 4.5 | 2"1/2 | 76.1 | 2.9 | 140 | 2.60 |
| 168 89 | 3 | 88.9 | 3.2 | 2.70 | ||||
| 168 114 | 4 | 114.3 | 3.6 | 2.82 | ||||
| 168 139 | 5 | 139.7 | 4.0 | 2.94 | ||||
| 219 114 | 8 | 219.1 | 6.3 | 4 | 114.3 | 3.6 | 152 | 5.03 |
| 219 139 | 5 | 139.7 | 4.0 | 5.12 | ||||
| 219 168 | 6 | 168.3 | 4.5 | 5.18 | ||||
| *273 114 | 10 | 273.0 | 6.3 | 4 | 114.3 | 3.6 | 178 | 7.00 |
| *273 139 | 5 | 139.7 | 4.0 | 7.20 | ||||
| 273 168 | 6 | 168.3 | 4.5 | 7.40 | ||||
| 273 219 | 8 | 219.1 | 6.3 | 7.55 | ||||
| 323 168 | 12 | 323.9 | 7.1 | 6 | 168.3 | 4.5 | 203 | 11.00 |
| 323 219 | 8 | 219.1 | 6.3 | 11.10 | ||||
| 323 273 | 10 | 273 | 6.3 | 11.20 | ||||
Titanium Grade 2 Pipe Fittings Elongation
| Elongation | 20 % |
|---|
Titanium Grade 2 Hardness Rockwell
| Hardness | 160–180 HV |
|---|
Titanium Gr 2 Buttweld Fittings Proof Stress
| Proof Stress | ||
|---|---|---|
| Grade | ksi | 275 |
| Titanium Grade 2 Pipe Fittings | 55 | 380 |
Schedule 80 Titanium Grade 2 Forged Fittings Tolerance Chart
| Tolerance Of Titanium Grade 2 Pipe Fittings | |||||||
| All Type Of Buttweld Fittings | 45 deg & 90 deg elbows | 180 Degree Returns | |||||
| Normal Size Of Pipe (NPS) | Outside Daimeter (O.D.) at Bevel | I.D. (Inside Daimeter) at End | Thickness Of Wall (WT) t / t1 | Center to End Daimeter A-B-C-M | Center to Center Daimeter (O) | Back to Face Daimeter (K) | Align- ment of Ends (U) |
| 1/2 a 2 1/2 | 1 | 0,8 | Not | 2 | 7 | 7 | 1 |
| 3 a 3 1/2 | 1 | 1,6 | less | 2 | 7 | 7 | 1 |
| 4 | +2 -1 | 1,6 | than | 2 | 7 | 7 | 1 |
| 5 a 6 | +3 -1 | 1,6 | 87,50% | 2 | 7 | 7 | 1 |
| 8 | 2 | 1,6 | of nominal | 2 | 7 | 7 | 1 |
| 10 | +4 -3 | 3,2 | tickness | 2 | 7 | 7 | 2 |
| 12 a 18 | +4 -3 | 3,2 | 3 | 10 | 7 | 2 | |
| 20 a 24 | +6 -5 | 4,8 | 3 | 10 | 7 | 2 | |
| 26 a 30 | +7 -5 | 4,8 | 3 | - | - | - | - |
| 32 a 48 | +7 -5 | 4,8 | 5 | - | - | - | - |
ANSI B16.9 Class 150 Titanium Gr 2 High Pressure Pipe Fittings Dimensions
| Normal Pipe Size For (NPS) | Outside Daimeter For (O.D.) | Buttweld 90 Deg Elbow | Buttweld 45 Deg Elbow | Buttweld Return 180 Deg Elbow | ||||
|---|---|---|---|---|---|---|---|---|
| (In Inches) | Buttweld LR Elbow | Buttweld SR Elbow | Buttweld LR Elbow | Buttweld LR Elbow | ||||
| (MM/ millimeter) | (Inches/ inch.) | Center to Face (In Inch) | Center to Face (In Inch) | Center to Face (In Inch) | Radius (In Inch) | Center to Center (In Inch) | Back to face (In Inch) | |
| 1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
| 3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
| 1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
| 1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
| 2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
| 2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
