Check Bs En 1092-1/ PN6/ PN10/ PN16/ PN5/ PN40/ PN63 Flange Dimensions/ Schedule Chart/ Pressure Rating/ Thickness Calculation


en 1092-1 flange

Flanges are common fittings used to connect 2 pipes of the same or different sizes. They are available in different grades and specifications. EN 1092-1 Flange is one such type of flange that is has a raised face and is 160 mechanically turned. The nominal pressure of these EN 1092-1 PN 16 Flange is equivalent to the number of bars. For example, the cold working pressure of EN 1092-1 PN 10 Flange is 10 bars and that of ON40 is 40 bars. EN 1092-1 Type 01 Plate Flange are designed in a way that they can be interchanged with American standards such as ASME or ANSI. 

En 1092-1 PN6 Flange manufacturer In India do not consider these flanges similar to the ones manufactured under American standards. However, Loose Flanges EN 1092-1 Type 02 are said to comply with the configuration requirements mentioned under MSS SP44 and ASME B16.5. EN 1092-1 Type B Raised Face Flanges have different pressure classes to facilitate the different functions of applications. According to En 1092-1 PN6 Flange Manufacturer In India, this standard provides guidelines for mechanical, dimensional, and physical properties. 

EN 1092-1 Threaded Flange is used in gas, mining, and oil refineries. Moreover, it is also used in general, commercial, and industrial wastewater applications. The material used in  3 Inch BS 1092-1 Slip On Flange has been developed from the DIN 2501 standard. Welding Ring EN 1092-1 Type 35 is a standard that is usually used for steel flange. DIN EN 1092-1 Blind Flange supplied by us is used in several industrial applications. Our customers trust us with regards to the quality of Welding Neck Flange EN 1092-1 Type 11 and are rest assured for receiving the best possible price.




Flange According To EN 1092-1 Specifications


Specification ChecklistEN 1092-1 Flange
Pressure TestClass 150 T0 Class 2500
En 1092-1 Bolt TypeHigh Strength Bolts/ Medium Strength Bolts/ Low Strength Bolts
Surface FinishSmooth And Concentric Serrated & Stock
EN 1092-1 Standard CoverPressure Class, Marking, Dimensions Chart, Schedule Chart, Tolerances, Thickness, Bolt Chart, Gasket Chart
Bore DiameterNormal Pipe Size (NPS) ≤ 10
EN 1092 Gasket TypesFull Face Gasket/ Flat Ring Gasket/ Metallic Ring Gakset
Material For SaleTantalum, Monel, Carbon Steel, Titanium, Hastalloy, Inconel, Alloy Steel, Cupro-Nickel, Nickel Alloys, Super Duplex, Copper, Stainless Steel, Brass, Duplex Steel, Bronze, Incoloy, Alloy 20.
Thickness CalculationSCH 10S/ SCH 20/ SCH 40/ SCH 60/ SCH 80/ SCH 100/ SCH 120/ SCH 160 To Schedule 180
DimensionsEN 1092-1
Different Face TypeFlat Face/ Ring type joint/Raised face
High Pressure Flanges TypesBlind Flanges/ Threaded Flanges/ Slip On Flanges/ Weld Neck Flanges/ Socket Weld Flanges
Size Chart1/2" To 24"

BS EN 1092-1 Flange Price List In India


Type Of FlangesSizeSCHClassMaterialPrice In INR (India) Per Piece
Slip On Flange1"SCH 40150Carbon Steel163.00
Slip On2"SCH 40150-277.00
Slip On3"SCH 40150-435.00
Slip On4"SCH 40150-605.00
Weld Neck Flange1"SCH 40150-342.00
Weld Neck2"SCH 40150-563.00
Weld Neck3"SCH 40150-726.00
Weld Neck4"SCH 40150-899.00
Blind Flange3/4"SCH 40150-129.00
Blind1”SCH 40150-239.00
Blind1-1/2”SCH 40150343.00
Blind2"SCH 40150Carbon Steel499.00
Blind4"SCH 40150-756.00
Blind6"SCH 40150Carbon Steel984.00

PDO approved Manufacturer Of EN 1092-1 Flange In India. For final EN 1092-1 Weld Neck Flanges Price List Please Call on +91-9987870874 or drop an Email to info@fastwell.in. Get EN 1092-1 Flange At Best Price

