Elbows are used to change the direction of pipes in a piping system. They are made up of different alloys and metals depending upon the application that they are going to be used in. ASTM A234 WPB Elbow is one such type of elbow that is made from A234 grade that belongs to wrought carbon steel and alloy steel suitable for high to moderate temperatures. As per SA234 WPB Elbow manufacturer In India, these elbows are bifurcated into 2 categories that measure the distance from the center when they change directions. Grade A234 WPB Pipe Bend is available in welded and seamless type.
The Carbon Steel Elbow 90 Deg A234 WPB as well as the ones made up of steel alloy are used in pressure vessel fabrication and pressure pipelines. They are used in industries to change the direction of the flow or to change the rate of flow of the media. These elbows are available at an angle of 22.5 degrees, 45 degrees, and 90 degrees. WPB 45/ 90 Degree Long Radius Elbow can be surface treated or coated with oil black paint, yellow transparent, anti-rust paint, hot and cold dip galvanized, or zinc plated. If required we at Fastwell also customize the angle of these elbows as per the specific requirements of the customer.
A234 WPB Carbon Steel Buttweld 180 Deg Elbow is widely used in the natural gas industry, oil and gas industry, fabrication industry, nuclear power plant, chemical industry, and water pipeline industry. Moreover, they are also used in water treatment facilities, apart from being used in water supply lines. ASME A234 Short Radius Elbows are preferred in high pressure applications where the pressure needs to be reduced. The weight of the fittings also depends upon the material diameter and length of the fitting. They are available in the size range of ½ inch to 48 inch nominal size.
Table Of Content:
A234 WPB Elbow Dimensions
| Normal Size Of Pipe | Outside Dai Of (D) | 90 degree (Long Radius) Center-to-End (A) |
45 degree (Long Radius) Center-to-End (B) |
90 degree (3D) Center-to-End (A) |
45 degree (3D) Center-to-End (B) |
| 1/2 | 21.3 | 38 | 16 | – | – |
| 3/4 | 26.7 | 38 | 19 | 57 | 24 |
| 1 | 33.4 | 38 | 22 | 76 | 31 |
| 1¼ | 42.2 | 48 | 25 | 95 | 39 |
| 1½ | 48.3 | 57 | 29 | 114 | 47 |
| 2 | 60.3 | 76 | 35 | 152 | 63 |
| 2½ | 73 | 95 | 44 | 190 | 79 |
| 3 | 88.9 | 114 | 51 | 229 | 95 |
| 3½ | 101.6 | 133 | 57 | 267 | 111 |
| 4 | 114.3 | 152 | 64 | 305 | 127 |
| 5 | 141.3 | 190 | 79 | 381 | 157 |
| 6 | 168.3 | 229 | 95 | 457 | 189 |
| 8 | 219.1 | 305 | 127 | 610 | 252 |
| 10 | 273 | 381 | 159 | 762 | 316 |
| 12 | 323.8 | 457 | 190 | 914 | 378 |
| 14 | 355.6 | 533 | 222 | 1067 | 441 |
| 16 | 406.4 | 610 | 254 | 1219 | 505 |