| 3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
| 3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
| 4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
| 5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
| 6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
| 8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
| 10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
| 12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
| Normal Pipe Size For (NPS) | Outside Daimeter For (O.D.) | ASME/ANSI B16.9 BW End Cap | ASME/ANSI B16.9 BW Straight Tee | ASME/ANSI B16.9 BW Straight Cross | ASME B16.9 BW Stub Ends | |||
|---|---|---|---|---|---|---|---|---|
| (Inches/ inch.) | (MM/ millimeter) | (Inch.) | Length (Inch.) | Center to End (Inch.) | Center to End (Inch.) | Lap Diameter (Inch.) | Long Length (Inch.) | Short Length (Inch.) |
| 1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
| 3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
| 1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
| 1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
| 2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
| 2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
| 3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
| 3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
| 4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
| 5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
| 6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
| 8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
| 10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
| 12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
UNS R50400 End Cap Dimensions
| NPS Of Pipe Cap | O.D. (Outside Daimeter) Of D | Length Of (H) | Length Of (H1) |
| 1/2 | 21.3 | 25 | 25 |
| 3/4 | 26.7 | 25 | 25 |
| 1 | 33.4 | 38 | 38 |
| 1.1/4 | 42.2 | 38 | 38 |
| 1.1/2 | 48.3 | 38 | 38 |
| 2 | 60.3 | 38 | 44 |
| 2.1/2 | 73 | 38 | 51 |
| 3 | 88.9 | 51 | 64 |
| 3.1/2 | 101.6 | 64 | 76 |
| 4 | 114.3 | 64 | 76 |
| 5 | 141.3 | 76 | 89 |
| 6 | 168.3 | 89 | 102 |
| 8 | 219.1 | 102 | 127 |
| 10 | 273 | 127 | 152 |
| 12 | 323.8 | 152 | 178 |
| 14 | 355.6 | 165 | 191 |
| 16 | 406.4 | 178 | 203 |
| 18 | 457 | 203 | 229 |
| 20 | 508 | 229 | 254 |
| 22 | 559 | 254 | 254 |
| 24 | 610 | 267 | 305 |
| 26 | 660 | 267 | … |
| 28 | 711 | 267 | … |
| 30 | 762 | 267 | … |
| 32 | 813 | 267 | … |
| 34 | 864 | 237 | … |
| 36 | 914 | 267 | … |
| 38 | 965 | 305 | … |
| 40 | 1016 | 305 | … |
| 42 | 1067 | 305 | … |
| 44 | 1118 | 343 | … |
| 46 | 1168 | 343 | … |
| 48 | 1219 | 343 | … |
Titanium Grade 2 Yield Strength
| Yield Strength, min. | ||
|---|---|---|
| Grade | Ksi | MPa |
| Titanium Grade 2 Pipe Fittings | 40 | 275 |