EN 1092 1 Flange Pressure Rating


EN 1092 1 Flange Pressure Rating

Custom Sizes In Welding Neck Flange En 1092-1 Type 11 manufacturer And Also Pay Only For Required schedule Of Din En 1092-1 Blind Flange


ASME B16.5 EN 1092-1 Flange Weight


Nominal Pipe Size For (NPS)Slip On Flanges (SORF)Threaded Flanges (NPT)Socket Weld Flanges (SWRF)Lap Joint Flanges (Loose)Blind Flanges (BLRF)Weld Neck Flanges (WNRF)
½112122
¾222222
1222223
333333
333344
2555556
8888710
39999911.5
111211111312
4131313131716.5
5151515152021
6191919192726
8303030304742
10434343437054
126464646412388
14909090105140114
161069898140180140
18130130130160220165
20165165165195285197
22185185185245355225
24220220220275430268

Welding Ring En 1092-1 Type 35 manufacturer And Bs 1092-1 Slip On Flange supplier & exporter At Lowest Possible Price In Mumbai, India


EN 1092-1 (BS4504) PN Flange Size


Nominal Size Of PipeType Of Flanges(Ø A)(D)Liner
Wall Thickness
(DN1)(DN2)
InchesInches MillimeterMillimeterMillimeter
3/4"1/2"198.5305.0
1"1/2"1108305.0
1"3/4"1108305.0
1.1/2"1/2"1127305.0
1.1/2"3/4"1127305.0
1.1/2"1"1127305.0
2"1/2"3152305.0
2"3/4"2152305.0
2"1"2152305.0
2"1.1/2"1152305.0
3"3/4"3190.5355.0
3"1"3190.5355.0
3"1.1/2"2190.5355.0
3"2"1190.5355.0
4"3/4"3228.6355.0
4"1"3228.6355.0
4"1.1/2"3228.6355.0
4"2"3228.6355.0
4"3"2228.6355.0
6"3/4"3280405.0
6"1"3280405.0
6"1.1/2"3280405.0
6"2"3280405.0
6"3"3280405.0
6"4"2280405.0
8"1"3343355.0
8"1.1/2"3343355.0
8"2"3343405.0
8"3"3343405.0
8"4"3343405.0
8"6"2343405.0
10"1"3406352.5
10"1.1/2"3406352.5
10"2"3406352.5
10"3"3406352.5
10"4"3406352.5
10"6"3406352.5
10"8"2406353.5
12"1"348335 3.5
12"1.1/2"348335 3.5
12"2"348335 3.5
12"3"348335 3.5
12"4"348335 3.5
12"6"348335 3.5
12"8"348335 3.5
12"10"248335 3.5
14"12"1533403.5
16"12"3597403.5
 16"14"2597353.5

EN 1092-1 Bolt Length


Size in (Inches)Size in (Millimeter)Number of BoltsBolt (UNC) SizeRF (Raised Face) Stud Length Stud (ISO) SizeMachine Flange Bolt Length
1/21541/255M1450
3/42041/265M1450
12541/265M1455
1 1/43241/270M1455
1 1/24041/270M1465
25045/885M1670
2 1/26545/890M1675
38045/890M1675
3 1/29085/890M1675
410085/890M1675
512583/495M2085
615083/4100M2085
820083/4110M2090
10250127/8115M24100
12300127/8120M24100
14350121135M27115
16400161135M27115
18450161 1/8145M30125
20500201 1/8160M30140
24600201 1/4170M33150

Why To Pay Extra If You Have Choice To Get Exact Wall Thickness And Sizes In En 1092-1 Threaded Flange, manufacturer Specifications Of Loose Flanges En 1092-1 Type 02

ANSI B16.5 EN 1092-1 Torque


Flanges Size in (Inches)Flanges Size in (Millimeter)Radial Projection (Maximum)
No Deeper Than the Bottom In MMDeeper Than the Bottom In MM
1/2153.01.5
3/4203.01.5
1253.01.5
1 1/4323.01.5
1 1/2403.01.5
2503.01.5
2 1/2653.01.5
3804.51.5
3 1/2906.03.0
41006.03.0
51256.03.0
61506.03.0
82008.04.5
102508.04.5
123008.04.5
143508.04.5
1640010.04.5
1845012.06.0
2050012.06.0
2460012.06.0