| 18 | 457 | 686 | 286 | 1372 | 568 |
| 20 | 508 | 762 | 318 | 1524 | 632 |
| 22 | 559 | 838 | 343 | 1676 | 694 |
| 24 | 610 | 914 | 381 | 1829 | 757 |
| 26 | 660 | 991 | 406 | 1981 | 821 |
| 28 | 711 | 1067 | 438 | 2134 | 883 |
| 30 | 762 | 1143 | 470 | 2286 | 964 |
| 32 | 813 | 1219 | 502 | 2438 | 1010 |
| 34 | 864 | 1295 | 533 | 2591 | 1073 |
| 36 | 914 | 1372 | 565 | 2743 | 1135 |
| 38 | 965 | 1448 | 600 | 2896 | 1200 |
| 40 | 1016 | 1524 | 632 | 3048 | 1264 |
| 42 | 1067 | 1600 | 660 | 3200 | 1326 |
| 44 | 1118 | 1676 | 695 | 3353 | 1389 |
| 46 | 1168 | 1753 | 727 | 3505 | 1453 |
| 48 | 1219 | 1829 | 759 | 3658 | 1516 |
ASTM A234 WPB Specification PDF
| Specification List Of | ASTM A234 WPB Elbow |
|---|---|
| Dimensions & Standard | EN 10253-2/ EN 10253-4/ JIS B2312/ JIS B2313/ MSS SP-75/ BS 4825 |
| Size Length | NPS 1⁄₂" To NPS 48” |
| WPB Elbows Applications | Elbows Connected Between Two Pipes |
| Pressure Class | Class 150/ Class 300/ Class 600 |
| We Manufacturer Of Below Elbows Schedule | SCH 5S/ SCH 10/ SCH 40/ SCH 80/ SCH 120/ SCH 160/ SCH 180 To XXS |
| ASTM A234 WPB Reducing Elbow Use | Change Fluid Direction By 90 Degree |
| Type Of Buttweld Elbow | 45 Degree/ 90 Degree/ 180 Degree/ Long Radius & Short Radius/ 1D/ 1.5D/ 3D/ 5D. |
| Elbow Methods Type | ButtWeld/ Welded/ Seamless |
(45 Deg) A234 WPB Elbow Price
| Type Of Fittings | Size | SCH | Material | Price In INR (India) Per Piece |
|---|---|---|---|---|
| 45 Deg Elbows | 3/4" | SCH 40 | ASTM A234 WPB | 67.00 |
| 45 Deg Elbows | 1" | SCH 40 | 137.00 | |
| 45 Deg Elbows | 2" | SCH 40 | 198.00 | |
| 45 Deg Elbows | 3" | SCH 40 | 237.00 | |
| 45 Deg Elbows | 4" | SCH 40 | 299.00 |
ISO Certified Manufacturer Of SA234 WPB Elbow Manufacturer In India. For final ASTM A234 WPB Elbow Price List Please Call on +91-9987870874 or drop an Email to info@fastwell.in.
SA234 WPB 90 Deg Elbow Price List
| Type Of Fittings | Size | SCH | Material | Price In INR (India) Per Piece |
|---|---|---|---|---|
| 90 Deg Elbows | 3/4" | SCH 40 | ASTM A234 WPB | 126.00 |
| 90 Deg Elbows | 1" | SCH 40 | - | 200.00 |
| 90 Deg Elbows | 2" | SCH 40 | - | 236.00 |
| 90 Deg Elbows | 3" | SCH 40 | - | 326.00 |
| 90 Deg Elbows | 4" | SCH 40 | - | 428.00 |
| 90 Deg Elbows | 5" | SCH 40 | - | 538.00 |
| 90 Deg Elbows | 6" | SCH 40 | - | 631.00 |
| 90 Deg Elbows | 8" | SCH 40 | - | 857.00 |
| 90 Deg Elbow | 10" | SCH 40 | - | 948.00 |
| 90 Deg Elbow | 12" | SCH 40 | - | 1236.00 |
| 90 Deg Elbow | 14" | SCH 40 | ASTM A234 WPB | 1563.00 |
Trusted Manufacturer Of ASTM A234 WPB Elbow In India. For final A234 WPB Elbow Price List Please Call on +91-9987870874 or drop an Email to info@fastwell.in.
