Looking To Buy Stainless Steel Pipe Cap Manufacturer? Contact Fastwell For Buy ANSI B16.9 Buttweld End Caps At Factory Price In India


ASME B16.9 Cap


There are various fittings used to seal an open end of the pipe. From valves, flanges to caps. ASME B16.9 Cap is a grade of cap that is used to seal an open end of a pipe. The Din 2617 Cap may or may not be included while calculating the running length of the pipe. It acts as a protective device thus protecting the pipe ends.Carbon Steel End Cap manufacturers In India recommend these caps as a piping header for future connections. 

Steel Pipe End Caps offer high mechanical strength and increased corrosion resistance properties when compared to any other carbon or alloy caps. Seamless Pipe End Cap is made up of a single billet and does not have welded area that might weaken it. The main function of  Caps Steel Pipe End is to fit into the pipe and provide some gaps for the air blocks. Cap ANSI B16-9 is available in different grades and classes and the price ranges from Rs. 855 to Rs. 2140.

Galvanized Pipe End Caps provide resistance to salts and corrosion. Meanwhile, Aluminium End Caps are said to be light in weight yet can handle high pressure. EN 10253 End Cap manufactured by us is passed through various tests by our team of professionals. This ensures that 4 Inch Pipe Caps have retained the properties of base metal. An exhaust Pipe End Cap is used to boost the health of the exhaust system of a vehicle.




What Is Pipe End Caps?


Stainless Steel Pipe Cap is primarily used to provide a leak-free and waterproof connection. ANSI B16.9 Buttweld End Caps are also used to seal or close the ends of the hydraulic or pneumatic piping systems.


Caps Are Used To Close Female Pipe Openings?


2 Inch Pipe Cap that is made using brass as their base metal can be used to carry flammable gases and liquids. Whereas, 20 Inch Pipe End Cap that is made up of carbon steel is highly in demand in the cement and paper industries.


Difference Between Pipe Plug And Cap?


Pipe Plug : The Stainless Steel plug is standard equipment used in a pipeline. It is used to close the pipe openings during repairs.
Pipe Cap :ASME B16.9 Pipe Cap is used to shut plumbing systems of commercial and residential water supply lines.


Dimensions Of Carbon Steel End Cap, Check Steel Pipe End Caps Machine For Buy, Seamless Pipe End Cap Weight Chart According to ASME B16.9


ASME B16.9 Cap Dimensions


ASME B16.9 Cap Dimensions
NPS Of Pipes Caps O.D. (Outside Daimeter) Of
D
Length Of
(H)
Length Of
(H1)
1/2 21.3 25 25
3/4 26.7 25 25
1 33.4 38 38
1.1/4 42.2 38 38
1.1/2 48.3 38 38
2 60.3 38 44
2.1/2 73 38 51
3 88.9 51 64
3.1/2 101.6 64 76
4 114.3 64 76
5 141.3 76 89
6 168.3 89 102
8 219.1 102 127
10 273 127 152
12 323.8 152 178
14 355.6 165 191
16 406.4 178 203
18 457 203 229
20 508 229 254
22 559 254 254
24 610 267 305
26 660 267
28 711 267
30 762 267
32 813 267
34 864 237
36 914 267
38 965 305
40 1016 305
42 1067 305
44 1118 343
46 1168 343
48 1219 343

Pipe End Cap Weight Calculation


NPS Of Pipes End Caps (STD) XS Size 160 SCH (XXS)
1 0.09 0.14 0.18 0.23
1.1/4 0.14 0.18 0.23 0.34
1.1/2 0.18 0.23 0.27 0.41
2 0.27 0.34 0.57 0.68
2.1/2 0.41 0.45 0.79 1.13
3 0.68 0.79 1.32 1.81
3.1/2 0.91 1.13 2.72
4 1.13 1.36 2.68 3.4
5 2.04 2.49 4.54 5.44
6 2.95 4.08 6.8 8.16
8 5.44 7.26 14.06 13.61
10 9.07 11.34 25.85
12 13.61 16.33 43.09
14 16.33 20.41
16 18.14 24.49
18 24.49 32.66
20 34.02 39.01
22 42.64 56.7
24 43.54 58.97
26 53.98 72.12
30 78.02 103.87


Recently Supplied To Following Locations:


