DIN 2527 Flange and DIN 2527 PN6/ PN10/ PN16 Blind Flange manufacturer

Most Reliable Din 2527 Blind Flanges manufacturer & supplier In Mumbai, India

Flanges made up of different standards and specifications are available in the market. One such standard is the DIN 2527 Flange. It can be used at a maximum temperature of 120 degrees C along with a working pressure of 16 bars. The yield point of these bars may become lower in case the temperature range exceeds 120 degrees C and hovers between 120 and 300 degrees C. DIN 2527 PN6/ Pn16/ Pn40 Plate Flange can be made up of stainless steel as well as carbon steel as per the standards. They are manufactured from cast or forged steel grade. This grade also consists of a size chart.

As per 2 Inch DIN 2527, Pn10 Slip On Flange manufacturer In India the size chart denotes the thickness and outer diameter of these flanges that fall under this standard the size range can be between ½ inch to 48 inches. One of the important aspects of this flange is the surface treatment. DIN 2527 Raised Face Flanges can be surface treated with zinc by coating the flange with a thick layer either by hot or cold galvanizing. This coating can also be applied by electroplating it. Moreover, these DIN 2527 Pn40 Forged Flanges can also be coated with anti-rust paint, yellow transparent, and oil black paint.

This enhances the resistance of DIN 2527 Pn10 Socket Weld Flange towards corrosion and also improves the work service life. These flanges are passed through various tests such as direct reading spectrograph, hydrostatic testing machine, sandblasting machine, and so on before supplying them to the customers. This ensures that DIN 2527 Pn40 Large Diameter Flanges have retained the best possible properties of the base element. They are used in heavy oil refineries, bitumen upgraders, nuclear power plants, and petrochemical industries.

Table Of Content:

DIN 2527 Flange Dimensions
DIN 2527 PN6 Flange Dimensions
DIN 2527 PN10 Flange Dimensions
DIN 2527 PN16 Flange Dimensions
DIN 2527 PN40 Flange Dimensions
DN50 Flange Dimensions
DN65 Flange Dimensions
DIN 2527 Flange Gasket Chart
ANSI B16.5 Class 150 DIN 2527 PN16 Forged Flanges Bolt Size Chart In MM
Marking Of DIN 2527 Blind Flanges
ASME B16.5 Face Types
DIN 2527 Weld Neck Flange Tolerance Chart
Flange DIN 2527 Pn16 Thickness Calculation
Class 300 DIN 2527 Flange Cutting Machine
Schedule 40 DIN 2527 Temperature Ratings

DIN 2527 Standard PDF
Applications For DIN 2527 Pipe Flanges
DIN 2527 Pn6 Flange Packaging With Good Quality In Mumbai, India
DIN 2527 PN10 Blind Flange Weight Chart
Measurement Of DIN 2527 EN 1092 1 Flanges
Din 2527 Flange Types
Blind Flange DIN 2527 PN10 Material Specification
DIN 2527 Flanges Size Length
Tolerance Chart Of DIN 2527 PN16 Flange
Price List Of DIN 2527 Flange
Bolt Torque DIN 2527 Steel Flanges

Check Din 2527 Pn6/ Pn16/ Pn40 Plate Flange Dimensions, Weld Neck Flanges Din 2527 6 Material Specification

DIN 2527 Flange Dimensions

DIN 2527 PN6 Flange Dimensions

NPS For Normal Pipe Size	Flange Dimension			Screw Daimeter		Approx. DIN 2527 Flange Weight In (KG) Kilogram
NPS For Normal Pipe Size	DIN 2527 Flanges Diameter	Wall Thickness of DIN 2527 Flanges	Bolt Circle (B.C.) Diameter	Holes No.	Bolt Holes (B.H.) Diameter	Approx. DIN 2527 Flange Weight In (KG) Kilogram
(DIN)	(D )	(b )	(k )	(X)	(d2 )	(KG/PCS)
10	75	12	50	4	11	0.38
15	80	12	55	4	11	0.44
20	90	14	65	4	11	0.66
25	100	14	75	4	11	0.82
32	120	14	90	4	14	1.18
40	130	14	100	4	14	1.39
50	140	14	110	4	14	1.62
65	160	14	130	4	14	2.14
80	190	16	150	4	48	3.43
100	210	16	170	4	18	4.22
125	240	18	200	8	18	6.1
150	265	18	225	8	18	7.51
175	295	20	255	8	18	10.41
200	320	20	280	8	18	12.31
250	375	22	335	12	18	18.55
300	440	22	395	12	22	25.47
350	490	22	445	12	22	31.78
400	540	22	495	16	22	38.5
500	645	24	600	20	22	60.13
600	755	28	705	20	26	96.07
700	860	30	810	24	26	133.8
800	975	32	920	24	30	183.29
900	1075	36	1020	24	30	251.7
1000	1175	42	1120	28	30	350.98