Elbow 90 A234 WPB Dimensions Chart
| Sizes In (Inches) | ND | Sizes In (Millimeter) | Center-center | Type Of Radius | Center-end | Back-face |
| (D) | (O) | (A) | (B) | (K) | ||
| 1/2 | 15 | 21,34 | 76,20 | 38,10 | 15,87 | 47,62 |
| 3/4 | 20 | 26,67 | 57,15 | 28,57 | 11,11 | 42,86 |
| 1 | 25 | 33,40 | 76,20 | 38,10 | 22,22 | 55,56 |
| 1 1/4 | 32 | 42,16 | 95,25 | 47,60 | 25,40 | 69,85 |
| 1 1/2 | 40 | 48,26 | 114,30 | 57,15 | 28,57 | 82,55 |
| 2 | 50 | 60,32 | 152,40 | 76,20 | 34,92 | 106,40 |
| 2 1/2 | 65 | 73,02 | 190,50 | 95,25 | 44,45 | 131,80 |
| 3 | 80 | 88,90 | 228,60 | 114,30 | 50,80 | 158,75 |
| 3 1/2 | 90 | 101,60 | 266,70 | 133,35 | 57,15 | 184,15 |
| 4 | 100 | 114,30 | 304,80 | 152,40 | 63,50 | 209,55 |
| 5 | 125 | 141,30 | 381,00 | 190,50 | 79,38 | 261,90 |
| 6 | 150 | 168,27 | 457,20 | 228,60 | 95,25 | 312,70 |
| 8 | 200 | 219,07 | 609,60 | 304,80 | 127,00 | 414,30 |
| 10 | 250 | 273,05 | 762,00 | 381,00 | 158,75 | 517,50 |
| 12 | 300 | 323,85 | 914,40 | 457,20 | 190,50 | 619,10 |
| 14 | 350 | 355,60 | 1066,80 | 533,40 | 222,25 | 711,20 |
| 16 | 400 | 406,40 | 1219,20 | 609,60 | 254,00 | 812,80 |
| 18 | 450 | 457,20 | 1371,60 | 685,80 | 285,74 | 914,40 |
| 20 | 500 | 508,00 | 1524,00 | 762,00 | 317,50 | 1016,00 |
| 22 | 550 | 558,80 | 1676,40 | 838,20 | 342,90 | 1117,60 |
| 24 | 600 | 609,60 | 1828,80 | 914,40 | 381,00 | 1219,20 |
| 28 | 700 | 711,20 | 2133,60 | 1066,80 | 441,90 | 1422,40 |
Dimensions Of SA234 WPB 180 Deg Elbow
| NPS (Normal Pipe Size) Of A234 180 Elbow | O.D. Of (D) |
Long Radius ( LR 180 Deg) | Short Radius (SR 180 Deg) | ||
| Center- Center (O) |
Back- Face (K) |
Center- Center (O) |
Back- Face (K) |
||
| 1/2 | 21.3 | 76 | 48 | … | … |
| 3/4 | 26.7 | 76 | 51 | … | … |
| 1 | 33.4 | 76 | 56 | 51 | 41 |
| 1.1/4 | 42.2 | 95 | 70 | 64 | 52 |
| 1.1/2 | 48.3 | 114 | 83 | 76 | 62 |
| 2 | 60.3 | 152 | 106 | 102 | 81 |
| 2.1/2 | 73 | 190 | 132 | 127 | 100 |
| 3 | 88.9 | 229 | 159 | 152 | 121 |
| 3.1/2 | 101.6 | 267 | 184 | 178 | 140 |
| 4 | 114.3 | 305 | 210 | 203 | 159 |
| 5 | 141.3 | 381 | 262 | 254 | 197 |
| 6 | 168.3 | 457 | 313 | 305 | 237 |
| 8 | 219.1 | 610 | 414 | 406 | 313 |