EN 1092-1 Gasket Dimensions


NPS For (Normal Pipe Size)Gasket (I.D.) Inside Daimeter
Gasket (O.D.) Outside Daimeter
#150LB #300LB #400LB #600LB #900LB
1/2"0.841.8752.1252.1252.1252.50
3/4"1.062.252.6252.6252.6252.75
1"1.312.6252.8752.8752.8753.125
1 1/4"1.6633.253.253.253.50
1 1/2"1.913.3753.753.753.753.875
2"2.384.1254.3754.3754.3755.625
2 1/2"2.884.8755.1255.1255.1256.50
3"3.505.3755.8755.8755.8756.625
4"4.506.8757.1257.007.6258.125
5"5.567.758.508.3759.509.75
6"6.628.759.8759.7510.5011.375
8"8.621112.12512.0012.62514.125
10"10.7513.37514.2514.12515.7517.125
12"12.7516.12516.62516.5018.0019.625

Welding Neck Flange EN 1092-1 Type 11 Packaging With Good Quality


EN Flanges Packaging
En 1092-1 flange Packaging


Flange EN 1092-1 Type 13 Face Types


  • Raised Face (RF) Lap Joint Flanges
  • Ring Type Joint (RTJ) Lap Joint Flanges
  • Flat Face (FF) Lap Joint Flanges

EN 1092-1 Loose Flange Marking


EN 1092-1 Flange Marking includes ANSI Or ASME/ ASA Code

  1. Name of Manufacturer = (Fastwell Engineering)
  2. NPS = (4" Inch)
  3. Flanges Type = (Slip On)
  4. Schedule = (SCH 40)
  5. Material Designation = (ASTM A182 F304)
  6. Standard = (DN 25)
  7. Class = (600#)
  8. Country Name = (Made In India)
en 1092-1 loose flange marking format


Flange EN 1092-1 Type 02 Applications


  • EN 1092-1 Flanges For Oil And Gas Industry
  • EN 1092-1 Weld Neck Flanges For Water Pipeline Inspection
  • EN 1092-1 Type 11 PN10 Flanges For Power Plant Industry
  • BS EN 1092-1 Type B Raised Face Flanges For Food Processing Industry
  • DIN EN 1092-1 Slip On Welding Flanges For Chemical Industry

EN 1092-1 Type 01 Plate Flange Measurement


  • O For Outside Diameter of flanges
  • C For Thickness of flange
  • R For Diameter of raised face
  • X For Hub Diameter at base
  • Y For Length through hub
  • T For (Minimum) thread length
  • Q For (Minimum) diameter of bolt circle