Malaysia, United Kingdom -UK, Europe, UAE

ASME B16.9 Caps

United Kingdom -UK, UAE, Europe, Malaysia

Philippines, Indonesia, Dammam -KSA,

Aluminium End Caps

Indonesia, Philippines, Dammam -KSA

Qatar, Europe, Thailand, France

Copper Pipe End Caps

Europe, Qatar, Thailand, France

Bangladesh, Germany, Finland, USA

Galvanized Pipe End Caps

Bangladesh, Finland, Germany, USA

South Africa, Brazil, Saudi Arabia (KSA), Kuwait

B16.9 Buttweld End Caps

Saudi Arabia (KSA), South Africa, Brazil, Kuwait

Australia, Nigeria, Turkey, UK, Belgium, Egypt

Stainless Steel Pipe Caps

Australia, Nigeria, Turkey, UK, Belgium, Egypt

Hong Kong, Spain, Oman, Mexico, Poland, Japan

Carbon Steel End Caps

Hong Kong, Mexico, Oman, Spain, Poland, Japan

Iran, Italy, Chile, Singapore, Canada, China

Seamless End Caps

Singapore, Chile, Iran, Italy, Canada, China


Application

  • Condensers
  • Chemical Equipment
  • Off-Shore Oil Drilling Companies
  • Petrochemicals
  • Gas Processing
  • Pulp and Paper Industry
  • Sea Water Equipment
  • Pharmaceutical Equipment
  • Heat Exchangers
  • Pharmaceuticals
  • Specialty Chemicals
  • Power Generation

Test Certificates

  • Raw Materials Certificate
  • EN 10204/3.1B,
  • Third Party Inspection Repor
  • 100% Radiography Test Report

Value Added Services

  • Hardness Test
  • Chemical Equipment
  • Flattening Test
  • Mechanical Testing Such as Tensile of Area
  • Pitting Resistance Test
  • Positive Material Identification – PMI Testing
  • Micro and MacroTest
  • Chemical Analysis – Spectro Analysis
  • Intergranular Corrosion (IGC) Test

Documentation

  • Fumigation Certificates
  • Guarantee Letter
  • Raw Material Test Reports
  • Fumigation Certificates
  • Heat Treatment Charts
  • Commercial Invoice which includes HS Code
  • QAP (Quality Assurance Plan)
  • NABL approved Laboratory Test Reports

Carbon Steel Pipe Cap Price List


Type Of Pipe Cap Size SCH Price In INR (India) Per Piece Material
Square 1/2" XS 150.00 Carbon Steel
Square 3/4" XS 220.00 --
Square 1" XS 280.00 -
Square 1 1/4" XS 399.00 --
Square 2 1/2" XS 750.00 Carbon Steel

One Of India’s Largest Manufacturer Of ASME B16.9 Cap In India. For final Stainless Steel Pipe Cap Price List Please Call on +91-9987870874 or drop an Email to info@fastwell.in.

Price List Of Pipe Cap

Buttweld End Cap Size Chart


Size In Inches Size In Millimeter Height For (H)
(D) (E)
1/2 15 21,34 25,40
3/4 20 26,67 31,75
  25 33,40 38,10
1 1/4 32 42,16 38,10
1 1/2 40 48,26 38,10
2 50 60,32 38,10
2 1/2 65 73,02 38,10
3 80 88,90 50,80
3 1/2 90 101,60 63,50
4 100 114,30 63,50
5 125 141,30 76,20
6 150 168,27 88,90
8 200 219,07 101,60
10 250 273,05 127,00
12 300 323,85 152,40
14 350 355,60 165,10
16 400 406,40 177,80
18 450 457,20 203,20
20 500 508,00 228,60
22 550 558,80 254,00
24 600 609,60 266,70
28    700 711,20 266,70

Galvanized Pipe End Caps Specification Checklist And DIN 2617 Cap Delivering Everywhere, Largest Supplier Of Caps Steel Pipe End