| 10 | 273 | 762 | 518 | 508 | 391 |
| 12 | 323.8 | 914 | 619 | 610 | 467 |
| 14 | 355.6 | 1067 | 711 | 711 | 533 |
| 16 | 406.4 | 1219 | 813 | 813 | 610 |
| 18 | 457 | 1372 | 914 | 914 | 686 |
| 20 | 508 | 1524 | 1016 | 1016 | 762 |
| 22 | 559 | 1676 | 1118 | 1118 | 838 |
| 24 | 610 | 1829 | 1219 | 1219 | 914 |
ASTM A234 WPB Elbow Weight Chart
| NPS For Elbow | Weight In LBS | Weight In KG |
| 1/2 | 0.09 | 0.04 |
| 3/4 | 0.09 | 0.04 |
| 1 | 0.25 | 0.11 |
| 1.1/4 | 0.38 | 0.17 |
| 1.1/2 | 0.4 | 0.18 |
| 2 | 0.81 | 0.37 |
| 2.1/2 | 1.75 | 0.79 |
| 3 | 2.63 | 1.19 |
| 3.1/2 | 3.5 | 1.59 |
| 4 | 4.5 | 2.04 |
| 5 | 7.5 | 3.4 |
| 6 | 12 | 5.44 |
| 8 | 23 | 10.43 |
| 10 | 43 | 19.5 |
| 12 | 62 | 28.12 |
| 14 | 80 | 36.29 |
| 16 | 100 | 45.36 |
| 18 | 126 | 57.15 |
| 20 | 160 | 72.57 |
| 22 | 197 | 89.36 |
| 24 | 238 | 107.95 |
| 26 | 275 | 124.74 |
| 30 | 367 | 166.47 |
| 36 | 531 | 240.86 |
ASME B16.9 A234 WPB Schedule 80 Elbow Application For Oil And Gas Industry
A234 Elbow Pressure Rating
| Pressure ratings (psig) | |||||
|---|---|---|---|---|---|
| Temperature Ratings | Type Of Pressure Class | ||||
| 150 LBS | 300 LBS | ||||
| 1/4 - 1 Inches | 1 1/4 - 2 Inches | 2 1/2 - 3 Inches | |||
| (oF) | (oC) | ||||
| -20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
| 200 | 93 | 265 | 1785 | 1350 | 910 |
| 250 | 121 | 225 | 1575 | 1200 | 825 |
| 300 | 149 | 185 | 1360 | 1050 | 735 |
| 350 | 177 | 150 | 1150 | 900 | 650 |
| 400 | 204 | - | 935 | 750 | 560 |
| 450 | 232 | - | 725 | 600 | 475 |
| 500 | 260 | - | 510 | 450 | 385 |
| 550 | 288 | - | 300 | 300 | 300 |
How To Find The Center Of WPB Elbow?
Tensile Strength Of 3 Inch To 8 Inch A234 WPB SR 90 Deg Elbow
| Tensile Strength, minimum | |
|---|---|
| ksi | MPa |
| 60 | 415 |
A234 WPB Elbow Size Chart
| NPS (Normal Pipe Size) | Outside Daimeter (O.D.) (D) |
90 Deg Long Radius Center to End (A) |
45 Deg Long Radius Center to End (B) |
90 Deg 3D Center to End (A) |
45 Deg 3D Center to End (B) |
| 1/2 | 21.3 | 38 | 16 | ||
| 3/4 | 26.7 | 38 | 19 | 57 | 24 |
| 1 | 33.4 | 38 | 22 | 76 | 31 |
| 1¼ | 42.2 | 48 | 25 | 95 | 39 |