DIN 2527 PN10 Flange Dimensions

Diameter Of (NPS)	DIN 2527 Flange			(Screws) And (NPT)			Weight in Kilogram
	(D)	(b)	(k)	(Number)	(Thread)	(d2)	(Shape B)
	(D)	(b)	(k)	(Number)	(Thread)	(d2)	(Kilogram)
15	95	14	65	4	M 12	14	0,72
20	105	16	75				1,01
25	115	16	85				1,23
32	140	16	100		M 16	18	1,8
40	150	16	110				2,09
50	165	18	125				2,88
65	185	18	145				3,66
80	200	20	160				4,77
100	220	20	180	8			5,65
125	250	22	210				8,42
150	285	22	240		M 20	22	10,4
200	340	24	295				16,5
250	395	26	350	12			24
300	445	26	400	12			30,9
350	505	26	460	16			40,6
400	565	26	515	16	M 24	26	49,4
500	670	28	620	20	M 24	26	75

DIN 2527 PN16 Flange Dimensions

Diameter Of DIN 2527 Flange	Dimensions Of DIN 2527 Flange			Screws And Threaded			Weight In Kilogram
	(D)	(b)	(k)	(Number)	(Thread)	(d2)	(Shape B)
	(D)	(b)	(k)	(Number)	(Thread)	(d2)	Kilogram
15	95	14	65	4	M 12	14	0,72
20	105	16	75				1,01
25	115	16	85				1,23
32	140	16	100		M 16	18	1,8
40	150	16	110				2,09
50	165	18	125				2,88
65	185	18	145				3,66
80	200	20	160	8			4,77
100	220	20	180				5,65
125	250	22	210				8,42
150	285	22	240		M 20	22	10,4
200	340	24	295	12	M 20	22	16,1
250	405	26	355		M 24	26	24,9
300	460	28	410				35,1
350	520	30	470	16			47,8
400	580	32	525	16	M 27	30	63,5
500	715	36	650	20	M 30	33	102

DIN 2527 PN40 Flange Dimensions

NPS For Normal Pipe Size	Dimension Of Flange			Parameter Of Screw		Weight Table Of Approx. Flange
NPS For Normal Pipe Size	Diameter Of DIN 2527 PN40 Flanges	Thickness of DIN 2527 PN40 Flange	Bolt Circle (B.C.) Thickness	holes No.	Bolt Holes (B.H.) Diameter	Weight Table Of Approx. Flange
(DIN)	(D )	(b )	(k )	(X)	(d2 )	(Kilogram/PCS)
10	90	16	60	4	14	0.72
15	95	16	65	4	14	0.81
20	105	18	75	4	14	1.14
25	115	18	85	4	14	1.38
32	140	18	100	4	18	2.03
40	150	18	110	4	18	2.35
50	165	20	125	4	18	3.2
65	185	22	145	8	18	4.29
80	200	24	160	8	18	5.54
100	235	24	190	8	22	7.6
125	270	26	220	8	26	10.82
150	300	28	250	8	26	14.6
175	350	32	295	12	30	22.04
200	375	34	320	12	30	27.21
250	450	38	385	12	33	44.38
300	515	42	450	16	33	64.17
350	580	46	510	16	36	89.52
400	660	50	585	16	39	126.76
500	755	56	670	20	42	184.63
600	890	62	795	20	48	285.17
700	995	64	900	24	48	368.83
800	1140	70	1030	24	56	528.39
900	1250	76	1140	28	56	690.99