Types Of Titanium Grade 2 Pipe Fittings
Titanium Gr 2 Elbow
Titanium Grade 2 Reducing Tee
Gr 2 Titanium Stub End
Titanium Gr 2 Reducer
UNS R50400 End Cap
Titanum Alloy Gr 2 Pipe Bend
ASTM SB363 Ti. Alloy Gr 2 90 Degree Elbow
Ti Gr 2 Weldolet
Grade 2 Ti. Alloy Pipe Corss
ASME Sb363 Titanium Gr 2 Tee Dimension
| NPS Of Equal Tee | Outside Daimeter (O.D.) at bevel | Center-to-End | |
|---|---|---|---|
| (C) Run | (M) Outlet | ||
| 1/2" | 21.3 | 25 | 25 |
| 3/4" | 26.7 | 29 | 29 |
| 1" | 33.4 | 38 | 38 |
| 1 1/4" | 42.2 | 48 | 48 |
| 1 1/2" | 48.3 | 57 | 57 |
| 2" | 60.3 | 64 | 64 |
| 2 1/2" | 73.0 | 76 | 76 |
| 3" | 88.9 | 86 | 86 |
| 3 1/2" | 101.6 | 95 | 95 |
| 4" | 114.3 | 105 | 105 |
| 5" | 141.3 | 124 | 124 |
| 6" | 168.3 | 143 | 143 |
| 8" | 219.1 | 178 | 178 |
| 10" | 273.0 | 216 | 216 |
| 12" | 323.8 | 254 | 254 |
| 14" | 355.6 | 279 | 279 |
| 16" | 406.4 | 305 | 305 |
| 18" | 457.0 | 343 | 343 |
| 20" | 508.0 | 381 | 381 |
| 22" | 559.0 | 419 | 419 |
| 24" | 610.0 | 432 | 432 |
Grade 2 Ti. Stub Ends Dimensions
| Normal Pipe Size For (NPS) | O.D. For (Outside Daimeter) of barrel | Length Of (F) | Radius Of(R) | Diameter Of (G) | ||
|---|---|---|---|---|---|---|
| (Min.) | (Max.) | ASME B16.9 Long Pattern | ASME B16.9 Short Pattern | |||
| 1/2″ | 20.5 | 22.8 | 76 | 51 | 3 | 35 |
| 3/4″ | 25.9 | 28.1 | 76 | 51 | 3 | 43 |
| 1″ | 32.6 | 35.0 | 102 | 51 | 3 | 51 |
| 1 1/4″ | 41.4 | 43.6 | 102 | 51 | 5 | 64 |
| 1 1/2″ | 47.5 | 49.9 | 102 | 51 | 6 | 74 |
| 2″ | 59.5 | 62.4 | 152 | 64 | 8 | 92 |
| 2 1/2″ | 72.2 | 75.3 | 152 | 64 | 8 | 105 |
| 3″ | 88.1 | 91.3 | 152 | 64 | 10 | 127 |
| 3 1/2″ | 100.8 | 104.0 | 152 | 76 | 10 | 140 |
| 4″ | 113.5 | 116.7 | 152 | 76 | 11 | 157 |
| 5″ | 140.5 | 144.3 | 203 | 76 | 11 | 186 |
| 6″ | 167.5 | 171.3 | 203 | 89 | 13 | 216 |
| 8″ | 218.3 | 222.1 | 203 | 102 | 13 | 270 |
| 10″ | 272.3 | 277.2 | 254 | 127 | 13 | 324 |
| 12″ | 323.1 | 328.0 | 254 | 152 | 13 | 381 |
| 14″ | 354.8 | 359.9 | 305 | 152 | 13 | 413 |
| 16″ | 405.6 | 411.0 | 305 | 152 | 13 | 470 |
| 18″ | 456.0 | 462.0 | 305 | 152 | 13 | 533 |
| 20″ | 507.0 | 514.0 | 305 | 152 | 13 | 584 |
| 22″ | 558.0 | 565.0 | 305 | 152 | 13 | 641 |
| 24″ | 609.0 | 616.0 | 305 | 152 | 13 | 692 |
Size Chart Of MSS SP-75 Titanium Gr 2 Seamless Pipe Fittings
| O.D. (Outside Daimeter) And I.D. (Inside Daimeter) | Equivalent List | Diameter Of Nominal Pipe | Threads Size In Inches |
| 5/16 | 0.313 | 1/16 | 27 |
| 13/32 | 0.405 | 1/8 | 27 |
| 35/64 | 0.540 | 1/4 | 18 |
| 43/64 | 0.675 | 3/8 | 18 |
| 27/32 | 0.840 | 1/2 | 14 |
| 1-3/64 | 1.050 | 3/4 | 14 |
| 1-5/16 | 1.315 | 1 | 11-1/2 |
1-21/32 | 1.660 | 1-1/4 | 11-1/2 |
| 1-29/32 | 1.900 | 1-1/2 | 11-1/2 |
| 2-3/8 | 2.375 | 2 | 11-1/2 |
| 2-7/8 | 2.875 | 2-1/2 | 8 |
| 3-1/2 | 3.500 | 3 | 8 |