| 1½ | 48.3 | 57 | 29 | 114 | 47 |
| 2 | 60.3 | 76 | 35 | 152 | 63 |
| 2½ | 73 | 95 | 44 | 190 | 79 |
| 3 | 88.9 | 114 | 51 | 229 | 95 |
| 3½ | 101.6 | 133 | 57 | 267 | 111 |
| 4 | 114.3 | 152 | 64 | 305 | 127 |
| 5 | 141.3 | 190 | 79 | 381 | 157 |
| 6 | 168.3 | 229 | 95 | 457 | 189 |
| 8 | 219.1 | 305 | 127 | 610 | 252 |
| 10 | 273 | 381 | 159 | 762 | 316 |
| 12 | 323.8 | 457 | 190 | 914 | 378 |
| 14 | 355.6 | 533 | 222 | 1067 | 441 |
| 16 | 406.4 | 610 | 254 | 1219 | 505 |
Our Materials Are Delivered To The Following Countries:
ASTM A234 Wpb Elbows
Kuwait, Brazil, South Africa, Saudi Arabia (KSA)
SA234 Wpb Elbows
Australia, Turkey, Nigeria, Egypt, UK, Belgium
Elbow 90 A234 Wpb
Mexico, Hong Kong, Oman, Spain, Poland, Japan
Grade A234 Wpb Pipe Bend
Singapore, Canada, Italy, Iran, Chile, China
A234 Wpb Carbon Steel 45 Deg Elbows
Malaysia, Europe, United Kingdom -UK, UAE
A234 Wpb Buttweld 180 Deg Elbows
Indonesia, Dammam -KSA, Philippines
ASME A234 Short Radius Elbows
Thailand, Qatar, France, Europe
Wpb Elbows
Bangladesh, Germany, USA, Finland
SA234 WPB Pipe Elbow Standards
WPB A234 Elbow Dimensional Tolerance
| Tolerance Of ASTM A234 WPB Elbow | |||||||
| All Type Of Buttweld Fittings | 45 deg & 90 deg elbows | 180 Degree Returns | |||||
| Normal Size Of Pipe (NPS) | O.D. (Outside Daimeter) at Bevel |
Inside Daimeter (I.D.) at End |
Wall Thickness For (WT) t / t1 |
Center-End Daimeter A-B-C-M | Center-Center Daimeter (O) |
Back-Face Daimeter (K) |
Align- ment of Ends (U) |
| 1/2 a 2 1/2 | 1 | 0,8 | Not | 2 | 7 | 7 | 1 |
| 3 a 3 1/2 | 1 | 1,6 | less | 2 | 7 | 7 | 1 |
| 4 | +2 -1 | 1,6 | than | 2 | 7 | 7 | 1 |
| 5 a 6 | +3 -1 | 1,6 | 87,50% | 2 | 7 | 7 | 1 |
| 8 | 2 | 1,6 | of nominal | 2 | 7 | 7 | 1 |
| 10 | +4 -3 | 3,2 | tickness | 2 | 7 | 7 | 2 |
| 12 a 18 | +4 -3 | 3,2 | 3 | 10 | 7 | 2 | |
| 20 a 24 | +6 -5 | 4,8 | 3 | 10 | 7 | 2 | |
| 26 a 30 | +7 -5 | 4,8 | 3 | - | - | - | - |
| 32 a 48 | +7 -5 | 4,8 | 5 | - | - | - | - |
Test Certificates
Value Added Services
Documentation
ASTM A234 WPB Short Radius Elbow Dimensions With Size
| NPS Of SW Elbows | O.D. Of (D) |
Short Radius 45 Deg Center-to-End (A) |