Class 300 DIN EN 1092-1 Steel Flange Hot Forging Machine


Class 300 DIN EN 1092-1 Steel Flange Hot Forging Machine

EN 1092-1 Flange Types


 En 1092-1 Pn10 Flanges

En 1092-1 Pn10 Flanges

 Loose Flange En 1092-1 Type 02

Loose Flange En 1092-1 Type 02

 Weld Neck Flange En 1092 1

Weld Neck Flange En 1092 1

  Flange En 1092-1 Type 02

Flange En 1092-1 Type 02

  En 1092-1 Slip On Flange

En 1092-1 Slip On Flanges

En 1092-1 Threaded Flange

En 1092-1 Threaded Flanges

 Welding Neck Flange En 1092-1 Type 11

Welding Neck Flange En 1092-1 Type 11

 Welding Ring En 1092-1 Type 35

Welding Ring En 1092-1 Type 35

 En 1092-1 Pn16 Flange

En 1092-1 Pn16 Flanges

  En 1092-1 Pn10 Flange

En 1092-1 Pn10 Flanges

En 1092-1 Pn40 Flange

En 1092-1 Pn40 Flanges

En 1092-1 Pn25 Flange

En 1092-1 Pn25 Flanges

 En 1092-1 Pn 63 Flange

En 1092-1 Pn 63 Flanges

 En 1092 1 Raised Face Flange

En 1092 1 Raised Face Flanges

 En 1092-1 RF Flange

En 1092-1 RF Flanges


EN 1092-1 Flange Dimensions PDF


EN 1092-1 Flange Dimensions PDF

EN 1092-1 PN6 Flange Dimensions


EN 1092-1 PN6 Flange Dimensions
Diameter Of EN 1092-1 FlangesNormal PipesPipe FlangesThreaded And ScrewsWeight In Kilogram
(d1)(k)(D)(b)(d2)(Thread)(Bolt holes)(KG)
1521,322,055801211M1040,401
2026,927,565901411M1040,590
2533,734,5751001411M1040,716
3242,443,5901201614M1241,153
4048,349,51001301614M1241,344
5060,361,51101401614M1241,478
6576,177,51301601614M1241,850
8088,990,51501901818M1642,944
100114,3116,01702101818M1643,247
125139,7141,52002402018M1684,301
150168,3170,52252652018M1684,741
200219,1221,52803202218M1686,862
250273,0276,53353752418M16128,893
300323,9327,53954402422M201211,880
350355,6359,54454902622M201216,788
400406,4411,04955402822M201619,781
450457,0462,05505953022M201624,495
500508,0513,56006453022M202026,307
600610,0616,57057553226M242034,702
700711,0714,28108604026M242452,441
800813,0815,89209754430M272471,262
900914,0917,4102010754830M272486,269
10001016,01019,0112011755230M2728101,340
12001220,01224,0134014056033M3032162,638
14001420,01424,0156016307236M3336257,772
16001620,01624,0176018308036M3340324,382

EN 1092-1 PN16 Flange Dimensions


EN 1092-1 PN16 Flange Dimensions
Diameter Of EN 1092-1 FlangesNormal PipesPipe FlangesThreaded And ScrewsWeight In Kilogram
(d1)(k)(D)(b)(d2)(Thread)(Bolt holes)(KG)
1017,218,060901414M1240,602
1521,322,065951414M1240,668
2026,927,5751051614M1240,933
2533,734,5851151614M1241,106
3242,443,51001401818M1641,816
4048,349,51101501818M1642,075
5060,361,51251652018M1642,723
6576,177,51451852018M1643,310
8088,990,51602002018M1683,592
100114,3116,01802202218M1684,375
125139,7141,52102502218M1685,394
150168,3170,52402852422M2087,123
200219,1221,52953402622M20129,705
250273,0276,53554052926M241214,164
300323,9327,54104603226M241218,928
350355,6359,04705203526M241628,118
400406,4411,05255803830M271635,754
450457,0462,05856404230M272045,992
500508,0513,56507154633M302063,832
600610,0616,57708405536M3320101,285
700711,0714,28409106336M3324111,103
800813,0815,895010257439M3624158,555
900914,0917,4105011258239M3628192,239
10001016,01019,0117012559042M3928269,554

Tolerance Formula Of En 1092-1 Type 01 Plate Flange, We Offer A Huge Selection Of En 1092-1 Type B Raised Face Flanges.

Standard Dimensions Of EN 1092-1 Type 11 PN10 Weld Neck Flange


Standard Dimensions Of EN 1092-1 Type 11 PN10 Weld Neck Flange
DN Of Weld NeckWN FlangeLong Welding NeckRF For (Raised face)Stud Bolts For FlangesWN Flange Weight In Kilogram (KG)
d1kDbh1d3srh2d4fd2Threadholes Of Bolt(Kg)
200219,129534024622346,301016268322M20811,600
250273,035039526682926,301216320322M201215,800
300323,940044526683427,101216370422M201218,300
350355,646050526683857,101216430422M201625,300
400406,451556526724407,101216482426M241630,600
450457,056561528724887,101216532426M242035,100
500508,062067028755427,101216585426M242040,500
600610,072578030826428,001218685530M272052,900
700711,084089535857468,801218800530M272475,800
800813,0950101538968508,801218905533M3024102,000
900914,010501115389995012,5012201005533M3028121,000
10001016,01160123044105105212,5016201110536M3328161,000
12001219,01380145555132125612,5016251330539M3632258,000
14001422,01590167565143146014,2016251535542M3936371,000
16001626,01820191575159166616,0016251760548M4540547,000
18001829,02020211585175186817,5016301960548M4544691,000
20002032,02230232590186207217,5016302170548M4548830,000
22002235,024402550100202227520,0018352370556M52521.073,000
24002438,026502760110218247822,2018352570556M52561.329,000
26002620,028502960110224268025,0018402780556M52601.574,000
28002820,030703180124244288225,0018403000556M52641.987,000
30003020,032903405132257308532,0018453210562M56682.476,000