| 4 | 4.000 | 3-1/2 | 8 |
| 4-1/2 | 4.500 | 4 | 8 |
Application Of Ti Gr-2 Pipe Fittings
Alloy Grade 2 Elbow Dimensions
| Normal Size Of Pipe | Outside Dai Of (D) | 90 degree (Long Radius) Center-to-End (A) | 45 degree (Long Radius) Center-to-End (B) | 90 degree (3D) Center-to-End (A) | 45 degree (3D) Center-to-End (B) |
| 1/2 | 21.3 | 38 | 16 | – | – |
| 3/4 | 26.7 | 38 | 19 | 57 | 24 |
| 1 | 33.4 | 38 | 22 | 76 | 31 |
| 1¼ | 42.2 | 48 | 25 | 95 | 39 |
| 1½ | 48.3 | 57 | 29 | 114 | 47 |
| 2 | 60.3 | 76 | 35 | 152 | 63 |
| 2½ | 73 | 95 | 44 | 190 | 79 |
| 3 | 88.9 | 114 | 51 | 229 | 95 |
| 3½ | 101.6 | 133 | 57 | 267 | 111 |
| 4 | 114.3 | 152 | 64 | 305 | 127 |
| 5 | 141.3 | 190 | 79 | 381 | 157 |
| 6 | 168.3 | 229 | 95 | 457 | 189 |
| 8 | 219.1 | 305 | 127 | 610 | 252 |
| 10 | 273 | 381 | 159 | 762 | 316 |
| 12 | 323.8 | 457 | 190 | 914 | 378 |
| 14 | 355.6 | 533 | 222 | 1067 | 441 |
| 16 | 406.4 | 610 | 254 | 1219 | 505 |
| 18 | 457 | 686 | 286 | 1372 | 568 |
| 20 | 508 | 762 | 318 | 1524 | 632 |
| 22 | 559 | 838 | 343 | 1676 | 694 |
| 24 | 610 | 914 | 381 | 1829 | 757 |
| 26 | 660 | 991 | 406 | 1981 | 821 |
| 28 | 711 | 1067 | 438 | 2134 | 883 |
| 30 | 762 | 1143 | 470 | 2286 | 964 |
| 32 | 813 | 1219 | 502 | 2438 | 1010 |
| 34 | 864 | 1295 | 533 | 2591 | 1073 |
| 36 | 914 | 1372 | 565 | 2743 | 1135 |
| 38 | 965 | 1448 | 600 | 2896 | 1200 |
| 40 | 1016 | 1524 | 632 | 3048 | 1264 |
| 42 | 1067 | 1600 | 660 | 3200 | 1326 |
| 44 | 1118 | 1676 | 695 | 3353 | 1389 |
| 46 | 1168 | 1753 | 727 | 3505 | 1453 |
| 48 | 1219 | 1829 | 759 | 3658 | 1516 |
ASTM B338 Gr.2 Welded Fittings Weight In KG
|
Normal Pipe Size For (NPS) For ANSI/ASME B16.9 |
10S Schedule |
40S Schedule |
80S Schedule | ||||||
|
Buttweld 90 Degree Elbow | Buttweld 45 Degree Elbow | B16.9 Buttweld Equal Tee |
Buttweld 90 Deg Elbows | Buttweld 45 Deg Elbows |
B16.9 Buttweld Equal Tee | Buttweld 90 Degree Elbow | Buttweld 45 Degree Elbow |
ASME B16.9 Buttweld Equal Tee | |
|
8 |
0.02 |
0.01 |
0.03 |
0.03 |
0.02 |
0.06 |
0.04 |
0.03 |
0.07 |
|
10 |
0.03 |
0.02 |
0.05 |
0.03 |
0.02 |
0.03 |
0.06 |
0.04 |
0.09 |
|
15 |
0.06 |
0.03 |
0.09 |
0.08 |
0.04 |
0.10 |
0.10 |
0.05 |
0.14 |
|
20 |
0.07 |
0.03 |
0.13 |
0.08 |
0.04 |
0.17 |
0.11 |
0.05 |
0.20 |
|
25 |
0.14 |
0.08 |
0.28 |
0.15 |
0.11 |
0.29 |
0.22 |
0.14 |
0.38 |
|
32 |
0.23 |
0.11 |
0.49 |
0.26 |
0.17 |
0.59 |
0.40 |
0.23 |
0.68 |
|
40 |
0.30 |
0.17 |
0.68 |
0.40 |
0.23 |
0.86 |
0.51 |
0.29 |
1.02 |
|
50 |
0.50 |
0.25 |
0.85 |
0.70 |
0.4 |
1.28 |
0.91 |
0.59 |
1.59 |
|
65 |
0.85 |
0.48 |
1.41 |
1.40 |
0.77 |
2.19 |
1.81 |
0.99 |
3.13 |
|
80 |
1.25 |
0.63 |
1.77 |
2.20 |
1.08 |
3.31 |
2.97 |
1.50 |
4.45 |
|
90 |
1.70 |
0.75 |
2.67 |
2.83 |
1.42 |
4.08 |
4.00 |
2.00 |
5.44 |
|
100 |