Short Radius 45 Deg 3D Center-to-End (A) |
| 1/2 | 21.3 | 38 | - |
| 3/4 | 26.7 | 38 | 57 |
| 1 | 33.4 | 38 | 76 |
| 1¼ | 42.2 | 48 | 95 |
| 1½ | 48.3 | 57 | 114 |
| 2 | 60.3 | 76 | 152 |
| 2½ | 73 | 95 | 190 |
| 3 | 88.9 | 114 | 229 |
| 3½ | 101.6 | 133 | 267 |
| 4 | 114.3 | 152 | 305 |
| 5 | 141.3 | 190 | 381 |
| 6 | 168.3 | 229 | 457 |
| 8 | 219.1 | 305 | 610 |
| 10 | 273 | 381 | 762 |
| 12 | 323.8 | 457 | 914 |
| 14 | 355.6 | 533 | 1067 |
| 16 | 406.4 | 610 | 1219 |
| 18 | 457 | 686 | 1372 |
| 20 | 508 | 762 | 1524 |
| 22 | 559 | 838 | 1676 |
| 24 | 610 | 914 | 1829 |
| 26 | 660 | 991 | 1981 |
| 28 | 711 | 1067 | 2134 |
| 30 | 762 | 1143 | 2286 |
| 32 | 813 | 1219 | 2438 |
| 34 | 864 | 1295 | 2591 |
| 36 | 914 | 1372 | 2743 |
| 38 | 965 | 1448 | 2896 |
| 40 | 1016 | 1524 | 3048 |
| 42 | 1067 | 1600 | 3200 |
| 44 | 1118 | 1676 | 3353 |
| 46 | 1168 | 1753 | 3505 |
| 48 | 1219 | 1829 | 3658 |
WPB Long Radius Elbow Dimensions In MM
| NPS Of LR Elbows | O.D. Of (D) |
Long Radius (45 deg) Center-to-End (A) |
Long Radius (45 deg) 3D Center-to-End (A) |
| 1/2 | 21.3 | 38 | - |
| 3/4 | 26.7 | 38 | 57 |
| 1 | 33.4 | 38 | 76 |
| 1¼ | 42.2 | 48 | 95 |
| 1½ | 48.3 | 57 | 114 |
| 2 | 60.3 | 76 | 152 |
| 2½ | 73 | 95 | 190 |
| 3 | 88.9 | 114 | 229 |
| 3½ | 101.6 | 133 | 267 |
| 4 | 114.3 | 152 | 305 |
| 5 | 141.3 | 190 | 381 |
| 6 | 168.3 | 229 | 457 |
| 8 | 219.1 | 305 | 610 |
| 10 | 273 | 381 | 762 |
| 12 | 323.8 | 457 | 914 |
| 14 | 355.6 | 533 | 1067 |
| 16 | 406.4 | 610 | 1219 |
| 18 | 457 | 686 | 1372 |
| 20 | 508 | 762 | 1524 |
| 22 | 559 | 838 | 1676 |
| 24 | 610 | 914 | 1829 |
| 26 | 660 | 991 | 1981 |
| 28 | 711 | 1067 | 2134 |
| 30 | 762 | 1143 | 2286 |
| 32 | 813 | 1219 | 2438 |
| 34 | 864 | 1295 | 2591 |
| 36 | 914 | 1372 | 2743 |
| 38 | 965 | 1448 | 2896 |
| 40 | 1016 | 1524 | 3048 |
| 42 | 1067 | 1600 | 3200 |
| 44 | 1118 | 1676 | 3353 |
| 46 | 1168 | 1753 | 3505 |
| 48 | 1219 | 1829 | 3658 |
Cutting Formula Of SA234 WPB Elbow
Check Our A234 WPB Carbon Steel Elbow Marking Formula
ASTM A234 WPB Elbow Marking includes ANSI Or ASME/ ASA Code
How Do You Calculate A SA234 WPB Elbow Center?