Dimension Table Of EN 1092-1 Type 11 PN 16 Weld Neck Flange


DN Of Weld NeckWN FlangeLong Welding NeckRF For (Raised face)Stud Bolts For FlangesWN Flange Weight In Kilogram (KG)
d1kDbh1d3srh2d4fd2Threadholes Of Bolt(Kg)
1521,365951638322,004645214M1240,678
2026,9751051840402,304658214M1240,768
2533,7851151840462,604668214M1241,090
3242,41001401842562,606678218M1641,300
4048,31101501845642,606788318M1641,910
5060,31251651845742,968102318M1642,530
6576,11451851845922,9610122318M1643,030
8088,916020020501053,2610138318M1683,920
100114,318022020521313,6812158318M1684,620
125139,721025022551564,0812188318M1686,300
150168,324028522551844,51012212322M2087,810
200219,129534024622356,301016268322M201211,500
250273,035540526702926,301216320326M241216,700
300323,941046028783447,101216378426M241222,100
350355,647052030823908,001216438426M241632,800
400406,452558032854458,001216490430M271641,100
450457,058564034834908,001216550430M272048,500
500508650715,036845488,01216610433M302063,400
600610770840,0408867010,01218725536M332096,000
700711840910,04010475510,01218795536M332496,500
8008139501025,04110885512,51220900539M3624122,000
90091410501125,04811895512,512201000539M3628155,000
1000101611701255,059137105812,516221115542M3928233,000
1200121913901485,078160126214,216301330548M4532390,000
1400142215901685,084177146516,016301530548M4536495,000
1600162618201930,0102204166817,516351750556M5240760,000
1800182920202130,0110218187020,016351950556M5244929,000
2000203222302345,0124238207222,016402150562M56481.185,000

EN 1092-1 Type 11 PN 25 Weld Neck Flange Dimensions Chart


DN Of Weld NeckWN FlangesLong Welding NeckRF For (Raised face)Stud Bolts For FlangesWN Flanges Weight In Kilogram (KG)
(d1)(k)(D)(b)(h1)(d3)(s)(r)(h2)(d4)(f)(d2)(Thread)(holes Of Bolt)(Kg)
200219,131036030802446,31016278326M241217,100
25027337042532882987,11218335330M271224,300
300323,943048534923528,01218395430M271631,800
350355,6490555381003988,01220450433M301648,800
400406,4550620401104528,81220505436M331663,300
450457600670461105008,81220550436M332076,000
5005086607304812555810,01220615436M332097,000
6006107708454812566011,01220720539M3620121,000
7007118759605012976014,21220820542M3924155,000
80081399010855313886416,01222930548M4524205,000
900914109011855714896817,512241030548M4528249,000
100010161210132063160107020,016241140556M5228338,000

EN 1092-1 Type 01 PN 25 Plate Flange Dimensional Formula


Size Of DNNormal PipesPipe FlangesStud Bolts For FlangesFlanges Weight In KG (Kilogram)
(d1)(k)(D)(b)(d2)(Thread)(holes Of Bolts)(KG)
1521,322,065951414M1240,668
2026,927,5751051614M1240,933
2533,734,5851151614M1241,106
3242,443,51001401818M1641,816
4048,349,51101501818M1642,075
5060,361,51251652018M1642,723
6576,177,51451852218M1683,465
8088,990,51602002418M1684,310
100114,3116,01902352622M2086,056
125139,7141,52202702826M2488,170
150168,3170,52503003026M24810,238
200219,1221,53103603226M241214,245
250273,0276,53704253530M271220,087
300323,9327,54304853830M271626,526
350355,6359,54905554233M301641,656
400406,4411,05506204836M331657,456
450457,0462,06006705436M332069,548
500508,0513,56607305836M332086,736
600610,0616,57708456839M3620126,866
700711,2714,08759608542M3924193,031
800812,8816,099010859548M4524266,311