DN50 Flange Dimensions

2"	Diameter Of Flange	PCD	Number of Bolt Holes	Bolts Diameter	Holes Diameter	Raised Face (RF) Diameter	Raised Face (RF) Height
PN6	140(mm)	110(mm)	4	M12	14(mm)	90(mm)	3(mm)
PN10	165(mm)	125(mm)	4	M16	18(mm)	102(mm)	3(mm)
PN16	165(mm)	125(mm)	4	M16	18(mm)	102(mm)	3(mm)
PN25	165(mm)	125(mm)	4	M16	18(mm)	102(mm)	3(mm)
PN40	165(mm)	125(mm)	4	M16	18(mm)	102(mm)	3(mm)
PN64	180(mm)	135(mm)	4	M20	22(mm)	102(mm)	3(mm)
Table D	6" (152mm)	4 1/2" (114mm)	4	5/8" (16mm)	11/16" (17mm)
Table E	6" (152mm)	4 1/2" (114mm)	4	5/8" (16mm)	11/16" (17mm)
Table F	6 1/2" (165mm)	5" (127mm)	4	5/8" (16mm)	11/16" (17mm)
Table H	6 1/2" (165millimeter)	5" (127millimeter)	4	5/8" (16millimeter)	11/16" (17millimeter)	4" (102millimeter)	1/16" (2millimeter)
ANSI 125/150	6" (152millimeter)	4 3/4" (121millimeter)	4	5/8" (16millimeter)	3/4" (19millimeter)	3 5/8" (92millimeter)	1/16" (2millimeter)
ANSI 300	6 1/2" (165millimeter)	5" (127millimeter)	4	5/8" (16millimeter)	3/4" (19millimeter)	3 5/8" (92mm)	1/16" (2mm)

DN65 Flange Dimensions

2 1/2"	Diameter Of Flange	PCD	Number of (B.H.) Bolt Holes	Bolts Diameter	Holes Diameter	Diameter of RF	Height of RF
PN6	160(mm)	130(mm)	4	M14	14(mm)	110(mm)	3(mm)
PN10	185(mm)	145(mm)	4	M18	18(mm)	122(mm)	3(mm)
PN16	185(mm)	145(mm)	4	M18	18(mm)	122(mm)	3(mm)
PN25	185(mm)	145(mm)	8	M18	18(mm)	122(mm)	3(mm)
PN40	185(mm)	145(mm)	8	M18	18(mm)	122(mm)	3(mm)
PN64	205(mm)	160(mm)	8	M22	22(mm)	122(mm)	3(mm)
Table D	6 1/2" (165millimeter)	5" (127millimeter)	4	5/8" (16mm)	11/16" (17mm)
Table E	6 1/2" (165millimeter)	5" (127millimeter)	4	5/8" (16mm)	11/16" (17mm)
Table F	7 1/4" (184mm)	5 3/4" (146mm)	8	5/8" (16Millimeter)	11/16" (17Millimeter)
Table H	7 1/4" (184mm)	5 3/4" (146mm)	8	5/8" (16mm)	11/16" (17mm)	4 1/2" (114mm)	1/16" (2mm)

Searching Din 2527 Pn10 Slip On Flange? manufacturer Of Din 2527 Raised Face Flanges With Best Price And Fast Delivery

DIN 2527 Flange Gasket Chart

NPS For (Normal Pipe Size)	Gasket (I.D.) Inside Daimeter	Gasket (O.D.) Outside Daimeter
NPS For (Normal Pipe Size)	Gasket (I.D.) Inside Daimeter	#150LB	#300LB	#400LB	#600LB	#900LB
1/2"	0.84	1.875	2.125	2.125	2.125	2.50
3/4"	1.06	2.25	2.625	2.625	2.625	2.75
1"	1.31	2.625	2.875	2.875	2.875	3.125
1 1/4"	1.66	3	3.25	3.25	3.25	3.50
1 1/2"	1.91	3.375	3.75	3.75	3.75	3.875
2"	2.38	4.125	4.375	4.375	4.375	5.625
2 1/2"	2.88	4.875	5.125	5.125	5.125	6.50
3"	3.50	5.375	5.875	5.875	5.875	6.625
4"	4.50	6.875	7.125	7.00	7.625	8.125
5"	5.56	7.75	8.50	8.375	9.50	9.75
6"	6.62	8.75	9.875	9.75	10.50	11.375
8"	8.62	11	12.125	12.00	12.625	14.125
10"	10.75	13.375	14.25	14.125	15.75	17.125
12"	12.75	16.125	16.625	16.50	18.00	19.625