2.10 |
1.08 |
3.46 |
4.47 |
2.09 |
5.27 |
6.18 |
2.81 |
7.71 |
|
150 |
5.45 |
2.72 |
8.07 |
10.89 |
5.44 |
10.99 |
16.32 |
8.16 |
13.61 |
|
200 |
10.20 |
5.33 |
15.65 |
21.54 |
10.77 |
20.91 |
33.11 |
16.56 |
28.12 |
|
250 |
18.15 |
9.75 |
26.46 |
38.56 |
19.27 |
35.38 |
51.71 |
25.86 |
49.90 |
|
300 |
25.80 |
13.62 |
39.46 |
59.42 |
29.71 |
62.14 |
79.38 |
39.69 |
83.91 |
|
Normal Pipe Size For (NPS) For ANSI/ ASME B16.9 |
10S Schedule |
40S Schedule |
80S Schedule | ||||||
| Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | Buttweld Con Pipe Reducer | Buttweld Ecc Pipe Reducer | Buttweld Unequal And Reducing Tee | |
|
40x.25 |
0.19 |
0.19 |
0.60 |
0.26 |
0.26 |
0.76 |
0.34 |
0.34 |
0.90 |
|
50x25 |
0.28 |
0.28 |
0.73 |
0.40 |
0.40 |
1.10 |
0.54 |
0.54 |
1.37 |
|
50x40 |
0.31 |
0.31 |
0.76 |
0.45 |
0.45 |
1.15 |
0.59 |
0.59 |
1.43 |
|
80x.50 |
0.55 |
0.55 |
1.56 |
1.00 |
1.00 |
2.91 |
1.79 |
1.79 |
3.91 |
|
100x50 |
0.78 |
0.78 |
2.94 |
1.50 |
1.50 |
4.48 |
1.95 |
1.95 |
6.55 |
|
100x80 |
0.87 |
0.87 |
3.04 |
1.74 |
1.74 |
4.64 |
2.33 |
2.33 |
6.79 |
|
150x80 |
1.82 |
1.82 |
6.86 |
3.95 |
3.95 |
9.68 |
5.51 |
5.51 |
11.57 |
|
150x100 |
1.96 |
1.96 |
7.10 |
4.07 |
4.07 |
11.94 |
5.96 |
5.96 |
11.97 |
|
200x100 |
3.01 |
3.01 |
13.46 |
6.55 |
6.55 |
17.98 |
9.23 |
9.23 |
24.18 |
|
200x150 |
3.19 |
3.19 |
14.08 |
6.74 |
6.74 |
18.82 |
10.12 |
10.12 |
25.31 |
DIN EN 10253 Titanium Alloy Gr 2 Pipe Fittings Pressure Class
| Pressure ratings (psig) | |||||
|---|---|---|---|---|---|
| Pipe Fittings Temperature Ratings | Type Of Pressure Class | ||||
| 150 LBS | 300 LBS | ||||
| 1/4 - 1 Inches | 1 1/4 - 2 Inches | 2 1/2 - 3 Inches | |||
| (oF) | (oC) | ||||
| -20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
| 200 | 93 | 265 | 1785 | 1350 | 910 |
| 250 | 121 | 225 | 1575 | 1200 | 825 |
| 300 | 149 | 185 | 1360 | 1050 | 735 |
| 350 | 177 | 150 | 1150 | 900 | 650 |
| 400 | 204 | - | 935 | 750 | 560 |
| 450 | 232 | - | 725 | 600 | 475 |
| 500 | 260 | - | 510 | 450 | 385 |
| 550 | 288 | - | 300 | 300 | 300 |
Titanium Grade 2 Tensile Strength
| Tensile Strength, min. | ||
|---|---|---|
| Grade | ksi | MPa |
| Titanium Grade 2 Pipe Fittings | 40 | 275 |
Titanium Grade 2 Fittings Price List
| Type Of Fittings | Size | SCH | Material | Price In INR (India) Per Piece |
|---|---|---|---|---|
| Titanium Gr 2 Reducer | 3/4 X 1/2 | SCH 160 | - | 300.00 |
| Concentric Reducer | 1 X 1/2" | SCH 160 | - | 432.00 |
| Concentric Reducer | 4 X 2" | SCH 160 | - | 763.00 |
| Concentric Reducer | 5 X 4" | SCH 40 | - | 1253.00 |
| Concentric Reducer | 6 X 4" | SCH 80 | - | 1465.00 |
| Titanium Gr 2 Elbow | 3/4" | SCH 40 | - | 342.00 |
| Titanium Gr 2 90 Deg Elbow | 1" | SCH 40 | - | 487.00 |
| Titanium Gr 2 90 Deg Elbow | 2" | SCH 40 | - | 678.00 |