Galvanized Pipe End Cap Specification Checklist


Spec Chart Of ASME B16.9 Cap
Type Of Buttweld Cap Schedule SCH 20/ SCH 40/ SCH 60/ SCH 80/ SCH 100/ SCH 120/ SCH 160 SCH 180.
Manufacturing Material Cupro-Nickel Inconel, Monel, Hastalloy, Alloy Steel, Brass, Nickel Alloys, Tantalum, Stainless Steel, Incoloy, Alloy 20, Copper, Carbon Steel, Titanium, Bronze, Duplex Steel, Super Duplex.
End Cap Uses ASME B16.9 Cap To Fit Tight So That They Become Gas Tight And Water Tight Depending On The End Application.
Standard Dimensions DIN 2617 And EN 10253-2
End Cap Joint Type Welded & ButtWeld And Seamless
Available Pressure Class 150/ Class 300/ Class 600
Types Of Pipe End Cap Square/ Round/ Rectangular/ “U” Shape/ “I” Shape/ Oval End Caps
Size NPS 1⁄₂" To NPS 48"

Seamless Pipe End Cap Temperature Ratings


ASME B16.9 Cap Pressure ratings (psig)
Pipes Caps Temperature Ratings Type Of Pressure Class
150 LBS 300 LBS
1/4 - 1 Inches 1 1/4 - 2 Inches 2 1/2 - 3 Inches
(oF) (oC)
-20 to 150 -29 to 66 300 2000 1500 1000
200 93 265 1785 1350 910
250 121 225 1575 1200 825
300 149 185 1360 1050 735
350 177 150 1150 900 650
400 204 - 935 750 560
450 232 - 725 600 475
500 260 - 510 450 385
550 288 - 300 300 300

Different Shapes Of ASME B16.9 Pipe Cap


  • Square End Caps
  • Round End Caps
  • Rectangular End Caps
  • “U” Shape End Caps
  • Hemispherical End Caps
  • Oval End Caps

End Cap DIN 2617 Dimensions


End Cap DIN 2617 Dimensions
(Outside Diameter) O.D. Of DIN 2617 End Caps Wall Thick. Height For (H) Weight For (W)
In MM In MM In MM In KG
(D) (S1)
21,3 2,0 25,0 0,060
26,9 2,3 32,0 0,070
33,7 2,6 38,0 0,110
3,2 0,130
42,4 2,6 38,0 0,130
3,6 0,170
48,3 2,6 38,0 0,200
4,0 0,230
60,3 2,9 38,0 0,280
4,5 0,320
76,1 2,9 38,0 0,340
5,0 0,390
88,9 3,2 51,0 0,530
5,6 0,700
108,0 3,6 64,0 1,000
114,3 3,6 64,0 1,000
6,3 1,500
133,0 4,0 76,0 1,600
139,7 4,0 76,0 1,700
6,3 2,500
159,0 4,5 90,0 2,400
168,3 4,5 89,0 2,650
7,1 3,550
219,0 6,3 100,0 5,550
8,0 6,700
273,0 6,3 127,0 8,800
323,9 7,1 152,0 14,000
355,6 8,0 165,0 16,500
406,4 8,8 178,0 18,200
508,0 11,0 229,0 38,000


Check Steel Pipe End Cap Machine For Buy


Check Steel Pipe End Cap Machine For Buy

EN 10253-2 End Cap Dimensions


EN 10253-2 End Cap Dimensions
Size (D) (H)
15 21.3 25
20 26.9 25
25 33.7 38
32 42.4 38
40 48.3 38
50 60.3 38
65 76.1 38
80 88.9 51
101.6 64
100 114.3 64
125 139.7 76
150 168.3 89
200 219.1 102
250 273.1 127
300 323.9 152
350 355.6 165
400 406.4 178
450 457 203
500 508 229
550 559 254
600 610 267
650 660 267

Technical Drawings Of ASME B16.9 Pipe Cap, 4 Inch Pipe Caps Tolerance Chart, Fast Delivery On Exhaust Pipe End Cap

ANSI B16.9 Pipe End Cap Formula


W = Weight of Cap in Kilogram

OD = Outside diameter of caps (millimeter)

E = End to end length of caps (millimeter)

T = Wall Thickness (millimeter)


SS Pipe Cap Price List In India


Size SCH Price In INR (India) Per Piece Material
1/2" SCH 80 273.00 Stainless Steel
3/4" SCH 80 350.00 --
1" SCH 80 635.00 --
1 1/4" SCH 80 450.00 --
2 1/2" SCH 80 1293.00 Stainless Steel

High-Quality ASME B16.9 Cap Manufacturer In India. For final Stainless Steel End Caps Price List Please Call on +91-9987870874 or drop an Email to info@fastwell.in.