ANSI B16.5 Class 150 DIN 2527 PN16 Forged Flanges Bolt Size Chart In MM

Size in (Inches)	Size in (Millimeter)	Number of Bolts	Bolt (UNC) Size	RF (Raised Face) Stud Length	Stud (ISO) Size	Machine Flange Bolt Length
1/2	15	4	1/2	55	M14	50
3/4	20	4	1/2	65	M14	50
1	25	4	1/2	65	M14	55
1 1/4	32	4	1/2	70	M14	55
1 1/2	40	4	1/2	70	M14	65
2	50	4	5/8	85	M16	70
2 1/2	65	4	5/8	90	M16	75
3	80	4	5/8	90	M16	75
3 1/2	90	8	5/8	90	M16	75
4	100	8	5/8	90	M16	75
5	125	8	3/4	95	M20	85
6	150	8	3/4	100	M20	85
8	200	8	3/4	110	M20	90
10	250	12	7/8	115	M24	100
12	300	12	7/8	120	M24	100
14	350	12	1	135	M27	115
16	400	16	1	135	M27	115
18	450	16	1 1/8	145	M30	125
20	500	20	1 1/8	160	M30	140
24	600	20	1 1/4	170	M33	150

Contact Us For Buy Din 2527 Pn40 Forged Flanges Instant Delivery In Mumbai, India, Weight Formula Of Din 2527 Pn10 Socket Weld Flange

Marking Of DIN 2527 Blind Flanges

DIN 2527 Flange Marking includes ANSI Or ASME/ ASA Code

Name of Manufacturer = (Fastwell Engineering)
NPS = (2" Inch)
Flanges Type = (SORF)
Schedule = (SCH 80)
Material Designation = (ASTM A182 F44)
Class = (150#)
Country Name = (Made In India)

marking format of din 2527 blind flanges

ASME B16.5 Face Types

Raised Face (RF) Lap Joint Flange
Ring Type Joint (RTJ) Lap Joint Flange
Flat Face (FF) Lap Joint Flange

DIN 2527 Weld Neck Flange Tolerance Chart

DIN 2527 Flange	Type Of Daimeter	Tolerance
(A)	(O.D.) For Outside Diameter	When Outside Diameter is 24 Inch or less: ±1/16" (1.6 millimeter) When Outside Diameter is over 24": ±1/8" (3.2 millimeter)
(D)	(I.D.) For Inside Diameter	10 Inch and smaller: ±1/32" (0.8 in millimeter) 12 Inch thru 18": +1/8" (3.2 in millimeter) 20 Inch and larger: -1/16" (1.6 in millimeter)
(B)	Contact Face	1/16" (RF): ±1/32" (0.8 millimeter) 1/4" (RF), Tongue & Groove (male & female): ±1/64" (0.4 millimeter)
(J)	Hub At Base Daimeter	When hub base is 24 inch or smaller: ±1/16" (1.6 millimeter) When hub base is over 24": ±1/8" (3.2 millimeter)
(H)	Diameter of hub at point of welding	5 inch and smaller: +3/32" (2.4 millimeter), -1/32" (0.8 millimeter) 6 inch and larger: +5/32" (4.0 millimeter), -1/32 (0.8 millimeter)
(P)	Drilling	Bolt circle (BC): ±1/16" (1.6 mill.) Bolt hole (BH) spacing: ±1/32" (0.8 mill.)
	Eccentricity of bolt circle (bc) with respect to facing	2 1/2" and smaller ±1/32" (0.8 millimeter) maximum 3" and larger ±1/16" (1.6 millimeter) maximum
(C)	Wall Thickness	18 inch and smaller: ±1/8" (3.2 mill.), -0" 20 inch and larger: ±3/16" (4.8 mill.), -0"
(K)	hub Length	10 Inch and smaller: ±1/16" (1.6 millimeter) 12 Inch and larger: ±1/8" (3.2 millimeter)