| Titanium Gr 2 90 Deg Elbow | 3" | SCH 40 | - | 898.00 |
| Titanium Gr 2 90 Deg Elbow | 4" | SCH 40 | - | 1126.00 |
| Titanium Gr 2 90 Deg Elbow | 5" | SCH 40 | - | 1365.00 |
| Titanium Gr 2 90 Deg Elbow | 6" | SCH 40 | - | 1587.00 |
| Titanium Gr 2 End Cap | 1/2" | Schedule 40 | - | 342.00 |
| Titanium Gr 2 End Cap | 3/4" | Schedule 40 | - | 465.00 |
| Titanium Gr 2 End Cap | 1" | Schedule 40 | - | 698.00 |
| Titanium Gr 2 End Cap | 1 1/4" | Schedule 40 | - | 986.00 |
| Titanium Gr 2 End Cap | 2" | Schedule 40 | - | 1253.00 |
| Titanium Gr 2 Tee | 1/2" | Schedule 40 | - | 253.00 |
| Titanium Gr 2 Equal Tee | 3/4" | Schedule 40 | - | 346.00 |
| Titanium Gr 2 Equal Tee | 3/1" | Schedule 40 | - | 543.00 |
| Titanium Gr 2 Equal Tee | 2" | Schedule 40 | - | 732.00 |
| Titanium Gr 2 Equal Tee | 3" | Schedule 40 | - | 898.00 |
| Titanium Gr 2 Equal Tee | 4" | Schedule 40 | Titanium Gr 2 | 1036.00 |
One Of India’s Largest Manufacturer Of Titanium Grade 2 Pipe Fittings manufacturer In India. For final ASTM B363 Titanium Gr 2 Pipe Fitting Price List Please Call on +91-9987870874 or drop an Email to info@fastwell.in.
Titanium Grade 2 Compression Tube Fittings Specifications
| Specification | Titanium Grade 2 Pipe Fittings |
|---|---|
| Connection | Threaded/ Weld/ End Bell/ Forging/ Clamp End |
| Chemical Chart | (C≤0.10), (Fe≤0.30), Pb (Ti: balance) Etc. |
| Thickness | SCH 10s To SCH 180 |
| Standard | DIN/ ASME B16.28/ ASME/ANSI B16.9/ EN/ JIS/ MSS-SP-43/ ASME/ANSI B16.11 |
| Pressure Test | Class 150/ Class 300/ Class 300 |
| Types Of Ti Gr. 2 Fittings | End Cap/ Elbow/ Tee/ Reducer/ Stub End/ Pipe Bend |
| Welding Methods | (1) Welded, (2) ButtWeld, (3) Seamless |
| Size | 1/2" Inch To 18" Inch |
Titanium Grade 2 Melting Point
| Melting Point | 1665 °C (3030 °F) |
|---|
Titanium Grade 2 Density In Kg/m3
| Density | 4.5 g/cm3 |
|---|
Are You Looking For A Supplier Who Is Already Supplying To Your Country Regularly? Check Our Export Destinations:
Titanium Grade 2 Pipe Fittings
South Africa, Kuwait, Brazil, Saudi Arabia (KSA)
Titanium Gr 2 Elbow
Nigeria, Turkey, Australia, Egypt, UK, Belgium
Grade 2 Ti Buttweld Fittings
Oman, Mexico, Hong Kong, Spain, Poland, Japan
UNS R50400 Reducing Tee
Singapore, Iran, Chile, Canada, Italy, China
DIN 3.7035 Seamless Fittings
Malaysia, United Kingdom -UK, Europe, UAE
ASTM B381 Titanium Gr 2 Stub End
Indonesia, Dammam -KSA, Philippines
Titanium R50400 End Cap
Thailand, Qatar, France, Europe
Titanium 3.7035 Pipe Reducer
Germany, Bangladesh, USA, Finland
Material
Our Products
Get In Touch
+91-9987870874
info@fastwell.in
Shop No. 17/B1, Ground Floor Abbas Bldg. Wing A, Jalbhai Street, Near Cama Baug Khetwadi, Grant Road (E) Mumbai – 400004. India