Price List Of Pipe Cap

Aluminium End Cap Packaging


pipe end cap packaging
end cap packaging


B16.9 Pipe Cap Marking


ASME B16.9 Cap Marking includes ANSI Or ASME Code

  1. Name of Manufacturer = (Fastwell Engineering)
  2. NPS = (36")
  3. Type = (End Cap)
  4. Schedule = (SCH STD)
  5. Material Designation = (ASTM A234 WPB)
  6. Country Name = (Made In India)
  7. Heat Number = (880A36)
b16 9 pipe cap Marking


Types Of Pipe End Cap


Pipe End Cap

Pipe End Caps

Caps Steel Pipe End

Caps Steel Pipes End

Aluminium End Cap

Aluminium End Caps

Pipe End Cap Fitting

Pipe End Cap Fitting

Exhaust Pipe End Cap

Exhaust Pipe End Caps

Galvanized Pipe End Cap

Galvanized Pipes End Caps

Carbon Steel End Cap

Carbon Steel End Caps

Buttweld End Cap

Buttweld End Caps

Stainless Steel Pipe Cap

Stainless Steel Pipes Caps

Seamless Pipe End Cap

Seamless Pipes End Caps

Copper Pipe End Cap

Copper Pipes End Caps

Brass Pipe End Cap

Brass Pipes End Caps


Pipe Cap Standard


  • EN 10253-2 Caps
  • EN 10253-4 Caps
  • JIS B2312 Caps
  • MSS SP-75 Caps
  • BS 4825 Caps
  • DIN 2605 Caps

Application Of Welded Pipe Cap


  • Galvanized Pipes End Caps For Oil And Gas Industry
  • Carbon Steel End Caps For Nuclear Power/ Nuclear Plants
  • Stainless Steel Pipes Caps For Marine Applications
  • Buttweld End Caps For Industrial Boilers

Working Pressure Of End Cap Pipe Fittings ANSI/ASME B16.9


Limits Of Service TemperatureLimits Of Pressure
Steam And condensate (max.) 366oF (186oC),
(min.) 0oF (-18oC)
150 psig (1000 kPa)
gases & vapors, Air (max.) 200oF (93oC),
(min.) 0oF (-18oC)
150 psig (1000 kPa)
Nonflammable Liquids (max.) 250oF (121oC),
(min.) 0oF (-18oC)
350 psig (2300 kPa)

EN 10253 End Cap Outline Drawing For Square Pipe Dimensions, Packaging Of Aluminium End Caps.

Technical Drawings Of ASME B16.9 Pipe Cap


Technical Drawings Of ASME B16.9 Pipe Cap

End Cap Outline Drawing For Square Pipe Dimensions


End Cap Outline Drawing For Square Pipe Dimensions
(W) (W)1 (T)1
Max. To Min.
(W)2
Max. To Min.
(M) (T) (H)2 (H)1 (H) Allowable Load
(kN)
Mass
(g)
20 20 1.5 to 2 17 to 16 M6 × 1 5 5 5 34 3 10
M8 × 1.25 6.5 11
M10 × 1.5 8 1 10 33 16
25 25 1 to 1.5 23 to 22 M8 × 1.25 6.5 5 5 34 17
1.5 22 M10 × 1.5 8 33 21
30 30 1.5 to 2 27 to 26 M8 × 1.25 6.5 5 5 34 20
M10 × 1.5 8 24

4 Inch Pipe Cap Tolerance Chart


For all Buttweld Pipes fittings ASME B16.9 Cap
NPS Of End Caps O.D. For (Outside Daimeter) Ø at Bevel I.D. For (Inside Daimeter) Ø at End Wall Thick.
t / t1
Overall Length (E)
1/2 a 2 1/2 1 0,8 Not 4
3 a 3 1/2 1 1,6 less 4
4 +2 -1 1,6 than 4
5 a 6 +3 -1 1,6 87,50% 7
8 2 1,6 of nominal 7
10 +4 -3 3,2 tickness 7
12 a 18 +4 -3 3,2   7
20 a 24 +6 -5 4,8   7
26 a 30 +7 -5 4,8   10
32 a 48 +7 -5 4,8   10