Flange DIN 2527 Pn16 Thickness Calculation

NPS For Normal Pipe Size	O.D. For (Outside Daimeter)	10 SCH	20 SCH	30 SCH	STD Wall	40 SCH	60 SCH	EXT Hvy	80 SCH	100 SCH	120 SCH	140 SCH	160 SCH	XX Hvy
½	0.84	0.083	...	...	0.109	0.109	...	0.147	0.147	...	...	...	0.188	0.294
¾	1.05	0.083	...	...	0.113	0.113	...	0.154	0.154	...	...	...	0.219	0.308
1	1.315	0.109	...	...	0.133	0.133	...	0.179	0.179	...	...	...	0.25	0.358
1 ¼	1.66	0.109	...	...	0.14	0.14	...	0.191	0.191	...	...	...	0.25	0.382
1 ½	1.9	0.109	...	...	0.145	0.145	...	0.2	0.2	...	...	...	0.281	0.4
2	2.375	0.109	...	...	0.154	0.154	...	0.218	0.218	...	...	...	0.344	0.436
2 ½	2.875	0.12	...	...	0.203	0.203	...	0.276	0.276	...	...	...	0.375	0.552
3	3.5	0.12	-	-	0.216	0.216	-	0.3	0.3	-	-	-	0.438	0.6
3 ½	4	0.12	-	-	0.226	0.226	-	0.318	0.318	-	-	-	-	0.636
4	4.5	0.12	-	-	0.237	0.237	-	0.337	0.337	-	0.438	-	0.531	0.674
5	5.563	0.134	-	-	0.258	0.258	-	0.375	0.375	-	0.5	-	0.625	0.75
6	6.625	0.134	-	-	0.28	0.28	-	0.432	0.432	-	0.562	-	0.719	0.864
8	8.625	0.148	0.25	0.277	0.322	0.322	0.406	0.5	0.5	0.594	0.719	0.812	0.906	0.875
10	10.75	0.165	0.25	0.307	0.365	0.365	0.5	0.5	0.594	0.719	0.844	1	1.125	1
12	12.75	0.18	0.25	0.33	0.375	0.406	0.562	0.5	0.688	0.844	1	1.125	1.312	1
14	14	0.25	0.312	0.375	0.375	0.438	0.594	0.5	0.75	0.938	1.094	1.25	1.406	-
16	16	0.25	0.312	0.375	0.375	0.5	0.656	0.5	0.844	1.031	1.219	1.438	1.594	-
18	18	0.25	0.312	0.438	0.375	0.562	0.75	0.5	0.938	1.156	1.375	1.562	1.781	-
20	20	0.25	0.375	0.5	0.375	0.594	0.812	0.5	1.031	1.281	1.5	1.75	1.969	-
22	22	0.25	-	-	0.375	-	-	0.5	-	-	-	-	-	-
24	24	0.25	0.375	0.562	0.375	0.688	0.969	0.5	1.219	1.531	1.812	2.062	2.344	-
26	26	-	-	-	0.375	-	-	0.5	-	-	-	-	-	-
30	30	0.312	0.5	0.625	0.375	-	-	0.5	-	-	-	-	-	-
36	36	0.312	0.5	0.625	0.375	0.75	-	0.5	-	-	-	-	-	-
40	40	-	-	-	0.375	-	-	0.5	-	-	-	-	-	-
42	42	……..	……..	……..	0.375	……..	……..	0.5	……..	……..	……..	……..	……..	……..
48	48	……..	……..	……..	0.375	……..	……..	0.5	……..	……..	……..	……..	……..	……..

ressure Rating Formula Of Din 2527 Pn40 Large Diameter Flanges, View Din 2527 Flange Dimensions PDF.

Class 300 DIN 2527 Flange Cutting Machine

Schedule 40 DIN 2527 Temperature Ratings

DIN 2527 Standard PDF

EN 1092-2
EN 1092-1
AWWA C207
ASA
MSS SP44
ASME B16.47 Series A And B
API
ASME B16.5

Applications For DIN 2527 Pipe Flanges

DIN 2527 Blind Flange For Oil And Gas Industry
DIN 2527 PN6 Flange For Water Pipeline Inspection
DIN 2527 PN16 Blind Flange For Chemical Industry
DIN 2527 PN40 Flange For Power Plant Industry
DIN 2527 PN10 Blind Flange For Food Processing Industry