EN 1092-1 Type 05 PN 16 Blind Flange Dimensions


Nominal Dia. Of
DN
Pipe FlangesStud Bolts For FlangesFlanges Weight In Kilogram
(k)(D)(b)(d2)(Thread)(holes Of Bolts)(KG)
1565951614M1240,813
20751051814M1241,140
25851151814M1241,380
321001401818M1642,030
401101501818M1642,350
501251651818M1642,880
651451851818M1643,643
801602002018M1684,610
1001802202018M1685,650
1252102502218M1688,130
1502402852222M20810,500
2002953402422M201216,200
2503554052626M241225,000
3004104602826M241235,100
3504705203026M241648,000
4005255803230M271663,500
4505856404030M272096,600
5006507154433M3020133,000
6007708405436M3320226,000
7008409105836M3324285,000
80095010256239M3624388,000
900105011256439M3628483,000
1000117012556842M3928640,000

EN 1092-1 Type 13 PN 16 Threaded Flange Dimensions


Normal Dai. Of DN Pipe FlangesWN (Weld Neck)RF (Raised face)Screws And ThreadedFlanges Weight In KG
(d1)(Thread)(k)(D)(b)(h1)(d3)(d4)(f)(d2)(Thread)(Holes Of Bolts)(KG)
1521,3R 1/2″6595162235,045,02,014M1240,722
2026,9R 3/4″75105182645,058,02,014M1241,040
2533,7R 1″85115182852,068,02,014M1241,250
3242,4R 1-1/4″100140183060,078,02,018M1641,810
4048,3R 1-1/2″110150183270,088,03,018M1642,060
5060,3R 2″125165182884,0102,03,018M1642,390
6576,1R 2-1/2″1451851832104,0122,03,018M1642,970
8088,9R 3″1602002034118,0138,03,018M1683,780
100114,3R 4″1802202040140,0158,03,018M1684,380
125139,7R 5″2102502244168,0188,03,018M1686,070
150168,3R 6″2402852244195,0212,03,022M2087,240

EN 1092-1 Equivalent ASME


Form: types of Contact FacesDIN EN 1092-1
Without Raised Face (RF)Form A
Raised Face (RF) (Rz=160 Mechanical Turned)Form B1
Raised Face (RF) ( Rz=40 Mechanical Turned)Form B1
Raised Face (RF) (Rz=16 Mechanical Turned)Form B2
ASME B16.5 Tongue According to DIN2512Form C
ASME B16.5 Groove According to DIN 2512Form D
ASME B16.5 Male According to DIN 2513Form E
ASME B16.5 Female According to DIN 2513Form F
Female According to DIN 2514Form G
Male According to DIN 2514Form H

Some Of The Countries We Have Supplied Various Types Of Industrial EN 1092-1 Flanges Recently:


Malaysia, United Kingdom -UK, Europe, UAE

EN 1092-1 Flanges

Europe, Malaysia, United Kingdom -UK, UAE

Philippines, Indonesia, Dammam -KSA,

En 1092-1 PN 16 Flanges

Indonesia, Philippines, Dammam -KSA

Qatar, Europe, Thailand, France

Welding Neck Flanges En 1092-1 Type 11

Qatar, France, Thailand, Europe

Bangladesh, Germany, Finland, USA

Din En 1092-1 Blind Flanges

Finland, USA, Germany, Bangladesh

South Africa, Brazil, Saudi Arabia (KSA), Kuwait

BS 1092-1 Slip On Flanges

Saudi Arabia (KSA), Brazil, South Africa, Kuwait

Australia, Nigeria, Turkey, UK, Belgium, Egypt

En 1092-1 Threaded Flanges

Nigeria, Australia, Egypt, UK, Turkey, Belgium

Hong Kong, Spain, Oman, Mexico, Poland, Japan

Loose Flanges En 1092-1 Type 02

Oman, Hong Kong, Mexico, Spain, Poland, Japan

Iran, Italy, Chile, Singapore, Canada, China

En 1092-1 Type 01 Plate Flanges

Singapore, Italy, Iran, Chile, Canada, China