A234 WPB 1.5 D Elbow Dimensions
| I.D. (Inside Daimeter) | Wall Thickness | Centreline | Weight In Inches |
Diameter |
Thickness |
Radius |
Per Piece |
('A') mm |
('B') mm |
('C') mm |
kilos |
| 15 | 1.50 | 30 | 0.03 |
| 20 | 1.50 | 35 | 0.04 |
| 25 | 1.50 | 32.5 | 0.06 |
| 32 | 1.50 | 45 | 0.11 |
| 40 | 1.50 | 60 | 0.20 |
| 50 | 2.00 | 73 | 0.31 |
| 65 | 2.00 | 95 | 0.52 |
| 80 | 2.00 | 123 | 0.77 |
| 100 | 2.00 | 150 | 1.20 |
| 100 | 3.00 | 150 | 1.79 |
| 125 | 2.00 | 188 | 1.88 |
| 150 | 2.00 | 225 | 2.69 |
| 150 | 3.00 | 225 | 4.09 |
Grade A234 WPB 3D Elbow Dimensions
| NPS Of 3D Elbow | O.D. (Outside Daimeter) | (A) | (B) |
| 3/4 | 26.7 | 57 | 24 |
| 1 | 33.4 | 76 | 31 |
| 1-1/4 | 42.2 | 95 | 39 |
| 1-1/2 | 48.3 | 114 | 47 |
| 2 | 60.3 | 152 | 63 |
| 2-1/2 | 73.0 | 190 | 79 |
| 3 | 88.9 | 229 | 95 |
| 3-1/2 | 101.6 | 267 | 111 |
| 4 | 114.3 | 305 | 127 |
| 5 | 141.3 | 381 | 157 |
| 6 | 168.3 | 457 | 189 |
| 8 | 219.1 | 610 | 252 |
| 10 | 273.0 | 762 | 316 |
| 12 | 323.8 | 914 | 378 |
| 14 | 355.6 | 1067 | 441 |
| NPS | OD | A | B |
| 16 | 406.4 | 1219 | 505 |
| 18 | 457.0 | 1372 | 568 |
| 20 | 508.0 | 1524 | 632 |
| 22 | 559.0 | 1676 | 694 |
| 24 | 610.0 | 1829 | 757 |
| 26 | 660.0 | 1981 | 821 |
| 28 | 711.0 | 2134 | 883 |
| 30 | 762.0 | 2286 | 964 |
| 32 | 813.0 | 2438 | 1010 |
| 34 | 864.0 | 2591 | 1073 |
| 36 | 914.0 | 2743 | 1135 |
| 38 | 965.0 | 2896 | 1200 |
| 40 | 1016.0 | 3048 | 1264 |
| 42 | 1067.0 | 3200 | 1326 |
| 44 | 1118.0 | 3353 | 1389 |
Packaging Of A234 WPB Buttweld Elbow


Types Of ASTM A234 WPB Elbow
ASTM A234 WPB Elbows
A234 WPB Carbon Steel Elbows
SA234 WPB Elbows
ASTM A234 WPB Buttweld 45 Deg Elbows
Grade A234 WPB 90 Degree Elbows
ASTM A234 WPB Buttweld Elbows
SA234 WPB Short Radius Elbows
SA 234 180 Degree Elbows
Elbow A234 WPB
A234 WPC SCH 80 Elbows
Sch 10S, 10 Inch, A234 Pipe Elbows
A234 WPB SR 90 Degree Elbows
Street Elbow A234 WPC
45 Deg Street Elbow A234 WPC
SA234 WPC Carbon Steel Elbows
Carbon Steel A234 WPC Elbows
How To Cut Elbow Grade WPB From Pipe?
Chemical Compatibility Of Jual Elbow A234WPB
| Element | Content, % |
| Sulfur [S] | ≤0.058 |
| Silicon [Si] | ≥0.10 |
| Carbon [C] | ≤0.30 |
| Manganese [Mn] | 0.29-1.06 |
| Phosphorus [P] | ≤0.050 |
| Copper [Cu] | ≤0.40 |
| Vanadium [V] | ≤0.08 |
| Chromium [Cr] | ≤0.40 |
| Molybdenum [Mo] | ≤0.15 |
| Nickel [Ni] | ≤0.40 |
Mechanical Strength Of A234 Pipe Elbow
| ASTM A234 Grades | Tensile Strength, (minimum) | Yield Strength, (minimum) | Elongation %, (minimum) | |||
| ksi | MPa | ksi | MPa | Longitudinal | Transverse | |
| WPB | 60 | 415 | 35 | 240 | 22 | 14 |
Yield Strength Of Carbon Steel SA234 WPB Elbow
| Yield Strength, (minimum) | |
|---|---|
| ksi | MPa |
| 35 | 240 |
Material
Our Products
Get In Touch
+91-9987870874
info@fastwell.in
Shop No. 17/B1, Ground Floor Abbas Bldg. Wing A, Jalbhai Street, Near Cama Baug Khetwadi, Grant Road (E) Mumbai – 400004. India