DIN 2527 Pn6 Flange Packaging With Good Quality In Mumbai, India

DIN 2527 PN10 Blind Flange Weight Chart

Nominal Pipe Size For (NPS)	Slip On Flanges (SORF)	Threaded Flanges (NPT)	Socket Weld Flanges (SWRF)	Lap Joint Flanges (Loose)	Blind Flanges (BLRF)	Weld Neck Flanges (WNRF)
½	1	1	2	1	2	2
¾	2	2	2	2	2	2
1	2	2	2	2	2	3
1¼	3	3	3	3	3	3
1½	3	3	3	3	4	4
2	5	5	5	5	5	6
2½	8	8	8	8	7	10
3	9	9	9	9	9	11.5
3½	11	12	11	11	13	12
4	13	13	13	13	17	16.5
5	15	15	15	15	20	21
6	19	19	19	19	27	26
8	30	30	30	30	47	42
10	43	43	43	43	70	54
12	64	64	64	64	123	88
14	90	90	90	105	140	114
16	106	98	98	140	180	140
18	130	130	130	160	220	165
20	165	165	165	195	285	197
22	185	185	185	245	355	225
24	220	220	220	275	430	268

Measurement Of DIN 2527 EN 1092 1 Flanges

O For Outside Diameter of flange
C For Thickness of flange
R For Diameter of raised face
Q For (Minimum) diameter of bolt circle
X For Hub Diameter at base
Y For Length through hub
T For (Minimum) thread length

Din 2527 Flange Types

Din 2527 Pn16 Flange

Din 2527 Blind Flange

Din 2527 Pn6 Flange

Din 2527 Pn16 Blind Flange

Din 2527 Pn40 Flange

Din 2527 Pn16-Pn6 Flange

Blind Flange DIN 2527 PN10 Material Specification

Specification	DIN 2527 Flange
Flanges Face Types	(1) FF (Flat Face), (2) RTJ (Ring type joint), (3) RF (Raised face)
Type Of DIN 2527 Flange	Blind Flange
Size List	1/2" To 24" (Inche)
Forging Materials	Nickel Alloys, Super Duplex, Duplex Steel, Tantalum, Bronze, Incoloy, Alloy 20, Titanium, Hastalloy, Monel, Carbon Steel, Inconel, Alloy Steel, Cupro-Nickel, Copper, Stainless Steel, Brass.
Thickness Size	SCH 20S/ SCH 40/ SCH 80/ SCH 100/ SCH 120/ SCH 140
Dimensions	DIN 2527 Flange
Pressure Class	Class 150/ Class 300/ Class 600/ Class 900/ Class 1500/ Class 2500

DIN 2527 Flanges Size Length

Nominal Size Of Pipe		Type Of Flanges	(Ø A)	(D)	Liner Wall Thickness
(DN1)	(DN2)	Type Of Flanges	(Ø A)	(D)	Liner Wall Thickness
Inches	Inches		Millimeter	Millimeter	Millimeter
3/4"	1/2"	1	98.5	30	5.0
1"	1/2"	1	108	30	5.0
1"	3/4"	1	108	30	5.0
1.1/2"	1/2"	1	127	30	5.0
1.1/2"	3/4"	1	127	30	5.0
1.1/2"	1"	1	127	30	5.0
2"	1/2"	3	152	30	5.0
2"	3/4"	2	152	30	5.0
2"	1"	2	152	30	5.0
2"	1.1/2"	1	152	30	5.0
3"	3/4"	3	190.5	35	5.0
3"	1"	3	190.5	35	5.0
3"	1.1/2"	2	190.5	35	5.0
3"	2"	1	190.5	35	5.0
4"	3/4"	3	228.6	35	5.0
4"	1"	3	228.6	35	5.0
4"	1.1/2"	3	228.6	35	5.0
4"	2"	3	228.6	35	5.0
4"	3"	2	228.6	35	5.0
6"	3/4"	3	280	40	5.0
6"	1"	3	280	40	5.0
6"	1.1/2"	3	280	40	5.0
6"	2"	3	280	40	5.0
6"	3"	3	280	40	5.0
6"	4"	2	280	40	5.0
8"	1"	3	343	35	5.0
8"	1.1/2"	3	343	35	5.0
8"	2"	3	343	40	5.0
8"	3"	3	343	40	5.0
8"	4"	3	343	40	5.0
8"	6"	2	343	40	5.0
10"	1"	3	406	35	2.5
10"	1.1/2"	3	406	35	2.5
10"	2"	3	406	35	2.5
10"	3"	3	406	35	2.5
10"	4"	3	406	35	2.5
10"	6"	3	406	35	2.5
10"	8"	2	406	35	3.5
12"	1"	3	483	35	3.5
12"	1.1/2"	3	483	35	3.5
12"	2"	3	483	35	3.5
12"	3"	3	483	35	3.5
12"	4"	3	483	35	3.5
12"	6"	3	483	35	3.5
12"	8"	3	483	35	3.5
12"	10"	2	483	35	3.5
14"	12"	1	533	40	3.5
16"	12"	3	597	40	3.5
16"	14"	2	597	35	3.5

Tolerance Chart Of DIN 2527 PN16 Flange

DIN 2527 Flange	Type Of Daimeter	Tolerance
(A)	(O.D.) For Outside Diameter	When Outside Diameter is 24 Inch or less: ±1/16" (1.6 millimeter) When Outside Diameter is over 24": ±1/8" (3.2 millimeter)
(D)	(I.D.) For Inside Diameter	10 Inch and smaller: ±1/32" (0.8 in millimeter) 12 Inch thru 18": +1/8" (3.2 in millimeter) 20 Inch and larger: -1/16" (1.6 in millimeter)
(B)	Contact Face	1/16" (RF): ±1/32" (0.8 millimeter) 1/4" (RF), Tongue & Groove (male & female): ±1/64" (0.4 millimeter)
(J)	Hub At Base Daimeter	When hub base is 24 inch or smaller: ±1/16" (1.6 millimeter) When hub base is over 24": ±1/8" (3.2 mm)
(H)	Diameter of hub at point of welding	5 inch and smaller: +3/32" (2.4 mm), -1/32" (0.8 mm) 6 inch and larger: +5/32" (4.0 mm), -1/32 (0.8 mm)
(P)	Drilling	Bolt circle (BC): ±1/16" (1.6 mill.) Bolt hole (BH) spacing: ±1/32" (0.8 mill.)
	Eccentricity of bolt circle (bc) with respect to facing	2 1/2" and smaller ±1/32" (0.8 mm) maximum 3" and larger ±1/16" (1.6 mm) maximum
(C)	Wall Thickness	18 inch and smaller: ±1/8" (3.2 mill.), -0" 20 inch and larger: ±3/16" (4.8 mill.), -0"
(K)	hub Length	10 Inch and smaller: ±1/16" (1.6 mm) 12 Inch and larger: ±1/8" (3.2 mm)

Price List Of DIN 2527 Flange

Type Of Flanges	Size	SCH	Class	Material	Price In INR (India) Per Piece
DIN 2527 Blind Flange	3/4"	SCH 40	300	Carbon Steel	187.00
Blind	1”	SCH 40	300	-	299.00
Blind	1-1/2”	SCH 40	300		359.00
Blind	2"	SCH 40	300	Carbon Steel	576.00

One Stop Shop For All DIN 2527 Flange In India. For final Din 2527 Pn16 Blind Flange Price List Please Call on +91-9987870874 or drop an Email to info@fastwell.in.

Bolt Torque DIN 2527 Steel Flanges

Flanges Size in (Inches)	Flanges Size in (Millimeter)	Radial Projection (Maximum)
Flanges Size in (Inches)	Flanges Size in (Millimeter)	No Deeper Than the Bottom In MM	Deeper Than the Bottom In MM
1/2	15	3.0	1.5
3/4	20	3.0	1.5
1	25	3.0	1.5
1 1/4	32	3.0	1.5
1 1/2	40	3.0	1.5
2	50	3.0	1.5
2 1/2	65	3.0	1.5
3	80	4.5	1.5
3 1/2	90	6.0	3.0
4	100	6.0	3.0
5	125	6.0	3.0
6	150	6.0	3.0
8	200	8.0	4.5
10	250	8.0	4.5
12	300	8.0	4.5
14	350	8.0	4.5
16	400	10.0	4.5
18	450	12.0	6.0
20	500	12.0	6.0
24	600	12.0	6.0